LEAD ENGINEER - PRINCIPAL ENGINEER - Avionics Embedded OFP Architect (ARINC 653 RTOS)

Southwest Research Institute

San Antonio (TX)

On-site

USD 120,000 - 180,000

Full time

9 days ago
Application generator

Stand out for this role — generate a tailored resume and cover letter in about a minute.

Get past ATS filters

Job summary

Southwest Research Institute’s Tactical Aerospace division is seeking a senior avionics architect to design multi-partition, multi-DAL systems within an ARINC 653 environment. You will lead engineering teams through full development cycles, from requirements to flight test, coordinating with customers and upper management to meet mission objectives.

You will mentor teams, develop LRUs for airborne and ground systems, and drive integration efforts in lab, SIL, and aircraft environments while

Qualifications

  • 8+ years: embedded architecture design in RTOS multi-partition, multi-criticality environments.
  • 2-5 years: experience leading development and test engineering teams.

Responsibilities

  • Collaborate with cross-disciplinary teams to develop avionics LRUs for airborne and ground systems.
  • Mentor and develop complex embedded systems through full development cycle (Requirements, design, V&V, qualification).
  • Lead integration in lab, SIL, and aircraft; coordinate with customers and management.
  • Support marketing and proposal activities and contribute to product/technology roadmaps.

Skills

C/C++
Embedded systems
RTOS experience
Leadership
Debugging
Software/hardware integration

Education

Bachelor's degree in Computer Engineering or Electrical Engineering

Tools

Green Hills RTOS
DDC-I DEOS
LDRA

Job description

Who We Are

Southwest Research Institute's (SwRI) Tactical Aerospace provides world-class design, development, and test solutions. We provide avionics and payload/mission equipment for airborne/ground systems for new and legacy platforms for the DoD industry, Allies, and U.S. Government. This position may reside in one of our primary sites (San Antonio, TX, Warner Robins, GA, or Beavercreek, OH).

Objectives of this Role

Architect and design multi-partition, multi-DAL systems within a ARINC 653 environment. Lead engineering teams to develop complex microprocessor based avionics/mission/payload LRU's through the full development cycle (Requirements, design, development, sw/hw integration, V&V, qualification, flight test, etc). Lead integration efforts within the lab, SIL, and ultimately the aircraft. Coordinate with customers and upper management. Support fielded LRU's and marketing efforts.

Daily and Monthly Responsibilities

Collaboratively work with teams to develop avionics grade LRUs for airborne and ground systems. These teams consist of core disciplines across Systems, Electrical, Software, Firmware, and Mechanical engineering. Mentor, guide, and develop complex embedded systems. Development includes the full life cycle from requirements and architectures through V&V and integration. Support Department management in specific marketing activities, writing proposals, and developing product/technology roadmaps. Interact directly with clients and company staff to establish requirements and architectures to meet client expectations.

Requirements
  • Requires a Bachelors degree in Computer Engineering, Electrical Engineering, or equivalent engineering degree.
  • 8+ years: Experience designing embedded architecture designs within a RTOS multi partition, multi criticality environment.
  • Experience with RTOS (Green Hills or DDC-I DEOS) development environment as well as LDRA.
  • Experience with C/C++.
  • 2-5 years: Experience leading development and test engineering teams to meet program needs.
  • Experience with integrating software onto hardware and debugging within a lab environment utilizing equipment such as logic analyzers, power supplies, etc.
  • A valid/clear driver's license is required.
Special Requirements

Applicant selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information. Applicant must be a U.S. citizen.

Job Locations

San Antonio, Texas Or Dayton, Ohio

For more information about this division, visit the Defense & Intelligence Solutions home page.

For benefits information at our San Antonio location, click here.

For benefits information at all other locations, click here.

An Equal Employment Opportunity Employer: race, color, religion, sex, national origin, disability, and veteran status.
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

LEAD ENGINEER - PRINCIPAL ENGINEER - Avionics Embedded OFP Architect (ARINC 653 RTOS)
LEAD ENGINEER - PRINCIPAL ENGINEER - Avionics Embedded OFP Architect (ARINC 653 RTOS)

Southwest Research Institute • Dayton (OH)

On-site
USD 140,000 - 190,000
LEAD ENGINEER - PRINCIPAL ENGINEER - Avionics Embedded OFP Architect
LEAD ENGINEER - PRINCIPAL ENGINEER - Avionics Embedded OFP Architect

Southwest Research Institute • San Antonio (TX)

On-site
USD 140,000 - 190,000
LEAD ENGINEER - PRINCIPAL ENGINEER - Aerospace Systems Engineer
LEAD ENGINEER - PRINCIPAL ENGINEER - Aerospace Systems Engineer

Southwest Research Institute • San Antonio (TX)

On-site
USD 90,000 - 120,000
LEAD ENGINEER - PRINCIPAL ENGINEER - Aerospace Systems Engineer
LEAD ENGINEER - PRINCIPAL ENGINEER - Aerospace Systems Engineer

Southwest Research Institute • Town of Texas (WI)

On-site
USD 80,000 - 120,000
LEAD ENGINEER - PRINCIPAL ENGINEER - Aerospace Systems Engineer
LEAD ENGINEER - PRINCIPAL ENGINEER - Aerospace Systems Engineer

Southwest Research Institute • Town of Texas (WI)

On-site
USD 80,000 - 120,000
LEAD ANALYST - LEAD ENGINEER - PRINCIPAL ENGINEER - Systems Engineer
LEAD ANALYST - LEAD ENGINEER - PRINCIPAL ENGINEER - Systems Engineer

Southwest Research Institute • Kentucky

On-site
USD 90,000 - 120,000
LEAD ENGINEER - PRINCIPAL ENGINEER - Power Supply Circuit Designer/Analog Design
LEAD ENGINEER - PRINCIPAL ENGINEER - Power Supply Circuit Designer/Analog Design

Southwest Research Institute • Kentucky

On-site
USD 120,000 - 160,000
LEAD ENGINEER - PRINCIPAL ENGINEER - RF Electrical/Circuit Design
LEAD ENGINEER - PRINCIPAL ENGINEER - RF Electrical/Circuit Design

Southwest Research Institute • San Antonio (TX)

On-site
USD 120,000 - 180,000
LEAD ENGINEER - PRINCIPAL ENGINEER - RF Electrical/Circuit Design
LEAD ENGINEER - PRINCIPAL ENGINEER - RF Electrical/Circuit Design

Southwest Research Institute • San Antonio (TX)

On-site
USD 120,000 - 180,000
LEAD ENGINEER - PRINCIPAL ENGINEER - RF Electrical/Circuit Design
LEAD ENGINEER - PRINCIPAL ENGINEER - RF Electrical/Circuit Design

Southwest Research Institute • Town of Texas (WI)

On-site
USD 120,000 - 170,000