Maintenance Supervisor - Finishing

External Commonwealth Rolled Products

Lewisport (KY)

On-site

USD 85,000 - 110,000

Full time

4 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Commonwealth Rolled Products is seeking a Maintenance Supervisor to lead the Finishing Maintenance & Engineering team in Lewisport, KY. You will analyze, optimize, and direct maintenance activities to maximize safety, quality, and productivity, while driving a continuous improvement culture.

You will oversee health, safety, and environmental initiatives, coordinate with production, and ensure adherence to labor agreements.

Qualifications

  • High school diploma / GED required.
  • 5+ years related work experience with leadership responsibility.
  • Is technically competent and capable of backfilling team members.
  • Has the ability to understand the manufacturing process and technical knowledge to ensure product quality and flow.
  • Has the ability to understand how activities impact cash conversion, EBITDA and other key financial metrics.
  • Ability to read and interpret safety & HR policies and maintenance instructions.

Responsibilities

  • Leverage the Safety System and Safety Principles to create a zero injury culture.
  • Support safety process implementations and corrective actions.
  • Conduct daily safety crew briefings.
  • Ensure team compliance with health, safety and environmental regulations.
  • Retrain team on procedures according to HSE schedule.
  • Investigate and document safety-related incidents.
  • Ensure daily production goals are supported by the team.
  • Maintain maximum uptime through efficient use of resources and planning.
  • Develop and repair equipment with urgency.
  • Participate in Safety and Production Meetings.
  • Communicate across shifts about equipment concerns and status of work.
  • Coordinate with Superintendent and Production on equipment issues.
  • Ensure deviations from standard processes are communicated to stakeholders.
  • Conduct layered process audits to improve quality and reduce scrap.
  • Complete PMs and work orders on time.
  • Drive standard work and continuous improvement culture.
  • Support cost reduction and yield improvement initiatives.
  • Implement Reliability Roadmap objectives in the area.

Skills

Leadership
Maintenance planning
Safety culture
Root cause analysis
Team coaching

Education

High school diploma or GED
Vocational/technical degree or apprenticeship

Job description

Commonwealth Rolled Products is a leading manufacturer of Aluminum rolled products for the Automotive, Commercial, and Industrial markets. The Company operates its production facility in Lewisport, KY with the support of an Automotive Innovation Center for R&D, Sales and Field Service in Madison Heights (DET), and Inside Sales in the Cleveland, OH area.

Our team is seeking to add a talented Maintenance Supervisor to our Finishing Maintenance & Engineering team. The purpose of this role is to analyze, recommend improvements, efficiently organize and manage the direction of maintenance area work teams and processes for the achievement of both short-term and long-term objectives in safety and compliance, equipment reliability, product quality and cost reduction. This position will monitor and keep production running with the task of maximizing productivity and quality; engage the team to drive a continuous improvement culture to eliminate waste, overburden and variability in manufacturing processes; act as a role model for safety by demonstrating behaviors that align with our safety principles and hold the team accountable for results; and provides leadership, direction, coaching and development to motivate and sustain high levels of employee performance.

Responsibilities Include:

Health, Safety & Environmental

  • Leverage the Commonwealth Rolled Products Safety System and Safety Principles to create a zero injury culture.
  • Support the implementation of processes (safety observations, pre-job minis, housekeeping audits, safety work orders, safety scorecard, etc.) that reveal safety hazards, and develop sustainable corrective actions.
  • Conduct daily safety crew briefings.
  • Ensure that company policies and procedures are being executed by his/her team in order to ensure compliance with all health, safety and environmental regulations (zero EPA non-compliances).
  • Ensure the team is being retrained on the relevant safety procedures in accordance with the HSE Department’s schedule.
  • Investigate and document safety related incidents in the assigned area.

Operations

  • Ensure that the daily production goals for throughput, quality, target date and cost are being supported by his or her team.
  • Ensure that a safe job execution has priority over a quick job execution.
  • Ensure maximum uptime performance of all production centers in the assigned area of accountability through efficient use of available resources and according to production planning priorities.
  • Maintain awareness of all equipment issues in your assigned area. Develop plans and repair this equipment with a high sense of urgency.
  • Participate in and conduct Safety and Production Meetings.
  • Ensure communication across shifts occurs regarding equipment concerns, overtime, manning, status of work assignments or any other item that may impact production.
  • Communicate and work closely with your Superintendent as well as Production regarding the status of equipment issues.
  • Ensure deviations from the standard process are effectively communicated to the relevant people/functions.
  • Conduct layered process audits (LPAs) to improve quality, reduce scrap and rework and reduced internal and external customer rejections.
  • Ensure all preventive maintenance (PMs), work orders and other assigned tasks delegated, documented and completed on time.
  • Drive consistent PED Steps for all outage, rebuild and repair events.
  • Engage with his/her team to develop and implement standard work.
  • Engage his/her team to drive a continuous improvement culture to eliminate waste, overburden and variability in manufacturing processes.
  • Participate in productivity, safety and quality improvement projects through process adherence and the use of RCFA methodology.
  • Support developing solutions for cost reduction and yield improvement.
  • Implement the Reliability Roadmap objectives in your assigned area.

Management and Leadership

  • Inspire employees to perform at high levels.
  • Set and communicate clear performance standards and hold direct reports accountable for results.
  • Conduct performance appraisals and maintain performance metrics to monitor employee results; identify and initiate improvements for development and/or training.
  • Provide on-going coaching, feedback, and development to increase employee performance and production.
  • Communicate effectively with direct reports and resolve conflicts within and between individual team members.
  • Ensure employees are paid accurately and held accountable for time missed by tracking attendance and entering data in the timekeeping system.
  • Ensure all vacancies are filled by managing and scheduling employees for overtime as needed.
  • Adhere to all applicable rules in the Labor Agreement.

Required Qualifications

High school diploma / GED required.

At least 5+ years related work experience with leadership responsibility.

Is technically competent and capable of backfilling team members.

Has the ability to understand the manufacturing process and technical knowledge to ensure product quality and flow.

Has the ability to understand how activities impact cash conversion, EBITDA and other key financial metrics.

Ability to read and interpret documents such as safety policies and procedures, HR policies, standard work documents, maintenance instructions, procedure manuals, charts etc.

  • Ability to rotate shifts in a 24/7 operation.

Preferred

Vocational technical degree or completion of an apprentice program.

  • Industrial electrical and mechanical experience.

EEO Statement

Commonwealth Rolled Products is an equal opportunity employer. Qualified applications will receive consideration for employment without regard to their race, religion, color, sex, pregnancy or pregnancy-related conditions, sexual orientation, gender identity or expression, age (forty and over), national origin, disability (as defined by applicable law), veteran’s status, genetic information, marital status, height, weight or any other status or characteristic protected by applicable law. Our HR team will reach out to the applicants who met the qualifications and most closely aligned with requirements of the positions.

Education
Required

High School or better.

Experience
Required

5 years: Related work experience with leadership responsibility

Equal Opportunity Employer
This employer is required to notify all applicants of their rights pursuant to federal employment laws.For further information, please review the Know Your Rights notice from the Department of Labor.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Maintenance Supervisor - ABS (Day Shift)
Maintenance Supervisor - ABS (Day Shift)

Commonwealth Rolled Products, Inc. • Lewisport (KY)

On-site
USD 65,000 - 95,000
Maintenance Supervisor - ABS (Day Shift)
Maintenance Supervisor - ABS (Day Shift)

Aleris • Lewisport (KY)

On-site
USD 70,000 - 90,000
Maintenance & Safety Lead – 24/7 Plant Reliability
Maintenance & Safety Lead – 24/7 Plant Reliability

External Commonwealth Rolled Products • Lewisport (KY)

On-site
USD 85,000 - 110,000
Industrial Maintenance Supervisor, Third Shift: Monday through Thursday 4:30 PM to 3:00 AM
Industrial Maintenance Supervisor, Third Shift: Monday through Thursday 4:30 PM to 3:00 AM

Bigelow Tea • Louisville (KY)

On-site
USD 70,000 - 90,000
Area Maintenance Supervisor
Area Maintenance Supervisor

Reynolds Consumer Products • Louisville (KY)

On-site
USD 86,000 - 121,000
Maintenance Supervisor (Utilities)
Maintenance Supervisor (Utilities)

Maker’s Pride, LLC • Ohio

On-site
USD 70,000 - 100,000
Area Maintenance Supervisor
Area Maintenance Supervisor

Reynolds Consumer Products • Parkland (KY)

On-site
USD 86,000 - 121,000
Maintenance Supervisor 2nd Shift
Maintenance Supervisor 2nd Shift

Adecco Permanent Recruitment • Hopkinsville (KY)

On-site
USD 75,000 - 95,000
Maintenance Supervisor
Maintenance Supervisor

Reynolds Consumer Products • Louisville (KY)

On-site
USD 65,000 - 90,000
Maintenance Supervisor (Utilities)
Maintenance Supervisor (Utilities)

Maker’s Pride, LLC • McComb (OH)

On-site
USD 65,000 - 90,000