Maintenance Technician I - III

FedEx Group; Indianapolis (IN); Hybrid; USD 28,000 - 52,000; Full time

Benefits offered by this job

Pay transparency

Comprehensive benefits

Job summary

Federal Express Corporation seeks a Tech III level technician to perform preventative and predictive maintenance, troubleshooting and repair of material handling systems. You will work with mechanical power transmission, electrical and PLC/controls, reading schematics and manuals to diagnose faults and escalate as needed.

You may develop scopes of work for small local projects, guide lower level techs, and ensure safety standards are followed on the shop floor. Training provided.

Qualifications

• High school diploma or GED required; certificates in Industrial Maintenance/Mechatronics or electrical/mechanical trade are preferred.
• Four (4) years in Industrial Maintenance with proficiency in mechanical power transmission, electrical and PLC/controls; welding/fabrication skills.
• Ability to read electrical/mechanical schematics and manuals; troubleshoot and repair system faults; ability to interpret engineering specifications.

Responsibilities

• Provide preventative and predictive maintenance, troubleshooting and repair of material handling systems.
• Interpret schematics, manuals, and specifications to diagnose faults or escalate.
• Utilize EAM software to enter and retrieve prescribed data.
• Read and interpret electrical/mechanical drawings; troubleshoot motor controls circuits.
• May develop scopes of work for small projects and assist lower level technicians.

Skills

Mechanical power transmission

Electrical

PLC/Controls

Welding/Fabrication

Troubleshooting

Schematic interpretation

EAM software

Communication

Time management

Education

High School Diploma or GED

Industrial Maintenance/Mechatronics certs

Associate degree preferred

Tools

EAM software

Microsoft Office

Job description

ESSEN TIAL FUECTIOS

• Under minimal supervision, provides preventative and predictive maintenance, troubleshooting and repair of material handling systems through demonstrated proficiency in mechanical power transmission and electrical with working knowledge of PLC/controls and welding/fabrication
• Adheres to all applicable safety standards and promotes a safe work environment by attending safety meetings and required trainings and addressing all safety concerns
• Will interpret electrical or mechanical schematics, manufacturer’s manuals and engineering specifications to troubleshoot, diagnose and repair system faults and failures or determine escalation
• Responds to sort calls to diagnose problems and make repairs
• Ability to utilize the Enterprise Asset Management (EAM) software to enter and retrieve prescribed data
• Complex skills required in diagnosing and troubleshooting mechanical, electrical and/or PLC/controls failures
• May rely on higher level Technicians in complex control systems issues
• May begin to read PLC and have the ability to burn EEPROMs
• May begin to assist lower level technicians
• May begin to develop scopes of work and project plans for small scale projects to be executed at a local level
• May be required to work a flexible schedule including all days and shifts as the business need dictates.
• Performs other duties as assigned

Examples of what you can expect to learn in the Tech III level (does not include all areas/responsibilities).

Mechanical

• Understand power transmission concepts, such as gear ratios, service factor, horsepower and frame size to repair/replace a failed gearbox and/or motor when the correct replacement parts are not available
• Understand mechanical design concepts to be able to replace failed pulleys and bearings with replacements that don’t match design without impacting performance of a conveyor (speed, torque, etc.)
• Can read, interpret and create or modify mechanical drawings

Electrical

• Use a digital multimeter to resistance test de-energized circuits.
• Troubleshoot and diagnose both the power and the control branch of motor controls circuits.
• Read, interpret and create or modify electrical drawings/schematics

PLC/Controls

• Go online with PLC processors to aid in troubleshooting
• Burn EEPROMs
• Understand PLC networks, such as ControlNet, DeviceNet, etc.

Welding or Fabrication

• MIG, stick and TIG weld in all positions.
• Understand difference between structural and non-structural welds and when to apply them
• Repair broken components where factors such as position or load may impact the repair, such as motor mounting plates or conveyor legs.
• Use vertical mill/drill and other machining tools

MINIMUM EDUCATION

• High School Diploma or GED required
• Certificates in Industrial Maintenance/Mechatronics, electrical or mechanical trade or related area and an associate degree in a related area preferred.

MINIMUM EXPERIENCE

• Four (4) years experience in Industrial Maintenance with proficiency in knowledge and demonstrated skills in mechanical power transmission, electrical and working knowledge of PLC/Controls and welding/fabrication skills through job experience, related military experience and/or related education required.
• Multiple certificates and degrees may be assessed by manager and HR to determine relevancy to minimum qualifications and experience

KNOWLEDGE, SKILLS AND ABILITIES

• Ability to follow procedures as directed by work orders or high-level technicians/management
• Ability to interpret electrical or mechanical schematics, manufacturer’s manuals and engineering specifications to troubleshoot, diagnose and repair system faults and failures or determine escalation
• Ability to utilize the Enterprise Asset Management (EAM) software to enter and retrieve prescribed data
• Ability to solve mechanical or electrical problems, which may include understanding of engineering formulas
• Ability to diagnose mechanical power transmission, electrical or PLC/controls issues by troubleshooting at multiple component and system level
• Effective verbal and written communication within own department to peers, managers, and outside vendors to convey technical data and needs
• Need to collaborate successfully with department, operations, vendors and support teams that failures or projects may require
• Software skills, including Microsoft Office suite and other web-based applications

• Possess time management and organizational skills

JOB CONDITIONS

• Will need to use hand tools and possibly power tools
• May be working in hot or cold temperatures
• May need to stand, walk, bend, stoop and squat

Preferred Qualifications:

Pay Transparency: $20.35 - $38.43

Pay:

For details on our comprehensive benefits, click here.

Federal Express Corporation is an Equal Opportunity Employer including, Vets/Disability.

Reasonable accommodations are available for qualified individuals with disabilities throughout the application process. Applicants who require reasonable accommodations in the application or hiring process should contact [e-mail].

Applicants have rights under Federal Employment Laws:

• Know Your Rights
• Pay Transparency
• Family and Medical Leave Act (FMLA)
• Employee Polygraph Protection Act

E-Verify Program Participant: Federal Express Corporation participates in the Department of Homeland Security U.S. Citizenship and Immigration Services’ E-Verify program (For U.S. applicants and employees only). Please click below to learn more about the E-Verify program:

• E-Verify Notice (bilingual)
• Right to Work Notice (English) / (Spanish)