Machinist (2nd Shift)

WANNER ENGINEERING INC; Minneapolis (MN); On-site; USD 66,124,800 - 107,452,800; Full time

Job summary

Wanner Engineering Inc. in Minneapolis, MN is seeking a Machinist II to independently set up, operate, and optimize CNC equipment for quality and throughput. The role requires advanced machining knowledge, program edits, offsets, tooling selection, and problem solving across shifts.

You will interpret blueprints, perform in-process inspections, and maintain tool life and process stability, with a focus on safety and ISO/QMS adherence.

Qualifications

• 5+ years machining experience in a CNC manufacturing environment.
• Ability to independently set up and run CNC mills/lathe with minimal supervision.
• Ability to edit feeds/speeds and manage offsets to maintain print requirements.
• Strong blueprint reading skills; working knowledge of GD&T.
• Proficiency with precision measurement tools and in-process inspection.
• Commitment to safety.

Responsibilities

• CNC Setup & Machining Operations: complete setups, workholding, tooling, offsets, first-piece validation.
• Run CNC equipment per schedule while meeting quality and efficiency targets.
• Edit programs to correct issues and improve cycle time.
• Set and adjust tool offsets; manage tool life and changes.
• Verify revision level of prints and setup documentation before production.
• Communicate status and handoff details to shifts to ensure continuity.
• Quality & Documentation: interpret blueprints and GD&T to meet print requirements.
• Perform first article and in-process inspections with calipers, micrometers, bore gauges, etc.
• Identify trends and take corrective actions to maintain capability.
• Complete production logs, counts, scrap reports, and QA forms.
• Escalate nonconforming conditions and support containment actions.
• Troubleshooting & Process Support: diagnose issues and implement corrective actions.
• Assist with continuous improvement and lean initiatives.
• Team Support & Leadership on Shift: guide operators and support cross-training.

Skills

CNC machining experience

Setup & operation

GD&T reading

Precision measurement

Tool offsets management

Tools

Nakamura-Tome turning centers

Calipers

Micrometers

Job description

Job DetailsJob Location: Minneapolis, MN 55403Salary Range: $23.25 - $37.80 HourlyPOSITION SUMMARY

A Machinist II at Wanner Engineering is responsible for independently setting up, operating, and optimizing CNC machining equipment to meet quality, production, and safety expectations. This role requires advanced machining knowledge including program edits, offsets, tooling selection, and troubleshooting of machining and process-related issues. The Shift Machinist supports throughput and quality goals by maintaining stable processes, resolving problems quickly, and ensuring continuity between shifts.

ESSENTIAL DUTIES & RESPONSIBILITIES

• CNC Setup & Machining Operations
  • Perform complete machine setups including workholding, tooling, offsets, probing routines (as applicable), and first-piece validation.
  • Run CNC equipment according to schedules and priorities while maintaining quality and efficiency targets.
  • Make program edits at the machine or offline (as allowed by procedure) to correct issues, improve cycle time, or maintain dimensional requirements.
  • Set and adjust tool offsets/wear offsets; manage tool life and tool change strategies to prevent scrap and downtime.
  • Verify correct revision level of prints/programs/setup documentation prior to running production.
  • Communicate status, issues, and handoff details to Leads/Supervisors and the next shift to maintain continuity.
• Quality & Documentation
  • Interpret blueprints, GD&T, and specifications to ensure parts meet print requirements.
  • Perform first article and in-process inspections using precision measuring tools (calipers, micrometers, bore gauges, height gage, indicators, etc.).
  • Identify trends/drift and take corrective action (offset changes, tooling changes, parameter adjustments) to maintain capability.
  • Complete required documentation including production logs, counts, scrap reports, WIP/move tags, setup/inspection records, and any quality forms required.
  • Escalate nonconforming conditions promptly and support containment actions as directed.
• Troubleshooting & Process Support
  • Troubleshoot machining and process issues including dimensional variation, surface finish concerns, chatter, tool breakage, workholding problems, and machine alarms.
  • Diagnose root causes (tooling, program, setup, fixturing, material, coolant, machine condition) and implement corrective actions within scope.
  • Support continuous improvement by recommending or implementing cycle-time reductions, setup improvements, mistake-proofing, and standard work updates.
  • Collaborate with Engineering/Quality/Leads to refine processes, improve repeatability, and reduce scrap.
• Equipment Care & Maintenance
  • Perform routine preventive maintenance checks (cleaning, lubrication, chip management, coolant checks, basic mechanical checks) per daily machine maintenance expectations.
  • Perform tool changes, basic machine adjustments, and minor repairs within training/authorization; coordinate with Supervisor for higher-level repairs.
  • Maintain an organized, clean, and safe work area (5S expectations).
• Team Support & Leadership on Shift
  • Provide guidance to operators or less-experienced machinists on the weekend shift (as needed) regarding setup, measurement, and safe operation.
  • Support cross-training efforts and help stabilize staffing by flexing across machines/cells when capable and assigned.
  • Promote safe work practices and support adherence to company policies and ISO/QMS requirements.

COMPANY EXPECTATIONS

• Work closely with team members, leads, and quality staff to meet production goals.
• Support lean initiatives and process improvement activities.
• Cross-train on other machines, work overtime, or assist other departments as needed to meet company objectives.
• Commit to procedures mandated by the ISO Quality Management System (QMS).
• Maintain a professional attitude and demeanor.
• Treat coworkers with respect and dignity.
• Be punctual and maintain good attendance.
• Maintain an organized and safe work environment and comply with Company Safety Manual/Procedures.

Qualifications

Required

• 5+ years machining experience in a CNC manufacturing environment (preferred overall range: 5–15 years).
• Demonstrated ability to independently set up and run CNC equipment (mills and/or lathes) with minimal supervision.
• Ability to edit adjust feeds/speeds and manage offsets to maintain print requirements.
• Strong blueprint reading skills; working knowledge of GD&T.
• Proficiency with precision measurement tools and in-process inspection methods.
• Strong mechanical aptitude, problem-solving skills, and commitment to safety.

Preferred

• Experience operating and setting up Nakamura-Tome turning centers is strongly preferred
• Experience with twin-spindle, twin-turret turning equipment, including machine setup, tooling selection, speeds and feeds adjustments, and in-process optimization.
• Ability to interpret tool offsets, work offsets, machine alarms, and diagnostic information to troubleshoot machining or equipment-related issues.
• Experience machining a variety of materials, including steel, stainless steel, and aluminum, while maintaining tight tolerances.
• Experience supporting continuous improvement / lean manufacturing initiatives.
• Forklift certification (or willingness to obtain).

WORK ENVIRONMENT AND PHYSICAL REQUIREMENTS

• Use of standard office/manufacturing equipment and PPE as required.
• Ability to lift up to 50 lbs.
• Ability to stand/walk throughout shift, and perform repetitive tasks.