Lead Technical Auditor

Association for Materials Protection and Performance (AMPP)

Houston (TX)

On-site

USD 90,000 - 120,000

Full time

8 days ago

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

AMPP seeks a Lead Technical Auditor to perform field and office audits supporting the AMPP Accreditation program. The role emphasizes technical auditing, report writing, and mentorship, with about 60% audit activity and 40% managerial support.

The candidate must have at least five years in industrial coatings audits, relevant AMPP/CIP certifications, and be willing to travel extensively. A security clearance and US passport are required.

Qualifications

  • Minimum five years of full-time experience in industrial coatings audits.
  • AMPP/SSPC Competent Person/Supervisor for Deleading experience.
  • Two-day (16-hour minimum) course on the Principles of Auditing or equivalent.
  • Willingness to travel 75%+ and obtain security clearance.
  • Experience with MS Office and industry-related software.

Responsibilities

  • Conduct field and office audits to verify compliance with AMPP-SSPC procedures and related programs.
  • Submit audit reports on time and in proper format.
  • Audit AMPP training programs and verify instructor compliance.
  • Review CAPs and DAC issues; assist AB-1 submittals and investigations.
  • Mentor new audit hires and provide on-the-job training.

Skills

Audit planning
Technical auditing
Report writing
Travel coordination
Regulatory compliance

Education

AMPP CIP Level II
AMPP CIP III
OSHA 30-hour
AMPP C3/C5 certifications
AMPP SSPC training (e.g., Concrete Coating Inspector)

Tools

Microsoft Office
Audit software

Job description

SUMMARY

The Lead Technical Auditor conducts field and office audits in support of the AMPP Accreditation program and serves as a senior technical resource supporting the Technical Auditor Manager. The role is split approximately 60/40: about 60 percent of time is spent conducting audits, and the remaining 40 percent is spent supporting the Technical Auditor Manager by reviewing audit reports and documenting Corrective Action Plan (CAP) and DAC (Disciplinary Action Committee) issues. The Lead Technical Auditor also assists with AB-1 submittal reviews and facility owner complaint investigations. The role includes auditing AMPP training programs as assigned.

ESSENTIAL DUTIES AND RESPONSIBILITIES
  • Conduct field and office audits of organizations (e.g., coating contractors, blast and paint shops, coating inspection firms) to verify compliance with AMPP-SSPC qualification procedures (e.g., QP 1, QP 2, QP 3, QP 5, QP 8, QS 1, QN 1, and others) and associated administrative programs (minimum of 45 audits/training delivery events per year). Submit audit reports in a timely manner and in the proper format.
  • Audit AMPP training programs as assigned. Verify instructors' compliance with AMPP administrative procedures and adherence to technical content.
  • Verify audited companies are compliant with current industry standards as cited in contracts, specifications, regulations, product data sheets, etc.
  • Support the Technical Auditor Manager in representing AMPP Accreditation at industry meetings and conferences, providing technical knowledge and subject-matter expertise on technical and regulatory issues as assigned.
  • Support AMPP Accreditation Management in improving the development, implementation, and administration of all QP accreditation programs.
  • Ability and experience working remotely with a high degree of autonomy and responsibility to complete audits and administrative tasks on time using a predetermined format without daily direct supervision.
  • Complete audit reports and other related documents on a timely basis, and report the status of work and travel schedules to QP Management in a timely manner.
  • Complete AMPP or other assigned training on QP accreditations and programs.
  • Conduct at least one audit in each assigned accreditation category under the observation of QP Management or their assigned representative.
  • Review audit reports and make recommendations to the Technical Auditor Manager.
  • Assist the Technical Auditor Manager with the CAP (Corrective Action Plan) process, including reviewing and documenting submitted CAPs and recommending acceptance or requests for additional information on findings.
  • Assist in investigating and documenting DAC (Disciplinary Action Committee) violations, allegations, and notifications to determine validity and recommend appropriate actions to the Technical Auditor Manager.
  • Assist with the review of AB-1 submittals and make recommendations to the Technical Auditor Manager.
  • Investigate facility owner complaints to identify potential nonconformance and determine if probable cause actions are warranted.
  • Mentor new audit hires during their initial on-the-job training period. This includes conducting on-the-job training in the field and reviewing and critiquing audit reports prepared by new hires.
  • Provide emergent technical and administrative support to staff and QP Contractors.
SUPERVISORY RESPONSIBILITIES

No supervisory responsibilities are required for this role. The Lead Technical Auditor supports the Technical Auditor Manager but does not have management responsibilities.

QUALIFICATION REQUIREMENTS

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

  • Organization and coordination of audits. Individual must be able to develop and work within a weekly schedule, making cost-effective and efficient travel arrangements. Individual should have the ability to handle multiple assignments and write detailed and accurate audit reports that are submitted in a timely manner.
  • Individual will interface with members, owners, contractors, inspectors, and their representatives at job sites and offices, respectively.
TRAVEL AND SECURITY CLEARANCE REQUIREMENTS

This role requires significant travel (i.e., 75% or more of time). Additionally, the role will require the employee to obtain security clearance to access military bases, shipyards and other locations. Accordingly, the employee must have a valid U.S. passport, valid US Driver's License and must participate and cooperate in the security clearance processes.

EDUCATION and/or EXPERIENCE
  • Minimum: AMPP CIP Level II or AMPP Protective Coating Specialist in good standing. CIP III is desirable. AMPP C3/C5 certifications are required and must be attained within the first 60 days of employment. OSHA 30-hour training is required and must be attained within the first 60 days of employment. Specialty certifications and training, such as AMPP SSPC Concrete Coating Inspector, Metalizing, OCAT, and SCAT training, are desirable.
  • Meet the experience requirements of the AMPP/SSPC Competent Person/Supervisor for Deleading of Industrial Structures.
  • Minimum of five (5) years of full-time experience in the industrial coatings industry, preferably conducting technical quality or safety audits, coating and lining inspection services, or related work.
  • Complete a two-day (16-hour minimum) course on the Principles of Auditing or equivalent.
  • Experience in using Microsoft Office and industry-related software is required.
LANGUAGE SKILLS

Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write technical standards and reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, members, employees of the organization, customers, and the general public.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Lead Technical Auditor
Lead Technical Auditor

Association for Materials Protection and Performance (AMPP) • United States

On-site
USD 90,000 - 130,000
Senior Field Auditor and Accreditation Specialist
Senior Field Auditor and Accreditation Specialist

Association for Materials Protection and Performance (AMPP) • United States

On-site
USD 90,000 - 130,000
Senior Director, Standards & Technical Engagement
Senior Director, Standards & Technical Engagement

Association for Materials Protection and Performance (AMPP) • Houston (TX)

On-site
USD 180,000 - 240,000
Blasting and Painting Supervisor (NACE Level 2)
Blasting and Painting Supervisor (NACE Level 2)

Global Riser • New Iberia (LA)

On-site
USD 85,000 - 120,000
QA/QC Inspector III
QA/QC Inspector III

Acco Engineered Systems • San Leandro (CA)

On-site
USD 90,000 - 130,000
QA/QC Inspector III
QA/QC Inspector III

Acco Engineered Systems • Columbus (OH)

On-site
USD 85,000 - 110,000
QA/QC Supervisor
QA/QC Supervisor

Acco Engineered Systems • Cedar City (UT)

On-site
USD 90,000 - 120,000
Relocation assistance
Sign-on bonus
Per diem & subsistence
Senior Director, Standards & Technical Engagement
Senior Director, Standards & Technical Engagement

Association for Materials Protection and Performance • Houston (TX)

On-site
USD 140,000 - 200,000
QA/QC
QA/QC

HR Group LLC Companies • Prague (OK)

On-site
USD 80,000 - 110,000
On the job training
Certification support
Career growth within The HR Group
Manager, Technical Program Operations
Manager, Technical Program Operations

AMPP: Association for Materials Protection and Performance • Houston (TX)

On-site
USD 110,000 - 140,000