Instrumentation Technician

ACTalent

Concord (NC)

On-site

USD 39,000 - 55,000

Full time

10 hours ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Benefits offered by this job

Medical, dental & vision
401(k) Retirement Plan
Short/long-term disability
Paid time off

Job summary

Actalent is seeking a Lead Instrumentation Technician for a fully onsite role at a greenfield life sciences facility in Concord, NC. You will perform complex calibrations, PMs, and qualifications on process, utility, and laboratory instruments, ensuring compliance with GMP and client safety standards.

The role offers growth across levels, exposure to diverse equipment, and opportunities to lead 2nd shift calibration activities with initial training on 1st shift.

Qualifications

  • 2+ years calibration experience in a manufacturing environment.
  • Experience performing loop checks and calibrations for temperature, pressure, humidity, and pH.
  • Hands-on experience with manufacturing equipment and process instrumentation.
  • Experience with process equipment, utilities, and some laboratory instruments.
  • High attention to detail with ability to produce detailed calibration reports referencing standards, limits, and parameters.
  • Ability to interpret P&IDs and related documentation.
  • Basic GMP and life science regulation familiarity.
  • Understanding of calibration concepts across manufacturing, utilities, and lab environments.
  • Willingness to work onsite in a construction-heavy facility.
  • Supervisory/lead experience for 2nd shift roles.

Responsibilities

  • Perform scheduled calibrations, qualifications, and PMs on process, utility, manufacturing, and lab instruments with high accuracy.
  • Ensure calibrations comply with GMP and site procedures.
  • Conduct loop checks and calibrations for temperature, pressure, humidity, and pH.
  • Handle and maintain test equipment with traceability of standards.
  • Prepare detailed calibration reports referencing applicable standards and parameters.
  • Support quality system expectations with GMP principles and life science regulations.
  • Collaborate with client and internal teams to communicate status and solutions.
  • Guide less experienced technicians on 2nd shift where applicable.

Skills

Calibration experience
Loop checks calibrations
P&IDs interpretation
GMP awareness
Troubleshooting basics
Electrical safety
Onsite work in construction env
Lead/supervisory ability

Education

Two-year degree in Life Sciences/Engineering/Electronics
Military instrumentation training
Education/experience combinations acceptable

Tools

420 mA transmitters
Test equipment & standards
Lockout/Tagout procedures
P&IDs proficiency

Job description

Job Title: Lead Instrumentation Technician
Job Description

This onsite Calibration Technician role supports a large life sciences manufacturing facility in Concord, NC, performing complex calibrations and preventive maintenance in a highly regulated, construction-heavy environment. You will ensure critical process, utility, and laboratory instruments operate within defined standards, directly supporting the production of medications and life science products. The position offers opportunities from Level 2 through up, with clear paths for growth, exposure to greenfield facility builds, and the chance to work on a wide variety of equipment and calibration challenges.

Responsibilities
  • Perform scheduled calibrations, qualifications, and preventive maintenance (PMs) on process, utility, manufacturing, and selected laboratory instruments with high accuracy and within required timelines.
  • Complete all calibration activities in compliance with GxP requirements, following site-specific policies, procedures, and documentation standards.
  • Conduct loop checks and calibrations for temperature, pressure, humidity, and pH on a variety of equipment, ensuring all readings meet established limits and parameters.
  • Perform flow, conductivity, pH, mass, and dimensional calibrations with guidance, expanding capability across multiple measurement disciplines.
  • Handle, operate, and maintain company and client test equipment and standards, ensuring proper care, storage, and traceability of all instruments and tools.
  • Learn to troubleshoot instrumentation issues and perform basic repairs, while focusing the majority of time on scheduled calibrations and maintenance events.
  • Assess project safety risks proactively and ensure all work complies with client site safety requirements, including lockout/tagout and electrical safety practices.
  • Interpret P&IDs, instrumentation diagrams, and related documentation to plan and execute calibration and maintenance tasks accurately.
  • Prepare detailed, accurate calibration reports and records, referencing applicable standards, limits, and parameters, and maintain high quality and completeness in all documentation.
  • Support quality system expectations by applying basic GMP principles and life science industry regulations in daily work.
  • Collaborate with client personnel and internal team members, communicating clearly about work status, issues, and recommended solutions.
  • Develop and maintain strong working relationships with client teams, understanding their environments and requirements to propose and implement effective calibration solutions.
  • For more experienced levels, provide guidance and informal leadership to less experienced technicians, helping to coordinate work and uphold safety and quality standards.
  • For 2nd shift roles, train initially on 1st shift and then lead 2nd shift calibration activities, ensuring safe, efficient, and compliant execution of all tasks.
Essential Skills
  • At least 2 years of calibration experience in a manufacturing environment.
  • Experience performing loop checks and calibrations for temperature, pressure, humidity, and pH.
  • Hands-on experience with manufacturing equipment and process instrumentation.
  • Experience with process equipment, utilities, and some laboratory instruments.
  • High attention to detail, with the ability to produce very detailed and accurate calibration reports that reference standards, limits, and parameters.
  • Ability to interpret and work from P&IDs and related technical documentation.
  • Basic understanding and application of GMPs and life science industry regulations.
  • Basic understanding and application of instrument, equipment, and loop calibrations across manufacturing, utilities, and laboratory environments.
  • Expanded understanding of traceability, substitution of standards, and test accuracy and uncertainty ratios.
  • Expanded understanding of calibration concepts and requirements, including accuracy testing requirements.
  • Ability to make independent decisions within a defined scope of work and seek clarification when needed.
  • Self-driven mindset with the ability to work effectively with minimal supervision.
  • Excellent communication and problem-solving skills when working with clients and coworkers.
  • Thorough knowledge of electrical panels and associated safety practices.
  • Willingness to work fully onsite in a construction-heavy, greenfield facility environment.
  • For supervisory/2nd shift lead roles, prior supervisory or lead experience in a calibration or similar technical environment.
Additional Skills & Qualifications
  • 2+ years of calibration experience required; opportunities available up to 10 years of experience (Level 2, Level 3).
  • 12 years of pharmaceutical experience preferred, or equivalent experience from a highly regulated environment.
  • Military experience in instrumentation, metrology, or a related technical field is highly valued and translates well to this role.
  • Experience with 420 mA transmitters and loop calibrations is preferred.
  • Experience with signal generators, lockout/tagout procedures, and P&IDs is beneficial.
  • Experience in automotive, military, or HVAC technical roles that involved calibration or instrumentation work is considered relevant.
  • OSHA 10 or OSHA 30 certification is a strong plus; OSHA 10 training can be provided if not already held.
  • A two-year degree in Life Sciences, Engineering, Electronics, or another related technical field, or equivalent military training, combined with two years of applicable metrology, instrumentation, or calibration experience, is preferred.
  • Equivalent combinations of education and experience in metrology, instrumentation, or calibration are considered.
  • Quality system or pharmaceutical industry experience is preferred but not required.
  • Demonstrated ability to work safely in construction or industrial environments.
  • Interest in career growth through exposure to complex calibrations, greenfield facility builds, and site expansions.
Work Environment

This is a fully onsite role at a greenfield life sciences manufacturing facility in Concord, NC, currently characterized by a very heavy construction presence. The environment requires constant safety awareness, adherence to site safety rules, and comfort working around active construction activities. You will work with a broad range of process, utility, manufacturing, and laboratory instruments, including temperature, pressure, humidity, pH, flow, and other measurement systems, as well as 420 mA transmitters and associated electrical panels. The position includes 1st shift roles and 2nd shift roles, with 2nd shift team members initially training on 1st shift before transitioning to lead responsibilities on 2nd shift. OSHA safety practices, lockout/tagout procedures, and use of test and standards equipment are integral parts of daily work. Steel-toed boots are required on site, and reimbursement is available for this footwear. The role offers exposure to complex calibrations, greenfield builds, and site expansions, providing a dynamic environment with varied client processes rather than repetitive work on a single system.

Job Type & Location

This is a Contract to Hire position based out of Concord, NC.

Pay And Benefits

The pay range for this position is $28.00 - $40.00/hr.

Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors.

Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave)

Application Deadline

This position is anticipated to close on Nov 19, 2026.

Workplace Type

This is a fully onsite position in Concord,NC.

About Actalent

Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service.

The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

San Francisco Fair Chance Ordinance

Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector

It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI)

We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Calibration Specialist
Calibration Specialist

ACTalent • Raleigh (NC)

On-site
USD 39,000 - 58,000
Medical, dental & vision
401(k) Retirement Plan
Life Insurance
+5
Quality Assurance Associate
Quality Assurance Associate

ACTalent • Indianapolis (IN)

On-site
USD 41,000 - 58,000
Medical, dental & vision
401(k) plan
Life insurance
+5
Associate Scientist I - R&D
Associate Scientist I - R&D

ACTalent • Cincinnati (OH)

On-site
USD 39,000 - 55,000
Medical, dental & vision
401(k) Retirement Plan
Pre-tax and Roth post-tax
+6
Test Engineer
Test Engineer

ACTalent • Batesburg-Leesville (SC)

On-site
USD 55,000 - 69,000
Medical benefits
401(k) Retirement Plan
Life Insurance
+1
Quality Technician
Quality Technician

ACTalent • Bedford (MA)

On-site
USD 62,000 - 73,000
Medical, dental & vision
401(k) plan
Life Insurance
+2
Electrical Technician
Electrical Technician

ACTalent • Mebane (NC)

On-site
USD 34,000 - 62,000
Quality Assurance Specialist
Quality Assurance Specialist

ACTalent • Plainville (MA)

On-site
USD 39,000 - 41,000
Medical, dental & vision
401(k) Retirement Plan
PTO / Vacation
Chemist I
Chemist I

Able Too Work • Bedford (OH)

On-site
USD 30,000 - 42,000
Chemist I
Chemist I

Nativeamericantalent • Bedford (OH)

On-site
USD 30,000 - 42,000
Technologist
Technologist

ACTalent • Holyoke (MA)

On-site
USD 34,000 - 49,000