Ironworker 1

Zachry Group

Port Sulphur (LA)

On-site

USD 34,000 - 48,000

Full time

41 hours ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Zachry Group is seeking Structural Ironworkers to construct iron/steel structures to specifications at project sites. You will read blueprints, identify tools, and follow safety protocols to ensure precision and quality.

Responsibilities include fabricating, bolting, and aligning structural members, hoisting equipment, and performing welds as required. A minimum of 4+ years' experience and the ability to work at heights over 300 ft are essential.

Qualifications

  • Must have 4+ years of experience as an Ironworker Helper or Structural Ironworker.
  • Must possess all Knowledge Skills and Abilities for positions (see below).
  • Must be able to meet all physical requirements.
  • Must be able to work at heights in excess of 300 ft.
  • Must have all required tools.
  • Must have reliable transportation.
  • Ability to read and understand IFC drawings.
  • Knowledge of all types of safe rigging practices (chokers, slings, etc.)

Responsibilities

  • Read blueprints and specification to determine the scope of work: locations, quantities, and sizes of materials required.
  • Identify all tools required for tasks.
  • Identify safety risks and the precautions required to eliminate those risks.
  • Fabricate equipment according to blueprints or instructions from supervisors.
  • Hoist equipment and tools into a location via bull rigging or crane.
  • Verify vertical and horizontal alignment of structural-steel members, using plumb bobs, laser equipment, transits, and/or levels.
  • Connect columns, beams, and girders with bolts, following blueprints and instructions from supervisors.
  • Bolt aligned structural-steel members in position for permanent riveting or bolting.
  • Pull, push, or pry iron/steel equipment into approximate positions for bolting into place.
  • Cut, bend, and weld iron/steel pieces, using metal shears, torches, and welding equipment.

Skills

Crew management
Read blueprints
Rigging knowledge
Welding basics
Safety/compliance
Equipment operation
Plan work
Industrial rigging
Troubleshooting

Tools

Skidmore
Torque wrench
Torque guns
Mag drills
Hogan drills
Cranes

Job description

Position Summary
Structural Ironworkers will construct iron/steel structures to specifications

Job Description
Position Summary
Structural Ironworkers will construct iron/steel structures to specifications

Responsibilities

Qualification Highlights

  • Must have 4+ years of experience as an Ironworker Helper or Structural Ironworker.
  • Must possess all Knowledge Skills and Abilities for positions (see below).
  • Must be able to meet all physical requirements.
  • Must be able to work at heights in excess of 300 ft.
  • Must have all required tools.
  • Must have reliable transportation.

Position Responsibilities

  • Read blueprints and specification to determine the scope of work: locations, quantities, and sizes of materials required.
  • Identify all tools required for tasks.
  • Identify safety risks and the precautions required to eliminate those risks.
  • Fabricate equipment according to blueprints or instructions from supervisors.
  • Hoist equipment and tools into a location via bull rigging or crane.
  • Verify vertical and horizontal alignment of structural-steel members, using plumb bobs, laser equipment, transits, and/or levels.
  • Connect columns, beams, and girders with bolts, following blueprints and instructions from supervisors.
  • Bolt aligned structural-steel members in position for permanent riveting or bolting.
  • Pull, push, or pry iron/steel equipment into approximate positions for bolting into place.
  • Cut, bend, and weld iron/steel pieces, using metal shears, torches, and welding equipment.

Required Knowledge, Skills, And Abilities

  • Ability to manage multiple crews.
  • Ability to plan out the workload for multiple crews and multiple processes.
  • Ability to take the lead in the erection of steel, fabrication, grid layout, rigging, etc.
  • Ability to perform all job duties of craft trade.
  • Ability to read and understand IFC drawings.
  • Ability to make hang list, read details off drawings, read all notes on drawings before erection, locate and understand ECN’s and holds on drawings.
  • Understand when to stop production work and when an RFI needs to be initiated.
  • Read and understand craft specs and cut sheets, craft spec procedures, and recommendations
  • Able to locate piece marks for correct views and know how to pick out different elevations
  • Being able to know the correct installation based on the orientation.
  • Knowledge of symbols based on legend
  • Knowledge of all types of safe rigging practices (chokers, slings, etc.)
  • Ability to dictate correct knots based on material
  • Know all aspects of connecting
  • Correct procedures of Bolting
  • Fabrication
  • Ability to read cut sheets
  • Layout from drawing
  • Cut material from layout and cut sheets
  • Torque vs. Tension, knowledge of Torque and Values
  • Turn of the nut method
  • Different types of indicators
  • Understand how to use a Skidmore
  • Plan work and execute
  • Ability to take drawings required material, line out helpers and execute work
  • Knowledge of specialty tools (torque wrench, Skidmore, torque guns, mag drills, hogan drills)
  • Basic knowledge of welding (machine set up, Mig, stick, gas, etc)
  • Knowledge of cutting torch, set up, dangers, usage, cleaning, types of tips and when to use the different types of tips
  • Knowledge of JLG’s man baskets, cranes
  • Basic maintenance (inspections)
  • Safe operations practices
  • Signaling of equipment (ERTS, NCCCO, NCCER)
  • Flagging of cranes, forklifts, man lifts
  • Tying knots for tag lines, etc
  • Math Skills
  • The footage, addition, subtraction, multiplication, division, fractions to perform all craft duties.

Preferred Additional Qualification

  • Current Zachry or Zachry ROF’ed employee.
  • Former experience working with Zachry Industrial, Inc.
  • Experience working as an Industrial Rigger.

Reports to Position

This position does not have any direct reports; however the position will work closely with and oversee helper and labor positions. The position will hold a positional and expertise authority of the helper and laborer positions.

Phical Requirements

  • Employee will be required to adhere to large amounts of standing, walking, bending, squatting, sitting and lifting.
  • Will talk and hear to communicate.
  • Will use arms and hands to signal, grab, hold, turn, push, and pull: objects, materials, controls and tools.
  • May be required to pick up, lift, carry and move up to 50lbs.
  • Will work at heights, climb ladders and stairways, and may occasionally work off of platforms/scaffolding using the appropriate fall protection requirements.
  • Must be able to work in all weather conditions (including heat, rain, cold and wind) while wearing appropriate PPE.
  • Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/spoggles, ear plugs, masks/respirators, hi-vis safety vests, leather gloves and leather steel-toed work boots.

Required Tools List To Be Provided.

ZACHRY is dedicated to providing a Safe and Drug-Free work environment and is an Equal Opportunity Employer.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

OG&E Muskogee
OG&E Muskogee

Zachry Group • Fort Gibson (OK)

On-site
USD 55,000 - 85,000
Safety gear provided
Rigger
Rigger

Zachry Group • Alvin (TX)

On-site
USD 45,000 - 75,000
Foreman Reinforced Ironworker
Foreman Reinforced Ironworker

Zachry Group • Roxboro (NC)

On-site
USD 70,000 - 90,000
Helper Rigger
Helper Rigger

Zachry Group • Roxboro (NC)

On-site
USD 30,000 - 47,000
Ironworker I
Ironworker I

Zachry Group • La Porte (TX)

On-site
USD 60,000 - 90,000
OG&E Sooner
OG&E Sooner

Zachry Group • Red Rock (OK)

On-site
USD 34,000 - 55,000
Evergy
Evergy

Zachry Group • Edmond (OK)

On-site
USD 60,000 - 90,000
Reinforced Ironworker 1
Reinforced Ironworker 1

Zachry Group • Gregory (TX)

On-site
USD 32,000 - 48,000
Carpenter I
Carpenter I

Numerical Advisory Solutions • Roxboro (NC)

On-site
USD 52,000 - 74,000
Rigger
Rigger

Zachry Group • Roxboro (NC)

On-site
USD 50,000 - 70,000
Safe and Drug-Free work environment
Equal Opportunity Employer