Machine Operator Day shift

Drake-Williams Steel

Omaha (NE)

On-site

USD 26,000 - 41,000

Full time

3 days ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Benefits offered by this job

Hiring bonus

Job summary

Drake-Williams Steel is seeking a Fabricator for their Omaha facility. The role involves fabricating parts for structural fabrication, service center, and miscellaneous steel assemblies based on cutting lists and shop drawings, while adhering to DWS quality requirements.

Essential duties include interpreting drawings, selecting correct materials, and operating forklifts and cranes. Minimum six months in a steel environment required; a thorough safety and quality mindset is essential.

Qualifications

  • Minimum of six months of experience in a steel manufacturing environment.
  • Ability to read, write, and perform basic arithmetic.
  • Ability to understand and follow semi-complicated verbal and written instructions.
  • Ability to communicate effectively with coworkers and supervisors.
  • Ability to pass Drake-Williams Steel aptitude test (shop drawing interpretation, fractional math, etc.).
  • Ability to interpret, understand and utilize cutting lists, shop orders, and shop drawings.
  • Ability to use a computer for cut-lists and inventory purposes.
  • Pride in workmanship with attention to detail and safety.

Responsibilities

  • Identify steel shapes, sizes, and tolerances.
  • Fabricate materials according to cut lists and drawings.
  • Forge beams, tubes, angles, channels, and other steel shapes per drawings and codes.
  • Adjust machines to achieve precise dimensions as per drawings.
  • Identify and resolve drawing or cut-list discrepancies early.
  • Operate forklifts, jib cranes, overhead cranes, conveyors, and material transfer systems.
  • Attend management meetings and work scheduled hours reliably.
  • Perform other duties as assigned by management.

Skills

Reading & writing
Arithmetic
Shop drawings
Communication
Attention to detail
Forklift operation
Crane operation

Tools

Pencil
Square
Tape measure
Markers
Ball peen hammer
Wire brushes
Grinder
Sledgehammer
Grab hooks
Vise grips
Allen wrenches
Pry-bar
C-clamps
Band cutters
Chains

Job description

Job Details: Job Location: Rebar - Omaha, NE 68108, Position Type: Full Time, Salary Range: $19.00 - $30.00 Hourly, Job Shift: 2nd Shift (3:15 P.M. - 1:45 A.M.), $5,000 Hiring Bonus!

Primary Purpose of this Position:

Fabricate parts for structural fabrication, Service Center, and misc. steel assemblies per cutting lists, shop drawings, and DWS quality requirements.

Essential Job Functions:
  • Identify steel shapes, sizes, and mill tolerances.
  • Fabricate material as trained and instructed.
  • Fabricate beams, tubes, angle, channel, bar grating, pipe, plate, or rounds according to the dimensions shown on cut lists and shop drawings, AISC code requirements for structural steel, and machine capabilities.
  • Make adjustments to machine to ensure accurate dimensions as shown on the shop drawings.
  • Identify cut list and shop drawing errors and discrepancies before or during early stages of fabrication.
  • Operate forklifts, jib cranes, overhead cranes, conveyors, and transfers in order to move materials.
  • Any other duties assigned by management.
  • Attend all meetings as required by management.
  • Consistently and reliably works scheduled hours at assigned locations.
Qualifications: Knowledge, Skills and Abilities:
  • Ability to read, write, and perform higher arithmetic computations involving addition, subtraction, multiplication and division of whole numbers, decimals and fractions.
  • Ability to understand and carry out semi-complicated verbal and written instructions.
  • Ability to effectively communicate with co-workers, supervisors and managers.
  • Ability to work under periodic supervision focused on the progress of work and setting priorities for job completion.
  • Skill in using auto measurer, tape measure, or 1 rule.
  • Ability to pass a Drake-Williams Steel administered test that covers shop drawing interpretation, fractional number calculations, basic geometry, etc.
  • Ability to interpret, understand and utilize cutting lists, shop orders, and shop drawings.
  • Ability to use a computer for cut-lists and inventory purposes.
  • Ability to possess pride in own workmanship; demonstrate attention to detail, and work safely.
  • Ability to operate forklifts and overhead cranes in a safe and proper manner. Use and understand industry and Drake-Williams Steel adopted hand signals used for crane operations.
  • Perform minor mechanical tasks on machine (blade changes, cleaning, etc.)
  • Ability to follow inventory procedures.
  • Ability to multi-task.
Physical Demands:
  • Stand FREQUENTLY over the course of the 8 to 12 hour work shift.
  • Walk OCCASIONALLY to FREQUENTLY over the course of the 8 to 12 hour work shift. The distances walked will range from a distance of a few feet to 60 foot.
  • Sit only during the break and lunch periods. Rarely one will be able to sit while cutting material.
  • Lift weights up to 20 pounds from floor to chest CONTINUOUSLY, which includes the various tools utilized in the process of performing the usual work duties.
  • Lift weights up to 35 pounds from floor to waist FREQUENTLY during the 8 to 12 hour work shift
  • Lift weights up to 60 pounds from floor to waist OCCASIONALLY during the work shift. Jib cranes and overhead cranes are available for the employees assistance with lifting.
  • Carry weights noted above distances ranging from a few feet to 60 foot.
  • Climb OCCASIONALLY onto or over the conveyors.
  • Stoop or crouch OCCASIONALLY while performing the regular job duties. The position will be held continuously for a few seconds to 15 minutes, depending upon the job.
  • Kneel in the commission of job duties OCCASIONALLY, depending upon the job.
  • Crawl RARELY up to 10 feet to access tools, materials, etc.
  • Reach forward OCCASIONALLY to perform job duties or to retrieve tools. The employee will OCCASIONALLY be required to reach to full forward extension.
  • Reach overhead OCCASIONALLY to guide material attached to the cranes and to attach the chains from the crane to the material.
  • Push and pull drawers open OCCASIONALLY to FREQUENTLY to retrieve tools. Employee will OCCASIONALLY push material attached to a jib crane or overhead crane to properly guide into place. Force varies up to 35 pounds.
  • Push material OCCASIONALLY into machine for fabrication. (SHEAR)
  • Gross finger dexterity skills required to operate the various tools and equipment utilized in the course of standard job duties. Fine finger dexterity is not required.
Non-Material Handling Demands:
  • Employee is expected to work 40 hours a week. However, hours including overtime and weekends may be required based on Drake-Williams Steels needs.
  • Hear sufficiently to be aware of safety issues
  • Visual ability to read and interpret shop drawings. Safety glasses are required in the shop area.
  • Exposure to heat, cold, wet and humid conditions in the shop area OCCASIONALLY.
  • Exposure to fumes, odors and dusts in the shop area OCCASIONALLY.
  • Exposure to solvents, greases, oils, and coolants OCCASIONALLY.
  • Wear all required Personal Protective Equipment. PPE includes steel-toe safety shoes, hearing protection, safety glasses, gloves, and hard hats.
Tools Required:
  • Pencil, Square, Tape Measure, Markers, Ball Peen Hammer, Wire Brushes, 4 Grinder, SledgeHammer, Grab Hooks, Vise Grips, Allen Wrenches, Pry-Bar, C-Clamps, Band Cutters, and Chains.
Machines Utilized:
  • Saw, Overhead Crane, Jib Crane, Pallets, Transfers, Brake, Blaster, Punch, Shear, and Forklifts.
Experience and Education Required:
  • Minimum of six months of experience in a steel manufacturing environment.

Please visit our Employee Benefits page for more information!

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Machine Operator Night Shift
Machine Operator Night Shift

Drake-Williams Steel • Omaha (NE)

On-site
USD 26,000 - 41,000
Hiring bonus
Day shift laser operator
Day shift laser operator

DW Steel • Omaha (NE)

On-site
USD 26,000 - 41,000
Night shift laser operator
Night shift laser operator

DW Steel • Omaha (NE)

On-site
USD 26,000 - 41,000
Day shift laser operator
Day shift laser operator

Drake-Williams Steel, Inc. • Omaha (NE)

On-site
USD 42,000 - 52,000
Machine Operator Day shift
Machine Operator Day shift

Drake-Williams Steel, Inc. • Omaha (NE)

On-site
USD 25,000 - 39,000
Night shift laser operator
Night shift laser operator

Drake-Williams Steel, Inc. • Omaha (NE)

On-site
USD 25,000 - 39,000
Machine Operator Night Shift
Machine Operator Night Shift

Drake-Williams Steel, Inc. • Omaha (NE)

On-site
USD 25,000 - 39,000
Material Handler Day shift
Material Handler Day shift

Drake-Williams Steel, Inc. • Omaha (NE)

On-site
USD 21,000 - 30,000
Hiring bonus
Material Handler Night Shift
Material Handler Night Shift

Drake-Williams Steel, Inc. • Omaha (NE)

On-site
USD 36,000 - 42,000
Hiring bonus
Day shift welder
Day shift welder

DW Steel • Omaha (NE)

On-site
USD 26,000 - 41,000