MAINTENANCE TECH B - 3rd shift

Howmet Aerospace

Bluegrass (TN)

On-site

USD 45,000 - 60,000

Full time

5 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Howmet Aerospace is seeking a dependable Maintenance Technician B to support operations at our Morristown, TN facility. This entry‑level, multi‑craft role works under Senior Technicians while developing skills in electrical, mechanical, hydraulic, pneumatic, and machine repair systems.

The position emphasizes preventive maintenance, troubleshooting, and equipment repair to ensure safe, reliable plant performance. Training and progression opportunities exist toward Senior roles.

Qualifications

  • Completed 2-year Industrial Maintenance degree or certificate or 3+ years multi-craft maintenance experience.
  • High School Diploma or GED.
  • Foundational knowledge of electricity, PLCs, hydraulics, pneumatics, and mechanical systems.
  • Basic computer proficiency including CMMS entry and tablet usage.
  • Ability to lift at least 25 lbs and qualify for a plant lift-truck license.
  • Ability to read, comprehend, and write clear technical instructions.
  • Strong teamwork and communication skills.
  • High degree of manual dexterity and problem-solving ability.
  • Skills in welding, machining, pipefitting, HVAC, millwright work, electronics, PLCs, hydraulics, and pneumatics.

Responsibilities

  • Monitor HVAC, chilled water, and hot-water systems.
  • Perform lubrication changes on compressors, gearboxes, presses, and similar equipment.
  • Conduct routine fire protection tests and compressed-air system checks.
  • Service industrial lift-truck batteries and maintain lubricant/chemical inventory levels.
  • Interpret electrical, mechanical, hydraulic, and pneumatic drawings and schematics.
  • Apply basic shop math to measurements and calibration tasks.
  • Assist Senior Technicians with diagnostics and repairs across electrical, PLC, hydraulic, and pneumatic systems.
  • Perform independent repairs once qualified through training.
  • Enter and document preventive maintenance activities in the CMMS using computers or tablets.
  • Maintain a clean, safe, and organized work area following 5S practices.
  • Report unusual equipment conditions to the Maintenance Facilitator or Senior Technicians.
  • Demonstrate strong attendance, safe work habits, and urgency in completing assignments.

Skills

3+ years multi-craft maintenance
Basic electricity
PLC fundamentals
Hydraulics
Pneumatics
Mechanical systems
Reading technical instructions
Teamwork & communication
Manual dexterity
Welding
Machining
Pipefitting
HVAC
Electronics
PLCs
Hydraulics & pneumatics

Education

2-year Industrial Maintenance degree or certificate
High School Diploma or GED

Tools

CMMS
Tablet usage

Job description

  • Locations 5650 Commerce Blvd, Morristown, TN, 37814, US (On-site)
  • Job Schedule Full time
  • Remote Work Schedule Availability? None
  • Export-Controlled Data This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items
Responsibilities

About the Role

Howmet Aerospace is seeking a dependable and motivated Maintenance Technician B to support operations at our Morristown, TN facility. This entry‑level multi‑craft maintenance role works under the direction of Senior Maintenance Technicians while developing core skills in electrical, mechanical, hydraulic, pneumatic, and machine repair systems. The position plays a key role in ensuring safe, reliable, and efficient plant performance through preventive maintenance, troubleshooting, and equipment repair.

Key Responsibilities

  • Monitor HVAC, chilled water, and hot‑water systems
  • Perform lubrication changes on compressors, gearboxes, presses, and similar equipment
  • Conduct routine fire protection tests and compressed‑air system checks
  • Service industrial lift‑truck batteries and maintain lubricant/chemical inventory levels
  • Use and maintain personal hand tools and diagnostic equipment including multimeters, oscilloscopes, gauges, and tablet‑based tools
  • Interpret electrical, mechanical, hydraulic, and pneumatic drawings and schematics
  • Apply basic shop math to measurements and calibration tasks
  • Assist Senior Technicians with diagnostics and repairs across electrical, PLC, hydraulic, and pneumatic systems
  • Perform independent repairs once qualified through training
  • Enter and document preventive maintenance activities in the CMMS using computers or tablets
  • Maintain a clean, safe, and organized work area following 5S practices
  • Report unusual equipment conditions to the Maintenance Facilitator or Senior Technicians
  • Demonstrate strong attendance, safe work habits, and urgency in completing assignments

Work Environment Conditions

Must be able to work in an industrial manufacturing environment, including exposure to heat, cold, noise, confined spaces, and extended periods of standing or walking while wearing required PPE.

Must be willing to work assigned shifts, including 2nd or 3rd shift, overtime, weekends, or call‑ins as required. Training may occur on a different shift than the regular assignment.

Qualifications

Minimum Qualifications

  • Completed 2‑year Industrial Maintenance degree or certificate
    OR
    At least 3 years of multi‑craft industrial maintenance experience
  • High School Diploma or GED
  • Foundational knowledge of basic electricity, PLC fundamentals, hydraulics, pneumatics, and mechanical systems
  • Basic computer proficiency, including CMMS entry and tablet usage
  • Ability to lift at least 25 lbs and qualify for a plant lift‑truck license
  • Ability to read, comprehend, and write clear technical instructions
  • Strong teamwork and communication skills
  • High degree of manual dexterity and technical problem‑solving ability
  • Skills in welding, machining, pipefitting, HVAC, millwright work, electronics, PLCs, hydraulics, and pneumatics

EHS & Compliance Requirements

Must comply with all Environmental, Health & Safety (EHS) policies, quality standards, and site procedures, including proper use of PPE and adherence to lockout/tagout requirements.

The Maintenance Technician B role is the foundational step toward advancement into the Multi‑Craft Senior Maintenance Technician position. Technicians typically progress within 1–2 years based on demonstrated competency, training completion, performance, and approval from Maintenance Leadership, Human Resources, and Manufacturing Management.

About Us

Compensation and Benefits:

If a pay range is identified for this job, it is based on a good faith estimate at the time of this posting. Actual compensation is subject to variation due to factors such as education, experience, skillset, market/business considerations, and/or location.

Howmet Aerospace offers a competitive benefits package to support the health, financial well-being, and professional growth of our employees. Benefits include:

  • Comprehensive medical, prescription, dental, and vision benefits coverage, including FSA and HSA account options
  • Pre-tax and Roth 401(k) retirement savings plans offering employer matching funds and a separate employer retirement contribution
  • Paid holidays and vacation time (eligibility, accrual, and usage are discretionary and governed by applicable policies)
  • Paid parental leave and adoption assistance programs
  • Life insurance and disability coverage plans
  • Optional coverage plans for auto, home, legal, identity theft, and pet insurance
  • Tuition Assistance Program and ongoing professional development opportunities
  • Employee Assistance Program (EAP)

Our Story:

Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $8.3 Billion in revenue in 2025, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2025 Environmental Social and Governance report at www.howmet.com/esg-report . Follow: LinkedIn , Twitter , Instagram , Facebook , and YouTube .

Equal Opportunity Employer:

Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

MAINTENANCE TECH B - 3rd shift
MAINTENANCE TECH B - 3rd shift

Howmet Aerospace Inc. • Morristown (TN)

On-site
USD 42,000 - 60,000
Medical benefits
401(k) with match
Paid time off
+5
Maintenance Technician (2nd Shift)
Maintenance Technician (2nd Shift)

Howmet Aerospace Inc. • Waco (TX)

On-site
USD 52,000 - 78,000
Health insurance
401k matching
Paid holidays and vacation
+1
Maintenance Technician - Level 1
Maintenance Technician - Level 1

Howmet Aerospace • Washington (MO)

On-site
USD 52,000 - 75,000
Medical benefits
401(k) retirement plan with employer 

Paid holidays and vacation
Electrical Maintenance Technician
Electrical Maintenance Technician

Howmet Aerospace • Martinsville (VA)

On-site
USD 50,000 - 75,000
Maintenance Technician, 1st Shift
Maintenance Technician, 1st Shift

Howmet Aerospace Inc. • Cleveland (OH)

On-site
USD 41,000 - 55,000
Competitive wages
401k with employer match
Medical, Dental, Disability, Vision, &
Maintenance Technician - 2nd Shift
Maintenance Technician - 2nd Shift

Howmet Aerospace Inc. • Houston (TX)

On-site
USD 60,000 - 86,000
Health benefits
401(k) retirement plan
Paid holidays and vacation
+1
Maintenance Supervisor (3rd shift)
Maintenance Supervisor (3rd shift)

Howmet Aerospace Inc. • Cleveland (OH)

On-site
USD 70,000 - 95,000
Electro-Mechanical Maintenance Technician
Electro-Mechanical Maintenance Technician

Howmet Aerospace Inc. • Indiana

On-site
USD 65,000 - 78,000
Health Insurance from Day One
401(k) Retirement Plan with Company 3%
13 Company-Paid Holidays
+1
Lead Maintenance Supervisor - Lean Manufacturing
Lead Maintenance Supervisor - Lean Manufacturing

Howmet Aerospace Inc. • Cleveland (OH)

On-site
USD 70,000 - 95,000
Technical Operations Supervisor 3rd shift (maintenance and production)
Technical Operations Supervisor 3rd shift (maintenance and production)

Howmet Aerospace Inc. • Cleveland (OH)

On-site
USD 70,000 - 90,000