Machinist - 2nd Shift

regalrexnord

Union Grove (WI)

On-site

USD 30,000 - 34,000

Full time

14 days+

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Regal Rexnord Corporation is seeking an onsite Machining Operator to set up, adjust, and operate a range of machining equipment to produce high-precision parts. You will train newer employees and ensure parts meet strict specifications and inspections.

You will work in a fast-paced manufacturing environment, reading blueprints and route sheets, following verbal and written instructions, and maintaining equipment and work areas to 5S standards.

Qualifications

  • Prefer some short-term trades training and minimum one year prior machining experience.
  • Must be capable of learning to run PC accurately.
  • Ability to perform to verbal instructions as well as read/write English and interpret documents including specifications, route sheets, blueprints, charts, test information, bills of material.
  • Ability to plan and perform a sequence of operations and make decisions on quality, tolerances, operation, and setup.
  • Ability to use power and hand tools, gauges, testing devices and small machines to assemble components to specifications.
  • Thorough knowledge of machining

Responsibilities

  • Provide instruction/training to other employees to develop skills and production parts to specifications.
  • Set-up, adjust, and operate a wide variety of machining equipment and parts to close tolerance.
  • Load/unload parts, cycle machine, and run production runs.
  • Maintain a clean and safe work area following 5S standards.
  • Detect and report malfunctions, collaborate with engineering and manufacturing to improve processes.

Skills

Machining experience
Blueprint reading
English comprehension

Education

Trades training

Tools

Machining equipment
Measuring tools

Job description

Work Model: This is a fully onsite role, with work performed at your designated Regal Rexnord office.

____________________

Regal Rexnord Corporation ("Regal Rexnord") is a leading manufacturer of electric motors, electrical motion controls, power generation and mechanical power transmission products and sub-systems, serving customers around the world in the general industrial, consumer, commercial construction, food & beverage, and alternative energy end markets, among others. Regal Rexnord sells its products and solutions to OEMs, through distributors, and directly to end-users. With the announcement of the acquisition of Altra Industrial Motion, a ~$2B global business with 9,000 associates, focused on Power Transmission and Factory Automation products, Regal Rexnord will become a $7.3B company with 36,000 associates globally.

You may not know it, but Regal Rexnord impacts your life every day. The company's products enable the fans in HVAC systems that keep us comfortable; the power source that keeps smart buildings running; the agricultural and food service equipment that keeps us fed; and the conveyer systems that keep e-commerce flowing, to name a few of the applications where our products are used.

Regal Rexnord's business purpose is to create a better tomorrow by energy‑efficiently converting power into motion. This means creating innovative solutions while focusing on both customer needs and the company's commitment to sustainability. The company's industrial powertrain and automation solutions offerings are an important part of the company's growth strategy. The company's strategy includes leveraging 80/20 to prioritize all activities, including product excellence, operational excellence and commercial excellence (i) driving organic sales growth through the introduction of innovative new products, with a particular focus on improving energy efficiency, (ii) establishing and maintaining new customers, as well as developing new opportunities with existing customers, (iii) participating in higher growth end markets and geographies, and (iv) identifying and consummating strategic, value creating acquisitions.

Key Responsibilities
  • Perform diversified semi-skilled machining operations (including setup, adjust and operate wide variety of machining equipment) to generate a vast array of close tolerance parts, held to strict inspection requirements adhering to print specifications. Read and interpret fairly complicated drawings, charts, instructions, and diagrams.
Essential Responsibilities
  • Provide instruction/training to other employees (new employees, as well as experienced employees) to develop skills and to produce production parts to specifications.
  • Set-up, adjust, and operate a wide variety of machining equipment and a wide variety of parts to close tolerance. Make exacting setups. May select feeds, speeds, and operational sequence, calculate ratios, and proof/edit and manually program machining instructions.
  • Load/unload parts, cycle machine, and run designated quantity for production run. Maintain close proximity to work area as to be ready to detect/diagnose malfunction in machine operations (such as worn or damaged tools) and to determine need for adjustment or repair.
  • Recognize defective or faulty workmanship, correct and report issues to department lead.
  • Perform inspection of machined products (including documentation of results).
  • Communicate with co-workers regarding production runs.
  • Create/generate procedures of complexity for production processes (for machining of specific parts and issues).
  • Test new tools and methods.
  • Responsible for condition of the cell, machines, tooling, and fixtures.
  • May work closely with other departments (engineering, manufacturing engineering) to help smooth/streamline production processes.
  • Utilize Continuous Improvement tools to identify, reduce, eliminate waste and lower costs.
  • Adhere to all Standard Operating Procedures.
  • Keep work area and equipment clean and orderly (5s standard).
  • Work in a safe manner and follow all safety rules and procedures to ensure personal safety as well as safety of co-workers.
  • When limited/no work in area, will provide assistance to other departments based on workloads and customer needs.
  • Perform other duties as assigned.
Minimum Requirements
  • Prefer some short-term trades training and minimum one year prior machining experience.
  • Must be capable of learning to run PC accurately.
  • Ability to perform to verbal instructions as well as read/write English and interpret documents of some complexity including but not limited to: specifications, route sheets, blueprints, charts, test information, bills of material.
  • Ability to plan and perform a sequence of operations, where standard or recognized operation methods are available and make decisions as to quality, tolerances, operation, and set-up.
  • Ability to use power and hand tools, gauges, testing devices and small machines to assemble components to specifications and test.
  • Thorough knowled
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

3rd Shift Machinist
3rd Shift Machinist

regalrexnord • Charlotte (NC)

On-site
USD 50,000 - 70,000
Machinist - 2nd Shift Turning
Machinist - 2nd Shift Turning

regalrexnord • Union Grove (WI)

On-site
USD 25,000 - 39,000
Medical coverage
Dental coverage
Vision coverage
+6
Machinist - 2nd Shift
Machinist - 2nd Shift

Milwaukee Succeeds • Union Grove (WI)

On-site
USD 42,000 - 66,000
Medical, Dental, Vision
HSA/FSA options
401k with matching
+3
Machinist - 2nd Shift
Machinist - 2nd Shift

Regal Beloit America, Inc. • Union Grove (WI)

On-site
USD 40,000 - 56,000
Medical coverage
Dental coverage
Vision coverage
+3
2nd Shift Machinist
2nd Shift Machinist

Regal Rexnord Corporation • Charlotte (NC)

On-site
USD 40,000 - 60,000
401k Retirement Plan with Matching Contributions
Paid Time Off
Tuition Assistance
+1
3rd Shift Machinist
3rd Shift Machinist

Regal Rexnord Corporation • Charlotte (NC)

On-site
USD 45,000 - 75,000
Medical, Dental, Vision and Rx
Spending accounts (HSA, HSA/Dependent)
Paid Time Off and Holidays
+3
Machinist - 2nd Shift Turning
Machinist - 2nd Shift Turning

Regal Rexnord Corporation • Union Grove (WI)

On-site
USD 42,000 - 66,000
Medical coverage
Dental coverage
Vision coverage
+5
Machinist
Machinist

regalrexnord • Downers Grove (IL)

On-site
USD 32,000 - 41,000
401(k) with matching contribution
Medical/Dental/Vision Insurance
Short-Term and Long-Term Disability
+5
Maintenance Technician -2nd shift
Maintenance Technician -2nd shift

regalrexnord • Florence (KY)

On-site
USD 32,000 - 48,000
Medical, Dental, Vision insurance
401k with employer match
Paid time off & holidays
+2
CNC Machinist II - Mills - 2nd Shift
CNC Machinist II - Mills - 2nd Shift

regalrexnord • Simi Valley (CA)

On-site
USD 36,000 - 44,000
Medical, Dental, Vision
401k with employer match
PTO and Holidays
+2