Maintenance Technician I (Nights - Rotational Schedule) $500 HIRING BONUS!

WinCup; Tolleson (AZ); On-site; USD 25,000 - 39,000; Full time

Benefits offered by this job

Hiring bonus

Medical insurance

Dental insurance

Vision insurance

Life insurance

PTO / Holidays

Disability

401(k) with company match

Job summary

WinCup is seeking a Maintenance Technician I for the Tolleson, AZ site on a night shift (6:00 PM–6:00 AM) with a $3 shift differential. The role focuses on troubleshooting and maintaining packaging and production equipment to maximize uptime and minimize scrap.

Strong mechanical aptitude and safe work practices are essential. Responsibilities include diagnostic assessments, equipment adjustments, safety compliance, and collaboration with the production team.

Qualifications

• High School Diploma or GED preferred.
• Two years of maintenance experience in a manufacturing environment.
• Must read, write and speak English with good oral and written communication.

Responsibilities

• Troubleshoot and adjust production and packaging equipment for optimum efficiency.
• Perform mechanical checks and maintain cycle settings to ensure quality with minimal scrap.
• Follow safety rules and perform LOTO as required.
• Diagnose machine malfunctions and implement corrections to keep lines running.
• Complete inspector checks and document findings; assist with rework when needed.
• Maintain clean, safe work area and inform leadership of quality issues.

Skills

Mechanical aptitude

Planning and organizing

Team collaboration

Multi-tasking

English language skills

Education

High School Diploma or GED

Tools

Forklift operation

Densifier

Melter

Baler

Job description

- Tolleson, AZ

This position offers a HIRING BONUS of $500 for new hires, see HR for terms and conditions. WinCup is a foodservice packaging company focused on providing our customers and consumers the highest quality products allowing them to enjoy the beverages and foods they love, whether at home, or on the go.

Maintenance Technician I - Tolleson, AZ This position offers a HIRING BONUS of $500 for new hires, see HR for terms and conditions. WinCup is a foodservice packaging company focused on providing our customers and consumers the highest quality products allowing them to enjoy the beverages and foods they love, whether at home, or on the go. Trusted since 1962, WinCup was established in 1962 and is now a leading manufacturer passionately transitioning into an innovative, technology driven enterprise focused on creating superior products and brands directly addressing plastic pollution. WinCup is driven by our Vio biodegradable foam technology. Our Phade line of PHA based straws and stirrers is the only Marine Biodegradable, Home and Industrial Compostable straws and stirrers in the world! We are passionately committed to the environment, excellence, innovation and growth. For additional information regarding WinCup and our ground-breaking and environmentally friendly products, check us out at: https://WinCup.com https://PhadeProducts.com https://viofoam.com/

We are a dynamic, diverse and inclusive team bound together by our shared

Values

• One Team
• Performance Based; Rewards & Recognition Driven
• Excellence in All We Do
• Respectful and Engaged Leadership
• Always Do the Right Thing

Here at WinCup we are proud to offer our valued, full-time Team Members a competitive, comprehensive compensation and benefits package with most benefit eligibility beginning just 31 days post hire, including medical, dental, vision and life insurance plans.

• We also offer paid time off (PTO) and holidays, short & long-term disability, and an Team Member Assistance Plan (EAP).
• And, to top it off, we offer a 401(k) plan with a generous company match available after only 60 days of employment.

So, if you are passionate about working on exceptional brands driven by innovation that will leave a lasting and positive impact on the environment, keep reading to see if you think you might make a great addition to our growing team!

Job Title: Maintenance Technician I (Nights Rotational Schedule)

Department: Production

Supervisor’s Title: Production Supervisor

Location: Tolleson, AZ

Work Type: On-Site (Not a Remote Position)

Night Schedule 6:00 PM to 6:00 AM, plus $3 shift differential.

Job Summary

The Maintenance Mechanic I is responsible for the troubleshooting and maintenance adjustments of production and packaging equipment to ensure all equipment is operating at optimum efficiency with minimal scrap. High urgency, critical thinking, and strong mechanical aptitude is required for this position.

Essential Duties & Responsibilities

• Performs timely mechanical checks on all assigned equipment to ensure proper adjustments are maintained.
• Maintains established cycle settings on assigned machines to ensure production quality with minimal scrap.
• Comply with all safety rules, policies, procedures and practices to include performing LOTO of production equipment when required.
• Performs equipment evaluations at the start of the shift to ensure production flow is consistent throughout.
• Diagnose and determine cause for machine malfunctions along with making troubleshooting adjustments to assigned machines.
• Answer all buzzers and bells with the highest sense of urgency to ensure production is not interrupted.
• Perform all assigned quality tests on baggers, packaged products, film, print, etc. to inspect for defects and malfunctions every hour. Must document findings on the inspector checklist.
• Perform daily inspector checks to ensure the testers are rejecting defective products.
• Responsible for all film roll changeovers and organization of film racks daily.
• Responsible for informing the leadership team immediately of any failure to meet established quality standards to ensure that corrective action is taken.
• Maintain a safe and clean work area and equipment at all times.
• Assist packers with rework when time permits.
• Performs other duties as assigned by the Production Lead, Team Supervisor or Department Manager.

The list of job requirements above is not intended to be exhaustive and all inclusive. The Company reserves the right to revise this job description as needed to comply with actual job requirements.

Qualifications:

Education:

• High School Diploma or GED preferred.

Experience:

• Must have a sound mechanical aptitude.
• Two years of maintenance experience in a manufacturing environment.

Core Skills and Competencies:

• Planning and Organizing: Demonstrates ability to function independently and have a sense of urgency by planning and organizing your own activities, managing work time efficiently; follow procedures and policies; perform basic mathematical calculations, identify and solve problems.
• Collaborate and Coordinate: Demonstrates an ability to effectively collaborate and coordinate with other department personnel and internal support. This includes utilizing all WinCup resources at your disposal to effectively handle production issues and support.
• Strong multi-tasking and prioritization skills: Must be detail oriented, a team player and highly deadline driven.
• Basic computer skills, must read, write and speak English and have good oral and written communication skills.

Physical Demands (Manufacturing Plant)

• Team Member will frequently be required to actively listen and exchange information.
• Team Member will be required to observe and assess information in a fast paced environment.
• Requires frequent use of a production, manufacturing equipment and/or machinery, including forklift, densifier, melter and baler.
• Team Member may be required to ride or stand on a moving forklift.
• Will be required to frequently move/transport materials weighing up to 50 pounds, which may require frequent bending, twisting and reaching motions up to a distance of 100 yards.
• Team Member may be required to remain stationary for extended periods of time.
• Team Member may be required to stand/sit for long periods up to 8, 10 or 12 hours shift.
• Team Member may be required to talk, walk, sit; use hands to manually inspect, grasp, handle and feel objects, tools, and controls; reach with hands and arms; lift, pull, push, stoop, kneel, bend, crawl or crouch.

Working Conditions (Manufacturing Plant)

• Workspace contains moving mechanical parts.
• Requires work in an indoor manufacturing environment that may be exposed to extreme heat that is not air conditioned.
• Work environment contains loud noises and odors that may last for long periods of time or on a continual basis as well as occasional airborne particles.
• Must wear PPE while working, which includes hairnet, hearing protection and safety glasses with side guards at all times.
• Ability to work an 8+, 10+ or 12+ hour shifts as designated.
• Able to work weekdays, weekends and overtime as designated.

WinCup reserves the right to revise or update this job description as needed to better comply with the actual essential function of the job requirements as business needs dictate.

Pre-employment Requirements

Employment is contingent upon successful completion of e-verify, a drug screening and background check.

WinCup is an EEO/AA and E-Verify employer. At WinCup we are committed to building a diverse and inclusive workplace that embraces the diversity and strengths of our Team Members, our customers, and community.

We welcome and consider applications from all qualified candidates, regardless of their race, gender, sexual orientation, religion, disability or any other protected characteristic. We firmly believe that a diverse organization creates opportunities for all individuals to showcase their talents, both independently and collaboratively. Diversity fuels our ability to be truly innovative by embodying our values, driving our success, and fostering an environment where every Team Member can thrive and perform at their very best.

To ensure the safety of our team members in the workplace, we perform background and drug screenings.

Thank you for considering WinCup and helping us make a difference!