Maintenance I&E Technician

Odfjell

North Charleston (SC)

On-site

USD 55,000 - 82,000

Full time

5 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

ODFJELL TERMINALS US is seeking a Maintenance I&E Technician in North Charleston, SC. The role covers preventative maintenance, repairs, and troubleshooting of electrical, instrumentation, and control systems on terminal equipment, with safety and environmental compliance at the forefront.

The ideal candidate has 5+ years of industrial electrical/instrumentation experience, NFPA 70e certification, and may hold NCCER Electrical/Instrumentation credentials or a journeyman license.

Qualifications

  • NFPA 70e certification.
  • 5+ years of experience repairing industrial electrical/instrumentation/controls.
  • Preferred NCCER Electrical or Instrumentation certification, Electrical Maintenance or Journeyman License, or a 2–4 year technical degree.

Responsibilities

  • Follow safety, environmental, regulatory, and departmental procedures.
  • Coordinate PMs, repairs and troubleshooting on electrical, instrumentation, and controls for terminal equipment.
  • Coordinate and oversee inspections and contractor work on I&E equipment.
  • Coordinate and lead third-party inspectors and approved contractors on repairs.
  • Review and close work orders; communicate deficiencies to management.
  • Support change of service tasks and management of change processes.
  • Maintain knowledge of safety and environmental requirements to meet company standards.
  • Operate and coordinate with CMMS for work orders.

Skills

Electrical maintenance
Industrial equipment repairs
Troubleshooting
Safety procedures
Team coordination

Education

NCCER Electrical or Instrumentation certification
Electrical Maintenance or Journeyman License
Two/Four-year technical degree
High School Diploma

Tools

SAP
CMMS
Forklift operation
JLG operation

Job description

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Maintenance I&E Technician

OTC Maintenance Full Time North Charleston, SC, US 1 Attachments

ODFJELL JOB DESCRIPTION

COMPANY: ODFJELL TERMINALS US

JOB LOCATION: OTC (TERMINAL)

JOB TITLE: I&E TECHNICIAN

DEPARTMENT: MAINTENANCE

REPORTS TO: TERMINAL MANAGER

EXEMPT/NON-EXEMPT: NON-EXEMPT

MANAGERIAL (Y/N): NO DIRECT REPORTS : None # Total: 0

BUDGET AUTHORITY: N/A

OVERALL RESPONSIBILITIES

Perform Preventative/Predictive Maintenance (PM), full repairs, and troubleshooting on terminal equipment in order to maintain the facility at peak operating efficiency on a 24-hour basis, consistent with company and government standards of safety, environmental, and quality control.

ESSENTIAL FUNCTIONS

  • Follow safety, environmental, regulatory, and departmental procedures and policies.
  • Coordinate and perform PMs, repairs and troubleshooting on electrical, instrumentation, and controls for the Terminal equipment with Loading/unloading and storage systems.
  • Coordinate and perform repairs and troubleshooting of Firewater, Marine Vapor Controls, Heat Tracing (electrical and steam), PLC, and HMI systems.
  • Coordinate vendors for repairs and troubleshooting of all I&E equipment. Troubleshoot with vendors can be either in person or over the phone.
  • Coordinate and oversee third party inspectors and approved contractors on the repairs and inspections of terminal equipment (i.e. Heat Tracing, Cathodic Protection, High Voltage, Compressors, Flares, etc)
  • Coordinate cleanup of job site, ensure equipment, tools, and materials are returned to proper place.
  • Complete and process assigned work orders at the completion of each task and review deficiencies with management or engineering.
  • Perform change of service (COS) tasks on equipment, participate in management of change process, and develop change of equipment reports.
  • Thorough knowledge of safety and environmental requirements in order to complete jobs per company/department expectation.
  • Preferred knowledge of advanced instrumentation equipment: SAAB, Guided wave radar levels, magnetic levels, O2 analyzers, and BTU analyzers.
  • Preferred knowledge of the following equipment: Heater & Chiller systems, air compressors, rail or truck loadcell systems, and wastewater systems.

OTHER FUNCTIONS

  • Lead Safety Discussion, Job Walkouts, and PSSRs with other departments
  • Oversee JSA documentation on all I&E Jobs.
  • Fill out Permits for assigned Jobs. Review Permits for understanding, agreement, and signing, including LOTO.
  • Coordinate materials for inventory, repairs, shipping and receiving, and vendor use.
  • Provide Leadership in Safety and Repairs for all I&E maintenance activities
  • CMMS system interaction: provide WO updates and enter WO updates into system
  • Oversite of I&E contractors for repairs and troubleshooting of Terminal equipment
  • Provide oversight coverage for mechanical contractors for vacation coverage
  • Support Operational activities as required including but not limited to:
    • support control room monitoring modalities operations through UCOS system.
    • Support operations during commissioning and decommissioning process when tanks must be released for API or new products (control room functions)
  • Tracking and monitoring safety critical systems (e.g. VCU, Seal Pots – Alarms)
  • Participate in the ERT team, after 90+ days of employment and once fully trained for the team.
  • Perform other job-related duties as assigned.

MINIMUM QUALIFICATIONS

  • High School Diploma or equivalent
  • NFPA 70e certification
  • Must have over five (5+) years of work experience in industrial equipment repairs on electrical, instrumentation, or controls equipment.
  • Preferred degree or license of the following: NCCER Electrical or Instrumentation certification, Electrical Maintenance or Journeyman License, OR two or four-year technical degree from an accredited institution

PHYSICAL/MENTAL REQUIREMENTS

Occasionally: sitting; ability to board vessels; crawling; crouching; fine manipulation; using math/calculations

Frequently: standing; walking (general); walking in or out of terminal, through turnstile, be able to evacuate terminal in emergency; ability to climb to top of tanks; bending over; climbing; reaching overhead; kneeling; balancing; pushing or pulling; grasping; repetitive use of hands/arms; repetitive use of legs; lifting or carrying 26- 50 lbs.; eye/hand coordination; talking; touching; keyboarding/typing; thinking analytically; understanding, assimilating and drawing conclusions from information and data; producing unique or creative solutions to problems; receiving and transmitting information accurately using oral communications; receiving and transmitting information accurately using written communications; remembering details; making decisions; adjusting to changes; examining/observing details; discriminating colors

Continuously: hearing; smelling; seeing; maintaining stamina during workday; concentrating on tasks; maintain attention span during workday; using English language correctly.

WORKING CONDITIONS

Occasionally: heavy machinery; vibration

Frequently: working a 5/8, M-F schedule; irregular hours; on call schedule at least every other weekend; respirator fit; hot/cold temperatures; work outside; electrical hazards; falling hazards/wear safety harness; sharp objects/tools; working at heights; working in confined spaces; exposure to fumes, gases, odors; exposure to dirt, dust, grease. Oil, mud; excessive noise exposure; hot temperature devices (burners, flame torches, etc.)/ performing multiple tasks at the same time; working in difficult interpersonal situations

Continuously: close proximity and potential exposure to hazardous chemicals; wearing PPE; maintain TWIC card; wearing uniform (FRC); maintaining composure and professionalism under emotional stress; maintaining high level of energy and productivity through the workday or shift

TOOLS AND EQUIPMENT UTILIZED

  • Hand tools
  • Power tools
  • Electrical Testing Equipment
  • Instrumentation Testing Equipment
  • Personal safety equipment
  • Forklift and JLG operation
  • Desktop PC (programs such as SAP, CMMS will be used)
Attachments (1)

005 - OTC Maintenance - I&E Technician.docx

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

I&E Maintenance Technician - 24/7 Terminal Ops
I&E Maintenance Technician - 24/7 Terminal Ops

Odfjell • North Charleston (SC)

On-site
USD 55,000 - 82,000
I E Technician
I E Technician

CVR Energy, Inc. • East Dubuque (IL)

On-site
USD 42,760 - 79,267
Competitive wages based on experience
Paid Time Off
401K with Company Contributions
+2
I&E Technician
I&E Technician

Energy Transfer Family of Partnerships • Pennsylvania

On-site
USD 65,000 - 90,000
Maintenance E/I Technician
Maintenance E/I Technician

Resonac Graphite America, Inc. • Ridgeville (SC)

On-site
USD 65,000 - 90,000
I&E Technician
I&E Technician

Primary Services • Houston (TX)

On-site
USD 75,000 - 95,000
Electrical and Instrumentation Technician
Electrical and Instrumentation Technician

BLEACHTECH LLC • Petersburg (VA)

On-site
USD 35,000 - 42,000
Maintenance Technician
Maintenance Technician

Enstructure LLC • Wilmington (DE)

On-site
USD 52,000 - 76,000
I&E Technician
I&E Technician

INEOS Acetyls • Texas City (TX)

On-site
USD 65,000 - 90,000
Maintenance Technician
Maintenance Technician

JCI Jones Chemicals • Seattle (WA)

On-site
USD 50,000 - 75,000
I&E Technician
I&E Technician

Energy Transfer • Odessa (TX)

On-site
USD 65,000 - 90,000