Maintenance Technician

Dover Corp; Madison (IN); On-site; USD 42,000 - 68,000; Full time

Job summary

Dover Corp in the United States is seeking a Maintenance Technician to assist with installation, repair, and preventive maintenance of manufacturing and facilities equipment. You will support production and drive continuous improvement through RCA using Dover methods.

Candidates should have experience with mechanical, electrical, hydraulic systems, and the ability to operate ladders and lifting devices. The role requires safety discipline and the ability to work overtime as needed.

Qualifications

• Must have 2–6 years verifiable experience in mechanical, hydraulic, electrical or megatronics.
• Ability to read electrical, hydraulic and mechanical schematics.
• High school diploma; college or trade certificates are a plus.

Responsibilities

• Follow safety-first methods to avoid injury, use PPE and follow LOTO rules.
• Respond quickly to maintenance requests from leadership and ops teams.
• Keep work areas clean and organized through proper housekeeping.
• Operate motorized equipment such as scissor lifts and forklifts.
• Lubricate and oil machinery as needed to prevent wear.
• Perform preventive maintenance on equipment and document it.
• Repair bearings, relays, switches, and gearboxes as needed.
• Install and maintain pipe systems, hydraulic/pneumatic lines and valves.
• Work from ladders/heights and perform required welding as needed.
• Complete maintenance and electrical repairs; log hours in CMMS.
• Assist in installation or relocation of machinery; ensure proper setup.
• Conduct root-cause analysis using Dover fast problem-solving methods.

Skills

Electrical schematics

Hydraulic systems

Troubleshooting

Tools

Voltage Tester

V.O.M. (Analog)

Welder Hood

Mechanical tools

Job description

SUMMARY:

Assist with Installation, repair, and maintenance of all manufacturing, facilities, and infrastructure machinery and systems. Perform necessary preventive maintenance to equipment and provide support to production in consistent conformance with customer expectations. Support all continuous improvement activities.

ESSENTIAL JOB FUNCTIONS INCLUDE:

1. Follow safety first work methods and procedures to avoid injury to self and co-workers or damage to company property, including use of all required personal protective equipment, following safety precautions (e.g. LOTO), ensuring proper machine guards, etc.

2. Provide quick response to maintenance requests and calls from maintenance leadership and manufacturing operations teams.

3. Follow proper housekeeping standards to ensure clean and organized maintenance work areas.

4. Operate motorized equipment, including but not limited to scissor lifts, JLGs, fork trucks, etc.

5. Lubricate and oil machinery as needed.

6. Perform necessary preventive maintenance to all equipment to ensure proper operation. Document all preventive maintenance.

7. Make necessary repairs to equipment such as replacing bearings, repairing relays, switches and gearboxes, etc.

8. Assist in Installation and maintenance of pipe systems and related hydraulic, pneumatic, Water, welding gas equipment. Repairs and replaces gauges, valves, and pressure regulators.

9. Must be able to work from ladders, lifts, and at different heights to perform duties.

10. Perform any required maintenance welding, using electric arc or gas processes as needed.

11. Performs minor repairs and maintains physical structure of facility.

12. Perform minor facility electrical repairs.

13. Assist in the Install of new machinery, and relocation of machinery as needed; ensure machinery is set up properly.

14. Complete work assignments as directed.

15. Logging work hours in CMMS system

16. Assist in root cause analysis utilizing Dover fast problem-solving methodology.

17. Other duties as assigned.

Other Functions:

18. Safety: Observe and maintain all safety requirements. Facilitate safe work practices and contribute resources to creating a safe work environment. Participate in in-house safety program or with the safety committees as needed.

19. Ethics & Work Standards: Maintain the highest ethical and work standards, while promoting the same attributes in co-workers and others. Ensure that all business activities - with both internal and external customers - be performed with a professional demeanor and that all participants be held accountable to this high standard.

20. Communication: Expresses thoughts clearly, both orally and in writing, using good grammar. Presents concise, well-organized reports. Listens to understand input, feedback and concerns. Provides complete information in an open, honest, and straight-forward manner. Responds promptly and positively to questions and requests.

21. Teamwork/Relationships: Works with other employees willingly and in a spirit of cooperation, and teamwork. Supports cooperation. Demonstrates a commitment to the entire business and is supportive of all initiatives (company and departmental) to help grow VSG's business in the U.S. and abroad. Cooperates fully with others to achieve organizational goals. Is tactful, courteous, and considerate. Embraces a positive outlook. Is respected and trusted by others.

22. Continual Improvement and Problem Resolution: Identifies and communicates suggestions for work improvements. Uses technical/analytical abilities to assure existing work practices are the most efficient and cost effective possible. Performs root-cause analysis and implements viable, permanent solutions to problems. Works with both internal and external customers to develop solutions which meet company-wide needs and objectives. Applies a sense of urgency to resolve problems or create opportunities that will increase productivity and create value. Shares best practices with other employees across the business.

23. Accountability: Accepts responsibility and accountability for both the strategic planning and the successful implementation of all projects/programs/duties as outlined in this job description. Advises supervisor of concerns, problems and progress of work in a timely manner. Demonstrates a sound balance between quality and quantity of work while maintaining a sense of urgency toward completion. Deadlines are met.

24. Maintenance Log: Update necessary logs and check sheets to ensure preventive maintenance files are accurate and OSHA requirements are met.

25. Training: Willingness to upgrade electrical/mechanical skill set both on and off the job.

Working Conditions:

Perform the essential functions of the position, with or without an accommodation, including, but not limited to:

• Perform work in a loud/noisy environment.
• Change shifts and work overtime and weekends, as required.
• Work with parts/equipment which may be hot, cold, and/or wet.
• Work outside in all weather conditions and work at heights
• Use a wide range of powered tools and hand tools and vibratory tools/equipment.
• Prolonged standing, frequently handling various parts for assembly, frequent walking, reaching at waist level, pushing/pulling, grasping/squeezing, pinching.
• Have fine motor dexterity, neck flexion, and be able to use air tools.
• Be able to reach overhead, reach at shoulder level, reach at knee and floor level.
• Bending, stooping, squatting, crouching, kneeling, crawling, ladder/stair climbing, pivoting, twisting, neck extension/rotation, shoulder circumduction, lying supine and using vibratory tools also required
• Handling and lifting of parts and/or equipment (lifting 50 lbs. occasionally, 35 lbs. frequently and repetitive pushing/pulling) as needed.

CONTACTS (Internal and External):

Interacts extensively with all manufacturing personnel and on an occasional basis with other functional areas within the Business Unit.

JOB SPECIFICATIONS:

Education: High school graduate with at least 2-6 years of verifiable experience in three of the following mechanical, machine shop, hydraulic, electrical or megatronics disciplines. College or trade school degree and certificates are a plus.

Experience: Must be able to read and understand electrical, hydraulic and mechanical schematics and apply them to repair equipment and to order necessary parts. Must be able to troubleshoot mechanical, hydraulic and relay logic controls.

Personal Tool Requirements: Following is a list of tools employee must provide to perform this job.

• Welder Hood
• Mechanical Tools Necessary to Perform Job per tool list.
• Voltage Tester
• V.O.M. (Analog satisfactory)

Supervision: Reports to Maintenance Supervisor or Maintenance Manager for job assignments and instructions. Must be willing to work shifts, weekends, and holidays as needed.

Responsibility: Exercises moderate degree of judgment. Questionable matters referred to the supervisor for assistance.

The above description represents a general synopsis of the principal functions of the job and should not be construed as a comprehensive listing of all requirements that may be inherent in the job.