Maintenance Technician II - 1st Shift

oshkoshcorporation

Dodge Center (MN)

On-site

USD 29,000 - 40,000

Full time

5 days ago
Be an early applicant

Get more replies from employers

Send a job-specific resume in minutes.

Job summary

Oshkosh Corporation's McNeilus division is seeking a Facility Maintenance Technician to maintain production equipment, heavy machinery, and the overall facility. You will troubleshoot electrical, plumbing, hydraulic, and HVAC systems, perform preventive maintenance, and assist in training new employees.

This role requires three years of related experience or equivalent, forklift certification, and a strong hands-on skill set with lasers, plasma cutters, and other production equipment.

Qualifications

  • Three (3) years of applicable position experience or an evaluated equivalent.
  • Forklift certified.

Responsibilities

  • Check and review work orders and complete tasks on a priority basis.
  • Inspect and troubleshoot electrical, plumbing, hydraulic and mechanical problems.
  • Replace and repair worn-out, broken, and damaged components, equipment, and parts.
  • Operate a crane/hoist for heavy lifting.
  • Operate and repair facility vehicles safely.
  • Handle wires and hardware.
  • Enter data into computer program as needed.
  • Assist in training new employees.

Skills

3 years experience
Forklift certified

Education

High School Diploma or GED
Associate degree in Electromechanical Technology

Tools

Lasers
Plasma cutting
Break presses
Dust collection system
HVAC units
Paint booths

Job description

About McNeilus, an Oshkosh Company

McNeilus Truck and Manufacturing Inc. is committed to serving everyday heroes and is an industry leading designer and manufacturer of refuse truck bodies. McNeilus produces a complete line of high-performance rear load, front load, and automated side load refuse bodies to augment any refuse collection fleet. Our team members are critical in our mission of supporting waste warriors and keeping communities safe and clean.

JOB SUMMARY

The Facility Maintenance Technician is responsible for a wide variety of maintenance work on production equipment, industrial type heavy machinery, factory vehicles, and the overall facility. The employee must be able to troubleshoot electrical, plumbing, hydraulic, HVAC and mechanical problems. They assist in training new employees and must maintain a clean and safe working environment.

Pay Range: $21 - $29.12

YOUR IMPACT
  • Check and review work orders and complete tasks on a priority basis.
  • Inspect and troubleshoot electrical, plumbing, hydraulic and mechanical problems.
  • Replace and/or repair worn-out, broken, and damaged components, equipment, and parts.
  • Operate a crane/hoist for heavy lifting.
  • Operate and repair forklift, tow motor, tractors, and other facility vehicles safely.
  • Handle wires and hardware.
  • Report repair statuses to department supervisors.
  • Communicate using handheld radios with other maintenance personnel.
  • Assist co-workers with heavy lifting of parts.
  • Complete all the assigned PM's for the production equipment on time and safely.
  • Enter data into computer program as needed.
  • Assist in training new employees.
MINIMUM QUALIFICATIONS
  • Three (3) years of applicable position experience or an evaluated equivalent.
  • Forklift Certified.
STANDOUT QUALIFICATIONS
  • High School Diploma or GED.
  • Knowledge in welding, metal fabrication, and/or technical equipment.
  • Associate degree in Electromechanical Technology or equivalent Associate degree.
  • Non-Licensed Maintenance Electrical license.
  • Computer skills especially knowledge of MS-office package.
  • Experience with maintenance on various types of production equipment such as lasers, plasma cutting machines, break presses, dust collection system, HVAC units, blast and paint booths, etc.
CORE COMPETENCIES
  • Internal Contacts: Contact with peers and others involving explanation of information (these contacts may be within or outside department or division), and the gathering of factual information; may include the communication of sensitive or confidential information.
  • External Contacts: Limited external contact to: gather information, answer queries, or ask assistance.
  • Communication Skills: Read, write and comprehend simple instructions, short correspondence and memos. Read and interpret safety rules, operating/maintenance instructions and procedure manuals. Read, analyze and interpret business manuals, technical procedures and/or government regulations.
  • Decision-Making: Requires minimal decision-making responsibility.
  • Complexity, Judgment and Problem Solving: Work of a relatively routine nature. Requires the ability to understand the follow instructions.
WORKING CONDITIONS
Physical Demands
  • Frequent: Standing, Walking/Running, Sitting, Reaching, Hearing, Talking, Visual, Typing; Occasional: Climbing, Driving, Bending/Kneeling, Hearing, Talking, Visual, Typing, Fine Dexterity, Manual Dexterity; Upper Extremity Repetitive Motion, Lifting/Carrying 25lbs., Pushing/Pulling 25llbs.
Non-Physical Demands
  • Occasional: Analysis/Reasoning, Communication/Interpretation, Math/Mental Computation, Reading, Sustained Mental Activity (i.e. auditing, problem solving, grant writing, composing reports), Writing.
Environmental Demands
  • Occasional: Work Alone, Frequent Task Changes, Tedious/Exacting Work, Dust, Temperature Extremes, Loud Noises.
Work Schedule
  • Routine shift hours. Infrequent overtime, weekend, or shift rotation.
Demands/Deadlines
  • Occasional stress due to deadlines or workload because of intermittent or cyclical work pressures, or occasional exposure to distressed individuals within the immediate work environment.

Oshkosh is committed to working with and offering reasonable accommodations to job applicants with disabilities. If you need assistance or an accommodation due to a disability for any part of the recruitment process, please contact our talent acquisition team by email corporatetalentacquisition@oshkoshcorp.com .

Oshkosh Corporation is a merit-based Equal Opportunity Employer. Job opportunities are open for application to all qualified individuals and selection decisions are made without regard to race, color, religion, sex, national origin, age, disability, veteran status, or other protected characteristic. To the extent that information is provided or collected regarding categories as provided by law it will in no way affect the decision regarding an employment application.

Oshko

Get your free, confidential resume review.
or drag and drop your file here.
Similar jobs

Similar jobs worth comparing

Maintenance Technician II - 1st Shift
Maintenance Technician II - 1st Shift

McNeilus Truck and Manufacturing, Inc. • Dodge Center (MN)

On-site
USD 29,000 - 40,000
Maintenance Technician II - 1st Shift
Maintenance Technician II - 1st Shift

Oshkosh Corporation, Inc. • Dodge Center (MN)

On-site
USD 29,000 - 40,000
Industrial Maintenance Technician - Weekend Shift
Industrial Maintenance Technician - Weekend Shift

McNeilus Truck and Manufacturing, Inc. • Riceville (IA)

On-site
Competitive pay
Shift differentials for weekends
Maintenance Technician II - $2,000 Sign On Bonus
Maintenance Technician II - $2,000 Sign On Bonus

Oshkosh Corporation, Inc. • Dodge Center (MN)

On-site
USD 29,000 - 40,000
Yard Maintenance Technician - 1st Shift
Yard Maintenance Technician - 1st Shift

Oshkosh Corporation, Inc. • Dodge Center (MN)

On-site
Facilities Maintenance Tech I - 2nd shift
Facilities Maintenance Tech I - 2nd shift

Oshkosh Corporation, Inc. • Iowa (LA)

On-site
Automation Technician - Mechatronics/Robotics - 1st Shift
Automation Technician - Mechatronics/Robotics - 1st Shift

McNeilus Truck and Manufacturing, Inc. • Dodge Center (MN)

On-site
Machine Operator - 1st Shift
Machine Operator - 1st Shift

McNeilus Truck and Manufacturing, Inc. • Riceville (IA)

On-site
USD 28,000 - 34,000
Heavy Duty EV Technician
Heavy Duty EV Technician

oshkoshcorporation • Murfreesboro (TN)

On-site
USD 60,000 - 90,000
Medical benefits
Dental benefits
Vision benefits
+8
Welder II - 1st and 2nd Shift
Welder II - 1st and 2nd Shift

Oshkosh Corporation, Inc. • Riceville (IA)

On-site
USD 29,000 - 40,000