Machinist - Night Shift

Precision Castparts Corp.

Santa Clarita (CA)

On-site

USD 34,000 - 52,000

Full time

15 hours ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Precision Castparts Corp. in Santa Clarita is seeking Level three Machinists to operate 3-5 axis CNCs and conventional mills/lathes for aerospace parts.

The role requires advanced blueprint and GD&T reading, complex setups, and the ability to edit/write simple programs. You will troubleshoot issues and support safe machine recovery, with night shift duties beginning at 6:00pm and a minimum 90-day day-shift training.

Qualifications

  • Requires experienced machinist with 4-6 years in aerospace machining.
  • Reads and applies GD&T from engineering drawings.
  • Performs complex setups on 3- and 5-axis CNCs and conventional mills/lathes.

Responsibilities

  • Operate multiple machine platforms including CNC and conventional mills and lathes.
  • Perform complex setups on 3- and 5-axis machines.
  • Validate first part runs and adjust programs as needed.
  • Edit and write simple programs for tooling.
  • Troubleshoot machining issues and support safe machine recovery.
  • Support 6S standards and audits.

Skills

CNC machining (3-5 axis)
GD&T reading
Blueprint interpretation
First article runs
Program editing (simple)
Fixture alignment
Machine recovery
Experience 4-6 years
Cross training flexibility
6S awareness
Heavy lifting up to 35 lbs

Job description

Night shift begins at 6:00pm

Training on day shift required for a minimum of 90 days.

Position Summary

Machinists operate 3-5 axis CNC machines and conventional mills and lathes to produce complex aerospace parts. These individuals demonstrate advanced cross training flexibility including first part run and full machine recovery. Level three machinists are experienced machinists capable of completing complex setups on 3-5 axis machines. They are also able to apply advanced blueprint and GD&T reading to complex production inspection processes. Level three machinists are also responsible for editing programs and writing simple programs to make tooling. These individuals are also expected to troubleshoot issues that arise for complex parts. This position typically requires 4-6 years of machinist experience.

Gantry Experience Highly Desirable

Night shift begins at 6:00pm

Training on day shift required for a minimum of 90 days.

Position Summary

Machinists operate 3-5 axis CNC machines and conventional mills and lathes to produce complex aerospace parts. These individuals demonstrate advanced cross training flexibility including first part run and full machine recovery. Level three machinists are experienced machinists capable of completing complex setups on 3-5 axis machines. They are also able to apply advanced blueprint and GD&T reading to complex production inspection processes. Level three machinists are also responsible for editing programs and writing simple programs to make tooling. These individuals are also expected to troubleshoot issues that arise for complex parts. This position typically requires 4–6 years of machining experience.

Machinist independently sets up, operates, and troubleshoots complex 3- and 5-axis CNC equipment and applicable conventional mills and lathes to manufacture aerospace components in accordance with engineering drawings, work instructions, and quality requirements. This position performs complex setups, first-article runs, program validation and editing, and advanced dimensional inspection using blueprint interpretation and geometric dimensioning and tolerancing (GD&T). Level 3 Machinists demonstrate flexibility across machine platforms, develop tooling and simple manual programs as needed, and support safe machine recovery. This position typically requires 4–6 years of machining experience.

Primary Duties & Responsibilities
  • Levels one, two, three and four responsibilities apply with the following additional duties:
  • Fully operate multiple machine platforms as needed, including CNC and conventional Mills and Lathes.
  • Perform complex setups without assistance on a number of machine platforms, including 3 and 5 axis machines.
  • Perform complex inspection tasks to validate and respond to dimensional requirements and specifications utilizing advanced GD&T and print reading abilities.
  • Validate programs and first part runs on newly developed products.
  • Assist in accurate and safe full machine recovery.
  • Assist in additional tasks as assigned by Management and Supervision.
  • Perform all applicable machining responsibilities while maintaining safety, quality, and production requirements.
  • Independently perform complex machine setups, including aligning multiple fixtures on multiple spindles and setting up horizontal machines using the center line of rotation.
  • Operate multiple CNC machine platforms, including 3- and 5-axis equipment, and applicable conventional mills and lathes.
  • Create tooling and develop simple manual programs from engineered drawings for approved production needs.
  • Perform first-article runs, validate programs, and conduct NC tape proofing in accordance with established procedures and authorization.
  • Perform close-tolerance boring and balance dimensional tolerances when machining multiple parts.
  • Interpret engineering drawings, including 3D isometric drawings, and applying GD&T to inspection and machining decisions.
  • Perform complex in-process inspections and document results in accordance with applicable specifications and quality procedures.
  • Identify and troubleshoot complex machining, tooling, and dimensional issues; assist with safe machine recovery and elevate concerns when required.
  • Support 6S standards and demonstrate the competencies needed to perform 6S audits when assigned.
Required Skills
  • Advanced competencies in machine platform operation in order to demonstrate cross training flexibility, which includes operating conventional machines at a basic level.
  • Advanced ability in job setup and verification.
  • Advanced knowledge of GD&T and inspection processes.
  • Machining trouble shooting skills applied to first part runs and machine recovery.
  • Intermediate understanding of CNC programing, editing and simple tooling creation.
  • Basic CAD/CAM exposure
  • Position requires the ability to lift up to 35 lbs.
  • Advanced proficiency in complex CNC setups, job verification, fixture alignment, and multi-platform machine operation.
  • Ability to interpret detailed blueprints, 3D isometric drawings, GD&T, and customer dimensional requirements.
  • Intermediate knowledge of CNC program editing and simple manual programming; ability to create tooling for approved applications.
  • Ability to perform first-article runs, NC tape proofing, and complex precision inspection.
  • Demonstrated machining troubleshooting skills and knowledge of safe machine recovery procedures.
  • Basic exposure to CAD/CAM software.
  • Ability to lift up to 35 lbs.
Required Experience
  • Typically, this position requires evidence of success in level two machining duties for at least one year prior to promotion or hire.
  • 4-6 years of experience
  • 4 to 6 years of Machining experience with an aerospace manufacturing facility
  • Demonstrated proficiency performing machining responsibilities, including CNC machine operation, basic machine setups, fixture installation and alignment, cutting tool preparation, CNC program loading, offset adjustments, and in-process inspections.
  • Minimum of one year of demonstrated successful performance of Level 2 machining responsibilities prior to promotion or hire, or equivalent experience demonstrating the required technical competencies.
  • Experience independently performing complex machine setups on 3-axis and 5-axis CNC machines, including setup verification, tooling adjustments, and preparation for production.
  • Demonstrated experience interpreting engineering drawings, applying Geometric Dimensioning and Tolerancing (GD&T), and utilizing precision measuring equipment to verify dimensional requirements and product conformity.
  • Experience troubleshooting machining processes, identifying tooling or dimensional issues, and supporting first-part runs, program validation, and machine recovery.
  • Working experience with CNC program editing, basic programming for tooling applications, and operating multiple machine platforms.
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Machinist - Weekend Shift
Machinist - Weekend Shift

Precision Castparts Corp. • Santa Clarita (CA)

On-site
USD 70,000 - 95,000
Machinist - Weekend Shift
Machinist - Weekend Shift

Precision Castpart • California

On-site
USD 65,000 - 90,000
Machinist 2
Machinist 2

Burke Porter, an Ascential Technologies Brand • Three Rivers (MI)

On-site
USD 30,000 - 47,000
CNC Machinist 3rd Shift
CNC Machinist 3rd Shift

Gleason Corporation • City of Rochester (NY)

On-site
USD 30,000 - 48,000
Machinist II
Machinist II

Curbell Plastics, Inc. • Portland (OR)

On-site
USD 52,000 - 75,000
Machinist 3, 4 or 5 Axis - 2nd shift
Machinist 3, 4 or 5 Axis - 2nd shift

ALIGN PRECISION - ANAHEIM, INC. • Walnut (CA)

On-site
USD 70,000 - 100,000
MACHINIST II
MACHINIST II

General Equipment • Owatonna (MN)

On-site
USD 55,000 - 75,000
Machinist IV
Machinist IV

Amtec - Enterprise 5 • California

On-site
USD 42,000 - 79,000
CNC Machinist
CNC Machinist

laborup • Chandler (AZ)

On-site
USD 54,000 - 75,000
Modern Equipment
5-Axis Training
Optional Overtime
CNC Machinist 1st Shift
CNC Machinist 1st Shift

Gleason Corporation • City of Rochester (NY)

On-site
USD 30,000 - 48,000