Maintenance Technician

Apace Ky LLC

Fountain Run (KY)

On-site

USD 42,000 - 68,000

Full time

14 days+

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Apace Ky LLC is seeking a maintenance-focused individual to ensure packaging equipment runs safely and efficiently, with a focus on preventive maintenance and timely repairs. The role collaborates across departments to meet regulatory requirements and production standards.

The candidate should read gauges and measurements, operate hand/power tools, and adapt to 12-hour night shifts (Mon-Thu 5:00 PM–5:00 AM). Framing the shift schedule, Friday work may be required based on production needs.

Qualifications

  • Must read and comprehend weight and measuring devices.
  • Must be responsible and self-motivated.
  • Must demonstrate manual dexterity and attention to details
  • Knowledge of compressed air / pneumatics, electrical single and three phase, control circuits, sensors, cylinders, and conveyors.
  • Must be able to work with all types of hand tools and power tools normally used on maintaining equipment and or facility.
  • Must always follow rules and instructions, adhere to high standards set forth by management and Apace Packaging.
  • Must be able to multitask and work with multiple personalities.
  • Education and/or Experience: High School or equivalent.
  • Language Skills: English.

Responsibilities

  • Must work safely and follow all safety procedures and processes.
  • Must keep all equipment in proper working condition with as few delays to production as possible.
  • Must keep all preventative maintenance up to date.
  • Must be able to notice missing preventative maintenance opportunities and update them.
  • Must keep scheduled monthly maintenance up to date and documented.
  • Must be able to perform unscheduled/corrective maintenance on equipment when needed and fill out related forms.
  • Must set up equipment for changeovers with limited delays in production startups.
  • Must keep work area and tools clean and orderly.
  • Must be able to communicate efficiently.
  • Must be able to record work effectively and efficiently.
  • From time to time fill in for production personnel at any position on the production line.
  • When maintenance issues arise, must work required hours to assist in getting equipment installed/repaired quickly.
  • Responsible for installing and assisting other personnel in the installation of new systems.
  • Demonstrate Integrity / Results / Teamwork / Passion / Positive Attitude / Continuous Improvement
  • Any job within our capabilities that needs doing to ensure customers get the products and service they deserve and need when they need it for our success.

Skills

Reading gauges
Self-motivated
Manual dexterity
Attention to detail
Safety awareness
Multitasking
Teamwork
Communication

Education

High School diploma or equivalent

Tools

Hand tools
Power tools
Pneumatics
Electrical systems
Conveyors

Job description

The outline of these duties has some specific requirements. This position must always be alert and aware of the packaging processes to ensure that the highest quality of production is offered to the customer correctly and without delay. This position works closely with all departments to ensure all regulations and requirements are met.

Schedule
  • Night Shift: Monday-Thursday, 5:00 PM-5:00 AM
  • 12-hour shifts are mandatory
  • Fridays may be required based on production needs.
Essential Duties and Responsibilities

1. Must work safely and follow all safety procedures and processes.

2. Must keep all equipment in proper working condition with as few delays to the production of the product as possible.

3. Must keep all preventative maintenance up to date.

4. Must be able to notice missing preventative maintenance opportunities and update them.

5. Must keep scheduled monthly maintenance up to date and documented.

6. Must be able to perform any Unscheduled/Corrective Maintenance on equipment when needed as well as correctly filling out the Unscheduled/Corrective Maintenance Forms.

7. Must be able to set up equipment for changeovers with limited delays in production startups.

8. Must keep work area and tools clean and orderly.

9. Must be able to communicate efficiently.

10. Must be able to record work effectively and efficiently.

11. From time to time fill in for production personnel at any position on the production line.

12. When maintenance issues arise, must be willing to work the required hours to assist in getting the equipment installed and/or repaired to allow production to resume as quickly as possible.

13. Responsible for installing and assisting other personnel in the installation of new systems.

14. Must Demonstrate Integrity / Results / Teamwork / Passion / Positive Attitude / Continuous Improvement

15. Any job within our capabilities that needs doing to ensure our customers get the products and service they deserve and need when they need it for our success.

Qualifications

Must be able to read and comprehend weight and measuring devices.

Must be responsible and be self-motivated.

Must demonstrate manual dexterity and attention to details

Knowledge of Compressed air / pneumatics, electrical single and three phase, control circuits, sensors, cylinders, and conveyors.

Must be able to work with all types of hand tools and power tools normally used on maintaining equipment and or facility.

Must be able to always follow rules and instructions, adhere to the high standards set forth by management and Apace Packaging.

Must be able to multitask and work with multiple personalities.

Education and/or Experience

High School or equivalent.

Language Skills

English

Mathematical Skills

Excellent reasoning ability and math skills are necessary for regulatory compliance.

Reasoning Ability

Ability to ask and learn is a must.

Certificates, Licenses, Registrations, Misc…

None required.

Physical Demands

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is regularly required to use hands and fingers to handle or feel. The employee frequently is required to stand, walk, sit, reach with hands and arms, and talk or hear. The employee is occasionally required to climb stairs and/or ladders or balance and stoop, kneel, crouch, or crawl. The employee must frequently lift and/or move up to 20 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. The employee must be able to perform the essential duties and responsibilities of this position for up to 12 hours per shift as business conditions require.

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.

Work Environment

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.


The night shift schedule for this position is Monday through Thursday, 5:00 PM to 5:00 AM. As production demands fluctuate, Friday shifts may be added as needed to support business operations and meet customer requirements. Candidates should be flexible and prepared to work extended schedules when necessary to ensure consistent production and team success.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Maintenance Technician
Maintenance Technician

ADP, Inc. • Fountain Run (KY)

On-site
USD 42,000 - 64,000
Maintenance Technician
Maintenance Technician

Welch Packaging Group • Wooster (OH)

On-site
USD 52,000 - 76,000
Production Maintenance Technician I 2nd Shift
Production Maintenance Technician I 2nd Shift

Nature's Touch Frozen Foods • Edwardsville (KS)

On-site
USD 41,000 - 50,000
Production Maintenance Technician I 2nd Shift
Production Maintenance Technician I 2nd Shift

Nature's Touch Inc. • Edwardsville (KS)

On-site
USD 30,000 - 47,000
Maintenance Technician - Day Shift
Maintenance Technician - Day Shift

Pregis • Grand Rapids (MI)

On-site
USD 52,000 - 72,000
Maintenance Mechanic I - Weekend E Shift (6:00pm - 6:30am Friday - Sunday)
Maintenance Mechanic I - Weekend E Shift (6:00pm - 6:30am Friday - Sunday)

NOW HEALTH GROUP • Bloomingdale (IL)

On-site
USD 52,000 - 78,000
Maintenance Technician: Night Shift
Maintenance Technician: Night Shift

Silver King Beverage Co • Salt Lake City (UT)

On-site
USD 30,000 - 47,000
Maintenance Mechanic I - 3rd Shift
Maintenance Mechanic I - 3rd Shift

NOW HEALTH GROUP • Bloomingdale (IL)

On-site
USD 70,000 - 90,000
Maintenance Technician: Can Fill-Night Shift
Maintenance Technician: Can Fill-Night Shift

Silver King Beverage Company • Salt Lake City (UT)

On-site
USD 46,000 - 60,000
Maintenance Technician 2nd Shift
Maintenance Technician 2nd Shift

Welch Packaging Group • Lebanon (TN)

On-site
USD 42,000 - 68,000