Maintenance Mechanic-Junior

AEP; West Virginia; On-site; USD 45,000 - 48,000; Full time

Benefits offered by this job

Comprehensive benefits package

Job summary

American Electric Power (AEP) is seeking a Junior Maintenance Mechanic at Cresap, WV. You will inspect, repair and maintain plant equipment and structures, with a travel requirement of about 60% to locations such as Rockport, Dresden and New Haven.

The role includes welding, rigging, mechanical assembly and electrical tasks. Candidates should have an engineering-related associate degree or equivalent experience, the ability to read prints, and a willingness to work at heights and in varied

Qualifications

• Requires knowledge of plant maintenance, materials, tools and rigging.
• Ability to read simple prints and specifications.
• Willingness to travel up to 60% from home base to multiple sites.

Responsibilities

• Inspect, erect or remove scaffolding and assist in rigging.
• Use tools to drill, tap, cut, thread, mill and prep boiler tubes.
• Perform non-code welding and brazing for wear plates and fixtures.
• Perform electrical work on lighting and circuits up to 260V.
• Inspect and repair plant equipment including pumps, fans and motors.
• Maintain clean and orderly work areas and comply with safety rules.

Skills

Mechanical aptitude

Manual dexterity

Read prints/specifications

Climb ladders

Education

Associate degree in engineering/industrial/energy tech

Associate degree + 2 years related work

High school diploma + 4 years related work

High school diploma + 2 years military experience

Tools

Scaffolding & rigging

Machine shop tools

Welding equipment

Electrical testing tools

Job description

Maintenance Mechanic-Junior page is loaded## Maintenance Mechanic-Juniorlocations: Cresap, WVtime type: Full timeposted on: Posted Todaytime left to apply: End Date: October 15, 2026 (9 days left to apply)job requisition id: R17220**Job Posting End Date**10-15-2026Please note the job posting will close on the day before the posting end date**Job Summary**Perform work in the checking, inspecting, repair, maintenance, installation and construction of plant equipment and structures.**Job Description****This job REQUIRES travel from Homebase location 60% of the time.**Locations of travel to include:Rockport, IndianaDresden, OhioNew Haven WVCharleston WVKenova WVLouisa KYBenton Harbor, Michigan**What you'll do:****Essential Job Functions & Tasks*** Inspect, erect and/or remove simple scaffolding, rigging and blocking and assist in the erection or removal of extensive or complicated scaffolding, rigging and blocking.* Use appropriate tools and perform jobs such as drill and tap holes, thread bolts, cut and thread pipe, mill and prep boiler tubes, use measuring devices required in the work, and learn to perform simple machining jobs on machine shop tools. Use layout tools such as rules, scales, straight edges, dividers, trams, squares, levels, plumb bobs and protractors to lay out plane figures on flat surfaces, such as coal conveyor wear plates, bolt holes on man covers, and flanges and holes for conduit in junction boxes.* Perform non-code electric arc welding such as building up work surfaces on wear plates where warping is not a problem, and where adequate stock remains to prevent burning through; make tack and assembly welds in the maintenance and construction of items such as jigs, fixtures, chutes, hoppers, wear plates, and cable troughs where such welds are not required to be continuous structural welds.* Perform metal cutting (oxyacetylene, propylene, etc.) and simple welding and brazing in the flat position. Use oxyacetylene torches, LP gas torches, and the like, for purposes of assembly or disassembly, bending, forming, or heat-treating when the configuration of the object is such that intricate control of heat application is not required, such as in the removal of couplings from service water plumps, sump pumps and bending U-straps from carbon steel.* Perform electrical work such as pull in and terminate 2- and 3-wire conductors for lighting or fractional horsepower circuits and make repairs to same; tape electrical connections on circuits up to and including 260 volt, AC and DC on fractional horsepower equipment; use clamp-on ammeters and voltmeters; clean de-energized electrical equipment.* Install and make repairs to masonry refractory and insulation.* Replace and adjust valve packing, drive balls, conveyor idlers, gauges glasses, sight glasses, position/level switches, pressure gauges, manometers, pressure switches and similar devices.* Inspect, clean, repair and reassemble as assigned: oil igniters and nozzles, pulverizers, feeders, fans, dampers, air preheaters, heat exchangers, precipitator rappers, hopper heaters & insulators, small motors, pumps, fans, slag blowers, etc.* Clean and mask surfaces preparatory to painting; perform paintings using brushes or spray equipment with approved paints. Perform rough carpentry work, make minor repairs to brick or concrete walls and floors, perform rough plastering, replace glass and repair window and door hardware.* Operate mobile equipment and its associated equipment and perform duties incidental to the operation of such equipment. Maintain equipment, tools and work areas in a clean and orderly condition. Obtain clearance orders and determine that the equipment to be worked on has been properly cleared and tagged. Report irregularities and abnormal conditions to supervision.* Perform duties in accordance with the Company safety rules, operating regulations and practices. Train for and carry out assignments in firefighting, first aid or other emergency programs as required.* Perform similar or less skilled work as assigned.**What we're looking for:**Education requirements are listed below:* Associate degree in engineering, industrial or energy technology; OR Associate degree in another discipline and two (2) years of related work experience; OR high school diploma with four (4) years of related work experience; OR high school diploma with two (2) years of related military experience. Related experience is listed under Principal Accountabilities. Must also have performed the duties of, and have maintained all the qualifications of the line-of-progression. Starting with EO Jr., Maintenance-line-of-progression and must be able to pass an examination, as required. Normally achieved with 1040 hours as an Equipment Operator-Jr or equivalent.Work Experience requirement listed below:* Must be familiar with plant maintenance, materials, practices, tools and rigging, scaffolding and blocking involved in the work.* Must have demonstrated the ability to physically and mentally perform work in all areas and heights required.* Must be familiar with the layout, construction, and functions of the equipment and apparatus in the plant and about the plant property.* Must be familiar with equipment clearance procedures, rules, safety practices and procedures applicable to the work.* Must be able to read, interpret, and work from simple prints and specifications. Must be able to learn to instruct and direct other employees.Required License(s)/Certification(s) are listed below:* Must obtain and maintain all necessary certifications and licenses as required.* Must possess the appropriate State driver license.* As part of the selection process, candidates are required to complete an online pre-employment assessment and achieve a \"recommended\" result. Additional information and preparation resources can be found in the Employment Test Prep section of our website: .**Other preferences:*** Physical demand level is Medium* Must be able to climb ladders & stairs a number of times each day.* Must be able to use fine dexterity to move switches & controls to precise locations* Must be able to detect color on alarms, equipment & other devices* Must be able to hear announcements on the Plant PA system, and to hear abnormal sounds of plant equipment* Must be able to communicate plant information by phone, in person or by radio* Must be able to work on heights, grating, platforms and catwalks.* Must be able to exert up to 50 lbs of pressure to manually turn off valves. Must be able to stand or walk continuously for up to 12 hours.In addition to a competitive compensation, AEP offers a unique comprehensive benefits package that aims to support and enhance the overall well-being of our employees.At AEP, we're more than just an energy company - we're a team of dedicated professionals committed to delivering safe, reliable, and innovative energy solutions. Guided by our mission to put the customer first, we strive to exceed expectations by listening, responding, and continuously improving the way we serve our communities. If you're passionate about making a meaningful impact and being part of a forward-thinking organization, this is the company for you!**Compensation Data****Compensation Grade:**U037-460**Compensation Range:**$33.34 - $34.86The Physical Demand Level for this job is: M - Medium Work: Exerting 20 to 50 pounds of force occasionally, and/or 10 to 25 pounds of force frequently, and/or greater than negligible up to 10 pounds of force constantly to move objects. Physical demand requirements are in excess of those for Light Work.**Hear about it first!** Get job alerts by email. Log in to your Candidate Home Account today! If you don't have an account, you can create one.It is hereby reaffirmed that it is the policy of American Electric Power (AEP) to provide Equal Employment Opportunity in all respects