Machinist II - Large Case/HMC3 - 2nd Shift

CIRCOR International, Inc.; Monroe (NC); On-site; USD 48,000 - 66,000; Full time

Job summary

CIRCOR International, Inc. in Monroe, NC is seeking a skilled machinist to set up and operate a range of machining processes, ensuring high-quality parts for hydro testing.

You will read blueprints, verify dimensions with precision tools, and prepare pieces for testing while maintaining safe, efficient workflow. The role emphasizes attention to tooling wear, proper fixture setup, and strict quality control to prevent defects during hydrostatic testing and final assembly.

Qualifications

• 10 years machining experience OR 3-4 years HMC experience preferred.
• High school diploma, GED or equivalent certificate required.
• Minimum of three years prior machining experience.

Responsibilities

• Deburring and cleaning parts in preparation for Hydro test.
• Set up and operate milling, drilling, reaming and turning operations from instructions or blueprints.
• Inspect parts and chart dimensions to ensure accuracy amid tool wear or deflection.
• Select and set holding devices; clamp parts to prevent damage during machining.
• Use precision measuring instruments to maintain specified tolerances.
• Load/unload parts and operate hydro test stands; report leaks and anomalies.

Skills

Machining

HMC experience

Precision measurement

Blueprint reading

Education

High school diploma

Tools

Dividing head

Boring heads

Parallels

Jacks

Vee blocks

Hand tools

Job description

Position Summary

• Deburring and cleaning parts in preparation for Hydro test.
• Make necessary inspection checks and chart dimensions as required, to ensure accuracy of part due to tool wear or deflection.
• Select and set proper holding devices, fixtures, and necessary attachments; layout as required. Position part or parts to be machined on machine table using lifting equipment as required; clamp in position for machining so as to avoid springing or damage to finished surfaces.
• Adjust and set cutting tools in tool changers or heads, grind single point cutting tools as required; select proper speeds and feeds; select and set attachments such as dividing heads and rotary index table as required.
• During automatic cycle time operator is to perform miscellaneous operations such as preparing next piece for machine, simple deburring and hydro test operations, or the operation of supplemental machines.
• Utilize CBS visual management board for scheduling and reporting. The use of computer software and hardware is required.
• Use precision measuring instruments such as verniers, micrometers, dial indicators, templates, feelers, gages of all types, scale, calipers, and electronic measuring equipment to maintain dimensions and tolerance as required.
• Set up and hydrostatic test parts using test presses and/or fixtures as required. Apply required pressure by use of hand, pump or valve; use pressure gages to determine and maintain proper pressure; observe for leaks and report to supervisor for dispositions; stamp as required; apply sealing solution and treat as directed.
• Remove surplus metal, sand, cores, bead splatters, rust, scale, burrs, high spots, ragged edges and foreign matter from unfinished or finished parts. Load and unload production washing machinery. Preserve with rust preventative as required.
• Keep working area, machines and equipment in a clean, orderly condition. Safeguard working area as necessary. Wear all safety equipment that is necessary on the job.
• The ability to use all machining equipment, hydro and pump test stands. Tools include all basic cutting tools, dividing head, boring heads, parallels, jacks, vee blocks, hand tools, and other necessary equipment. Hoist operated cranes and other lifting equipment. Torque wrenches, hand and power grinders, files and sanding disc. etc.
• Work from verbal or written instructions, with or without job tag instructions; read and work from blueprints, charts sketches, process specifications and masters. Perform all duties without assistance, except on unusual or difficult jobs. Consistently produce work of proper quality and of proper required quantity.

Position Summary

Set up and operate by tape, manuscript or manual computer control, a variety of work involving operations such as milling, facing, drilling, reaming, boring, tapping, slotting, grinding, turning and other operations.

Principal Activities

• Deburring and cleaning parts in preparation for Hydro test.
• Make necessary inspection checks and chart dimensions as required, to ensure accuracy of part due to tool wear or deflection.
• Select and set proper holding devices, fixtures, and necessary attachments; layout as required. Position part or parts to be machined on machine table using lifting equipment as required; clamp in position for machining so as to avoid springing or damage to finished surfaces.
• Adjust and set cutting tools in tool changers or heads, grind single point cutting tools as required; select proper speeds and feeds; select and set attachments such as dividing heads and rotary index table as required.
• During automatic cycle time operator is to perform miscellaneous operations such as preparing next piece for machine, simple deburring and hydro test operations, or the operation of supplemental machines.
• Utilize CBS visual management board for scheduling and reporting. The use of computer software and hardware is required.
• Use precision measuring instruments such as verniers, micrometers, dial indicators, templates, feelers, gages of all types, scale, calipers, and electronic measuring equipment to maintain dimensions and tolerance as required.
• Set up and hydrostatic test parts using test presses and/or fixtures as required. Apply required pressure by use of hand, pump or valve; use pressure gages to determine and maintain proper pressure; observe for leaks and report to supervisor for dispositions; stamp as required; apply sealing solution and treat as directed.
• Remove surplus metal, sand, cores, bead splatters, rust, scale, burrs, high spots, ragged edges and foreign matter from unfinished or finished parts. Load and unload production washing machinery. Preserve with rust preventative as required.
• Keep working area, machines and equipment in a clean, orderly condition. Safeguard working area as necessary. Wear all safety equipment that is necessary on the job.
• The ability to use all machining equipment, hydro and pump test stands. Tools include all basic cutting tools, dividing head, boring heads, parallels, jacks, vee blocks, hand tools, and other necessary equipment. Hoist operated cranes and other lifting equipment. Torque wrenches, hand and power grinders, files and sanding disc. etc.
• Work from verbal or written instructions, with or without job tag instructions; read and work from blueprints, charts sketches, process specifications and masters. Perform all duties without assistance, except on unusual or difficult jobs. Consistently produce work of proper quality and of proper required quantity.

Candidate Requirements

Knowledge Skills & Abilities

• Use of advanced trades mathematics, together with the use of complicated drawings, specifications, charts, tables, handbook formulas; all varieties of precision measuring instruments.
• To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Operator must wear personal safety equipment.
• 10 years machining experience OR 3-4 years HMC experience preferred

Education & Experience

• High school diploma, GED or equivalent certificate required.
• Minimum of three years prior machining experience.

CIRCOR is an EEO Employer of Females / Minorities / Veterans / Individuals with Disabilities