Lead Generator Production Engineer Pensacola

GE-Vernova-; Pensacola (FL); On-site; USD 98,000 - 164,000; Full time

Benefits offered by this job

Relocation assistance

Comprehensive benefits package

Job summary

GE Vernova Lead Generator Design Liaison Engineer on the Pensacola, FL floor provides advanced technical leadership to translate design intent into manufacturable, high-quality production outcomes across generator components.

You will work with design, manufacturing, quality and operations, resolve issues, drive producibility improvements, mentor junior engineers, and support the lifecycle of GE Vernova's 50 Hz and 60 Hz generators across rotating shifts.

Qualifications

• Bachelor’s degree in Mechanical or Electrical Engineering.
• Minimum of five (5) years in generator or manufacturing engineering or a design/manufacturing liaison role.
• Technical knowledge of rotor, armature core, winding, laminations, and armature bars.
• Ability to interpret engineering drawings and manufacturing documentation.
• Experience leading cross-functional technical problem solving on the shop floor.

Responsibilities

• Serve as the primary technical interface between generator design engineering and manufacturing on the factory floor.
• Drive continuous improvements in design manufacturability while balancing performance, quality, safety, and cost.
• Engage early in the design process and participate in design reviews focusing on manufacturability.
• Lead resolution of design-to-manufacturing issues across rotor, core, winding, laminations, and bars.
• Translate engineering requirements into clear directions for manufacturing teams.
• Partner with shop operations to resolve nonconformances and lead root-cause and corrective actions.
• Identify and mitigate risks in design-to-manufacturing transfer and feed lessons back into design standards.
• Support new product introductions, design changes, and lean/continuous improvement initiatives.
• Ensure compliance with engineering, quality, and safety standards.
• Provide direct technical support across all three shifts as needed.

Skills

Generator engineering

Manufacturing engineering

Cross-functional collaboration

Root cause analysis

Interpreting drawings

Education

Bachelor's degree in Mechanical or Electrical Engineering

Job description

Job Description Summary

GE Vernova is seeking a Lead Generator Design Liaison Engineer to provide advanced technical leadership for manufacturing operations at our Pensacola, FL facility. This role serves as the primary technical interface between generator design engineering and manufacturing, ensuring design intent is translated into manufacturable, high-quality, and cost-effective production outcomes across critical generator components.

Working closely with design, manufacturing, quality, and operations teams, this engineer will resolve technical issues, improve producibility, and support execution throughout the product lifecycle of GE Vernova’s 50 Hz and 60 Hz air-cooled, hydrogen-cooled, and liquid-cooled generators. This individual will also mentor junior engineers.

This position requires a continuous presence on the production floor and flexibility to support operations across rotating 1st, 2nd, and 3rd shifts.

The scope of responsibility includes support for all major generator sub-systems, including:

• Rotor


• Armature (stator) core


• Armature winding


• Armature core steel punching/lamination


• Armature bars

Job Description

Roles and Responsibilities

• Serve as the primary technical interface between generator design engineering and manufacturing on the factory floor.


• Drive continuous, systematic improvements in generator design manufacturability while maintaining performance, quality, safety, and cost targets.


• Engage early in the design process and participate in design reviews with a focus on manufacturing feasibility, producibility, and process capability.


• Lead resolution of design-to-manufacturing technical issues across the following areas:
  
  
  
  • Generator rotor
  
  
  • Armature core
  
  
  • Armature winding
  
  
  • Armature core steel punching/lamination
  
  
  • Armature bars
  
  
  
  


• Translate engineering requirements, drawings, and specifications into clear direction for manufacturing teams and support successful implementation.


• Partner with shop operations to resolve nonconformances and deviations and lead root cause, corrective action, and preventive action efforts.


• Identify and mitigate risks associated with design-to-manufacturing transfer.


• Capture and feed manufacturing lessons learned back into design standards and product improvements.


• Support new product introductions, design changes, and lean/continuous improvement initiatives.


• Ensure compliance with applicable engineering, quality, and safety standards.


• Provide direct technical support and oversight across all three shifts, as needed

Expectations

• Strong alignment between design intent and manufacturing execution


• Reduced manufacturing disruptions caused by design-related issues


• Timely resolution of technical issues affecting production


• Measurable improvements in quality, producibility, and cost performance


• Effective support for design changes and new product introductions

Required Qualifications

• Bachelor’s degree in Mechanical Engineering, Electrical Engineering, or a related discipline.


• Minimum of five (5) years of experience in generator engineering, manufacturing engineering, or a design/manufacturing liaison role.


• Strong technical knowledge of large generator components and manufacturing processes in one or more of the following areas:
  
  
  
  • Rotor construction
  
  
  • Armature core build
  
  
  • Armature winding
  
  
  • Armature lamination punching processes
  
  
  • Armature bar design and manufacturing
  
  
  
  


• Proficiency in interpreting engineering drawings, specifications, and manufacturing documentation.


• Demonstrated ability to lead cross-functional technical problem-solving efforts.


• Strong communication and collaboration skills across engineering, manufacturing, quality, and operations.


• Experience with root cause analysis and corrective/preventive action methodologies.


• Strong understanding of production planning, quality systems, and factory floor constraints.

Desired Characteristics

• Advanced degree in engineering or a related field.


• Experience in a generator OEM, heavy electrical equipment, or similar industrial environment.


• Knowledge of insulation systems, rotor and armature assembly, and manufacturing quality controls.


• Familiarity with lean manufacturing and structured problem-solving methodologies.


• Experience with product lifecycle management, design change control, and configuration management.


• Prior hands-on experience working with shop floor teams and supplier technical interfaces.


• Strong ownership, accountability, and urgency in issue resolution.


• Practical, hands-on engineering mindset with the ability to balance design intent with manufacturing realities.


• Strong influencing and collaboration skills across functions and levels.


• Lean/continuous improvement mindset.

Note: There is no sponsorship now or in the future for this role.

• 
  

  Note:

  
  

  To comply with US immigration and other legal requirements, it is necessary to specify the minimum number of years' experience required for any role based within the USA.

  
  

  For roles outside of the USA, to ensure compliance with applicable legislation, the JDs should focus on the substantive level of experience required for the role and a minimum number of years should NOT be used.

  
  

GE Vernova offers a great work environment, professional development, challenging careers, and competitive compensation. GE Vernova is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

GE Vernova will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable).

Relocation Assistance Provided: Yes

For candidates applying to a U.S. based position, the pay range for this position is between $98,400.00 and $164,000.00. The Company pays a geographic differential of 110%, 120% or 130% of salary in certain areas. The specific pay offered may be influenced by a variety of factors, including the candidate’s experience, education, and skill set.Bonus eligibility: discretionary annual bonus.

Available benefits include medical, dental, vision, and prescription drug coverage; access to Health Coach from GE Vernova, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Vernova Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and financial planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability benefits, life insurance, 12 paid holidays, and permissive time off.

GE Vernova Inc. or its affiliates (collectively or individually, “GE Vernova”) sponsor certain employee benefit plans or programs GE Vernova reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a GE Vernova welfare benefit plan or program. This document does not create a contract of employment with any individual.