Laborer - Line loader (2nd Shift)

EMIT Technologies, Inc.

Sheridan (WY)

In loco

USD 25.000 - 28.000

Tempo pieno

9 giorni fa

Una candidatura completa in un minuto

Curriculum e lettera di presentazione personalizzati, pronti da inviare.

Supera i filtri ATS

Descrizione del lavoro

EMIT Technologies, Inc. is seeking a Line Load Operator to securely load parts onto the powder coat line and visually inspect them for defects before coating. The role emphasizes safe handling, correct sequencing, and adherence to daily production schedules.

You will verify part positioning, remove non-conforming pieces, and maintain a clean, hazard-free work area while following all PPE requirements and safety procedures.

Competenze

  • High school diploma or equivalent preferred.
  • Previous manufacturing, production, or material handling experience preferred.
  • Ability to safely lift and move materials weighing up to 75 pounds repeatedly throughout the shift.
  • Ability to stand, walk, bend, reach, and perform repetitive physical tasks for the duration of the workday.
  • Strong attention to detail and commitment to producing quality work.
  • Ability to read and follow work instructions, production schedules, and safety procedures.
  • Ability to work effectively in a fast-paced manufacturing environment while maintaining productivity and accuracy.
  • Strong communication and teamwork skills.
  • Willingness to learn and follow EMIT's quality, safety, and operational standards.
  • Ability to safely use material handling equipment, lifting devices, and production tools as required.

Mansioni

  • Safely and securely load parts onto the automated powder coat line using hooks, fixtures, and rigging.
  • Follow the daily production schedule to ensure parts are loaded in the correct sequence.
  • Handle parts carefully during loading to prevent damage, contamination, or distortion.
  • Maintain a consistent loading pace to support uninterrupted production flow.
  • Verify parts are properly positioned and secured to ensure coating coverage.
  • Perform a visual inspection of each part before loading to identify surface defects such as scratches, rust, or dirt.
  • Remove non-conforming parts from the production flow and prevent them from entering the coating process.
  • Communicate quality concerns promptly to the Production Supervisor or Line Lead.
  • Support quality standards by ensuring only properly prepared parts enter the powder coat line.
  • Place rejected parts in the designated hold area and clearly identify them.
  • Notify appropriate personnel of quality concerns requiring rework or corrective action.
  • Assist in maintaining traceability of rejected materials.
  • Maintain a clean, hazard-free work area and remove scrap materials as needed.
  • Follow all safety policies, PPE requirements, and report unsafe conditions.

Conoscenze

Attention to detail
Teamwork
Communication
Safety awareness
Read and follow instructions

Formazione

High school diploma or equivalent

Descrizione del lavoro

The Line Load position is a key role in EMIT's manufacturing facility. This position is responsible for safely and efficiently loading prepped parts onto the automated powder coat line. The Line Load Operator ensures parts are properly hung, visually inspected, and sequenced according to the production schedule to support consistent throughput and high-quality finished products.

Key Accountabilities:
Line Loading
  • Safely and securely load parts onto the automated powder coat line using the appropriate hooks, fixtures, and rigging.
  • Follow the daily production schedule to ensure parts are loaded in the correct sequence.
  • Handle parts carefully during loading to prevent damage, contamination, or distortion.
  • Maintain a consistent loading pace to support uninterrupted production flow.
  • Verify that parts are properly positioned and secured to ensure effective coating coverage.
Visual Inspection
  • Perform a visual inspection of each part before loading to identify scratches, rust, weld spatter, oil, dirt, or other surface defects.
  • Remove any non-conforming parts from the production flow and prevent them from entering the coating process.
  • Communicate quality concerns promptly to the Production Supervisor or Line Lead.
  • Support quality standards by ensuring only properly prepared parts enter the powder coat line.
  • Place rejected or non-conforming parts in the designated hold area.
  • Clearly identify rejected parts according to company procedures.
  • Notify the appropriate personnel of quality concerns requiring rework or corrective action.
  • Assist in maintaining accurate identification and traceability of rejected materials.
  • Maintain a clean, organized, and hazard-free work area throughout the shift.
  • Remove scrap materials, empty pallets, packaging, and other debris as needed.
  • Follow all company safety policies, procedures, and PPE requirements.
  • Immediately report unsafe conditions, equipment issues, or potential hazards.
  • Support EMIT's commitment to maintaining a safe and efficient manufacturing environment.
Qualifications:
  • High school diploma or equivalent preferred.
  • Previous manufacturing, production, or material handling experience preferred.
  • Ability to safely lift and move materials weighing up to 75 pounds repeatedly throughout the shift.
  • Ability to stand, walk, bend, reach, and perform repetitive physical tasks for the duration of the workday.
  • Strong attention to detail and commitment to producing quality work.
  • Ability to read and follow work instructions, production schedules, and safety procedures.
  • Ability to work effectively in a fast-paced manufacturing environment while maintaining productivity and accuracy.
  • Strong communication and teamwork skills.
  • Willingness to learn and follow EMIT's quality, safety, and operational standards.
  • Ability to safely use material handling equipment, lifting devices, and production tools as required.
Physical & Safety Requirements:
  • Ability to lift up to 50–75 lbs. repeatedly.
  • Comfortable standing, walking, and moving for the duration of a shift.
  • Always use proper PPE when required.
  • Follow safety protocols when using tools and handling materials.
We are an equal opportunity employer and welcome candidates from all backgrounds.

Pay Range

$18 - $20 USD

Ottieni la revisione del curriculum gratis e riservata.

o trascina qui il file.

Similar jobs

Offerte di lavoro simili che vale la pena confrontare

Material Handler - Forklift Driver (2nd Shift)
Material Handler - Forklift Driver (2nd Shift)

EMIT Technologies, Inc. • Sheridan (WY)

In loco
USD 28.000 - 33.000
Powder Coat Line Load Operator
Powder Coat Line Load Operator

EMIT Technologies, Inc. • Sheridan (WY)

In loco
USD 25.000 - 28.000
Line Shoot Top Coat - 2nd Shift
Line Shoot Top Coat - 2nd Shift

EMIT Technologies, Inc. • Sheridan (WY)

In loco
USD 28.000 - 37.000
Maintenance Technician
Maintenance Technician

EMIT Technologies, Inc. • Sheridan (WY)

In loco
USD 30.000 - 44.000
Powder Coat and Fabrication Lead (Second Shift)
Powder Coat and Fabrication Lead (Second Shift)

industrialelectricmanufacturing • Jacksonville (FL)

In loco
USD 70.000 - 90.000
Powder Coat and Fabrication Lead (Second Shift)
Powder Coat and Fabrication Lead (Second Shift)

Industrial Electric Mfg, Inc. • Jacksonville (FL)

In loco
USD 55.000 - 85.000
Benefits package
Growth opportunities
Paint Line Loader - 2nd shift
Paint Line Loader - 2nd shift

Celerity Staffing Solutions • Lake Hallie (WI)

In loco
USD 25.000 - 28.000
Overtime available
Shift differential $1/hour on second?
Material Handler EIMCo - 1st Shift
Material Handler EIMCo - 1st Shift

Steel Technologies LLC • Farley (IA)

In loco
USD 32.000 - 42.000
Medical, Dental, and Vision after 60 0
Competitive Wellness Program
Short-Term and Long-Term Disability
+2
Material Handler EIMCo - 1st Shift
Material Handler EIMCo - 1st Shift

EIMCo • Farley (IA)

In loco
USD 22.000 - 30.000
Medical, Dental, and Vision after 60 2
401(k) after 60 days with company-mand
Paid Time Off after 90 days
+3
Production Operator I
Production Operator I

MEC (Mayville Engineering Company, Inc.) • Beaver Dam (WI)

In loco
USD 30.000 - 40.000