Machine Shop Quality Inspector

Karman Space & Defense

Seattle (WA)

On-site

USD 41,000 - 55,000

Full time

1 hour ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Benefits offered by this job

Medical, dental, and vision insurance
401(k) with company match
Paid time off
Health Savings Account (HSA) with公司con
Flexible Spending Accounts (FSA)
Company-paid life and AD&D insurance
Short- and long-term disability

Job summary

Karman Space and Defense is seeking a Machine Shop Quality Inspector to ensure precision-machined components meet specs and quality standards. You will operate CMMs and portable measuring arms, interpret GD&T, and collaborate with machinists, QA, and Engineering to maintain product quality.

Responsibilities include performing various inspections, documenting results in ERP and QMS, and supporting AS9102 activities. The role requires at least 1–2 years on CMMs and U.S.

Qualifications

  • Strong mathematical, organizational, communication, and problem-solving skills with attention to detail.
  • Experience interpreting GD&T, engineering drawings, and precision measuring instruments.
  • Ability to setup and operate CMMs or portable measuring arms using approved inspection routines.
  • U.S. citizenship and ability to obtain DoD Secret clearance.

Responsibilities

  • Performs first-piece, in-process, final, and receiving inspections of machined components and assemblies to verify compliance with engineering and quality requirements.
  • Interprets drawings, specs, work instructions, and GD&T to determine inspection methods and acceptance criteria.
  • Sets up and operates CMMs and portable measuring arms with fixture alignment and measurement review.
  • Conducts dimensional inspections using calipers, micrometers, height and bore gauges, indicators, and other precision tools.
  • Maintains inspection records and supports AS9102 activities and traceability.
  • Identifies nonconforming material and verifies rework as assigned.
  • Ensures inspection equipment is calibrated and in good condition.
  • Communicates results and questions to machinists, QA, and Engineering.

Skills

Mathematical skills
Organizational skills
Communication
Problem solving
Attention to detail

Education

High school diploma or equivalent

Tools

Zeiss CMM
Hexagon CMM

Job description

Karman Space & Defense is a leader in the rapid design, development, and production of critical, next-generation system solutions that align with the U.S. Department of War and its allies’ core mission priorities, and meet the accelerating demand for access to space. Building on nearly 50 years of success, we deliver Payload & Protection Systems, Aero/Hydrodynamic Interstage Systems, and Propulsion & Launch Systems to more than 80 prime contractors supporting over 130 space and defense programs.

This role is part of our Tactical Missiles and Integrated Defense Systems business, which designs and develops integrated missile and defense systems that support critical missions across air, land, and sea. We combine comprehensive analysis, engineering, and program execution capabilities to deliver mission-tailored solutions that reduce lead times, lower costs, and simplify complex multi-vendor supply chains. Backed by decades of flight-proven and fielded performance, we design and build mission-critical technologies including launch systems, propulsion, payload integration solutions, UAV components, missile subsystems, and Safe & Arm systems.

As a Machine Shop Quality Inspector, you will help ensure precision-machined components and assemblies meet engineering specifications, dimensional requirements, and established quality standards. You will perform inspections throughout the manufacturing process, operate Coordinate Measuring Machines (CMMs) and portable measuring arms, and work closely with machinists, Quality, and Engineering teams to identify discrepancies, maintain accurate inspection records, and support consistent product quality.

Responsibilities
  • Performs first-piece, in-process, final, and receiving inspections of machined components and assemblies to verify compliance with engineering and quality requirements.
  • Interprets engineering drawings, specifications, work instructions, and Geometric Dimensioning and Tolerancing (GD&T) to determine appropriate inspection methods and acceptance criteria.
  • Sets up and operates CMMs and portable measuring arms using approved inspection routines, including part fixturing, alignment, probe qualification, and measurement-result review.
  • Conducts dimensional inspections using calipers, micrometers, height and bore gauges, indicators, pin and thread gauges, surface plates, optical comparators, and other precision measuring instruments.
  • Evaluates components for dimensional accuracy, burrs, edge breaks, surface finish, damage, identification, and other specified quality characteristics.
  • Completes inspection documentation and records measurement results in CMM, Enterprise Resource Planning (ERP), and electronic quality management systems.
  • Supports Aerospace First Article Inspection Requirement (AS9102) activities and maintains accurate part identification, inspection records, and traceability.
  • Identifies, documents, and controls nonconforming material and verifies reworked components as assigned.
  • Verifies inspection equipment is clean, suitable for use, and within required calibration status.
  • Communicates inspection results, discrepancies, and technical questions to machinists, supervisors, Quality, and Engineering personnel.
Required Qualifications
  • High school diploma or equivalent.
  • Minimum of 1–2 years of experience operating Zeiss or Hexagon CMM equipment.
  • Experience setting up and operating CMMs or portable measuring arms using approved inspection routines.
  • Experience inspecting machined components using engineering drawings, GD&T, and precision measuring instruments.
  • Ability to interpret mechanical drawings, specifications, work instructions, and dimensional tolerances.
  • Basic understanding of machining processes, materials, surface finishes, and common manufacturing defects.
  • Working knowledge of inspection equipment care, calibration requirements, part cleanliness, and measurement practices.
  • Ability to use computers, CMM software, ERP systems, and electronic inspection applications.
  • Strong mathematical, organizational, communication, and problem-solving skills with attention to detail.
  • Must be a U.S. citizen and be able to obtain and maintain a U.S. Department of Defense (DoD) Secret security clearance.
Preferred Qualifications
  • Two or more years of experience in dimensional inspection, machining, or related metrology activities.
  • Experience working within an AS9100 or comparable quality management system.
  • Technical or vocational training in machining, metrology, or quality inspection.
  • Experience using Epicor ERP software.
Physical Requirements
  • Ability to sit, stand, walk, bend, and reach for extended periods.
  • Ability to handle inspection tools, gauges, probes, fixtures, and components and safely position parts for inspection.
  • Visual acuity and manual dexterity sufficient to interpret engineering drawings and perform detailed dimensional inspections.
  • Ability to wear required personal protective equipment (PPE) and comply with established shop safety procedures.
  • The essential functions of this position must be performed with or without reasonable accommodation.
  • Work is performed in machine-shop, inspection, and metrology areas. The environment may include noise, moving equipment, metal chips, cutting fluids, sharp edges, and varying temperatures. Required safety procedures and personal protective equipment must be followed.
Travel Requirements
  • Occasional travel may be required for training or business needs.
  • Medical, dental, and vision insurance
  • 401(k) with company match
  • Paid time off
  • Health Savings Account (HSA) with company contribution
  • Flexible Spending Accounts (FSA)
  • Company-paid life and AD&D insurance
  • Short- and long-term disability coverage

Hourly Rate

$30 - $40 USD

Karman Space and Defense is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, protected veteran status, or any other status protected by applicable federal, state, or local law.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Metrology Engineering Technician
Metrology Engineering Technician

Karman Space & Defense • Arlington (WA)

On-site
USD 34,000 - 55,000
Medical, dental, and vision insurance
401(k) with company match
Paid time off
+4
CMM Programmer
CMM Programmer

Karman Space & Defense • Arlington (WA)

On-site
USD 55,000 - 66,000
Health insurance
401(k) with company match
Paid time off
+1
Quality Inspector
Quality Inspector

Karman Space & Defense • Huntington Beach (CA)

On-site
USD 28,000 - 37,000
Medical insurance
Dental insurance
Vision insurance
+6
CNC Machinist 5 Axis - 2nd Shift
CNC Machinist 5 Axis - 2nd Shift

Karman Space & Defense • Santa Ana (CA)

On-site
USD 37,000 - 41,000
Medical insurance
401(k)
Paid time off
+5
Quality Supervisor- 2nd Shift
Quality Supervisor- 2nd Shift

Karman Space & Defense • Huntington Beach (CA)

On-site
USD 96,000 - 115,000
Medical / dental / vision
401(k) match
Paid time off
+5
CNC Machinist - 1st Shift
CNC Machinist - 1st Shift

Karman Space & Defense • Mukilteo (WA)

On-site
USD 45,000 - 58,000
Medical, dental, and vision insurance
401(k) with company match
Paid time off
+4
Quality Inspector Lead
Quality Inspector Lead

Karman Space & Defense • Corona (CA)

On-site
USD 51,000 - 62,000
Medical, dental, and vision insurance
401(k) with company match
Paid time off
+4
Machine Shop Helper - 1st Shift
Machine Shop Helper - 1st Shift

Karman Space & Defense • Corona (CA)

On-site
USD 26,000 - 30,000
Medical, dental, and vision insurance
401(k) with company match
Paid time off
+4
Machine Shop Helper - 2nd Shift
Machine Shop Helper - 2nd Shift

Karman Space & Defense • Corona (CA)

On-site
USD 26,000 - 30,000
Medical, dental, and vision insurance
401(k) with company match
Paid time off
+5
Quality Engineer II
Quality Engineer II

SEEMANN COMPOSITES, LLC • Gulfport (MS)

On-site
USD 65,000 - 95,000
Medical insurance
Dental insurance
Vision insurance
+7