Instrumentation & Controls Specialist

valaratomics

Orangeville (UT)

On-site

USD 110,000 - 150,000

Full time

14 days+

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Valar Atomics is seeking an Instrumentation & Controls Specialist to lead field installation, calibration, configuration, and troubleshooting of plant instrumentation at our Orangeville, Utah pilot facility. This hands-on role centers on commissioning activities and supervising the I&C technician group.

You will coordinate loop checks, document test results, ensure regulatory compliance (NEC/IEC), and provide technical authority during operations.

Qualifications

  • Experience installing, calibrating, and commissioning field instrumentation.
  • Ability to supervise I&C technicians.
  • Knowledge of safety standards (NEC 500/505 or IEC 60079) and lockout/tagout practices.
  • Experience with hazardous area instrumentation and intrinsic safety requirements.

Responsibilities

  • Install, calibrate, configure, troubleshoot, and maintain field instrumentation (flow, pressure, temp, level).
  • Calibrate and service final control elements (valves, actuators, positioners).
  • Lead commissioning activities and coordinate resources; manage punch lists and turnover to operations.
  • Drive loop checks, device diagnostics, and end-to-end testing from sensor to final element.
  • Supervise I&C technicians; maintain training records and task qualifications.
  • Maintain calibration program and TRACEABILITY of tests to standards.

Skills

Instrumentation & Controls
Calibration
Commissioning
Field troubleshooting
Supervise technicians
HART protocol

Tools

HART communicators
Instrument asset management software
Calibration equipment (NIST-traceable)

Job description

About Valar Atomics

At Valar Atomics, we're redefining what's possible in energy. Our mission is to make clean, high-temperature nuclear power scalable-unlocking abundant energy for industry, hydrogen, and next-generation manufacturing. We are a team of builders, engineers, and operators who believe nuclear energy should be fast to deploy, factory-made, and built for the real world. Our first pilot plant in Orangeville, Utah will demonstrate how advanced nuclear systems and fuel fabrication can power the future. Joining Valar Atomics means becoming part of a company where autonomy, ownership, and impact exist at every level.

The Team

You will be joining Valar Atomics' I&C Engineering team within the Fuel Manufacturing group. The I&C Specialist is the bridge between engineering design and working plant hardware, leading commissioning, owning calibration and field troubleshooting, and supervising the technicians who install and maintain the instrumentation. You will work alongside I&C Hardware and Software Engineers, process and mechanical engineers, operations, and nuclear safety in an environment where field execution quality directly supports production reliability and nuclear safety. The team values hands‑on expertise, disciplined documentation, and a safety‑first culture.

The Role

Valar Atomics is seeking an Instrumentation & Controls Specialist to serve as the site's hands‑on expert in instrumentation and control hardware for nuclear fuel manufacturing facilities. This is a field‑focused role centered on instrument installation, calibration, configuration, and troubleshooting, with primary responsibility for planning, leading, and executing commissioning activities and for supervising the I&C technician group. The position suits an experienced technical specialist who wants ownership of field execution without moving into a design engineering role.

Key Responsibilities
  • Install, calibrate, configure, troubleshoot, and maintain field instrumentation including flow, pressure, differential pressure, temperature, level, and analytical devices, using manufacturer procedures and site standards.
  • Calibrate and maintain final control elements including control valves, actuators, positioners, and regulators; perform bench and in‑situ calibration, stroke and response testing, packing and seat maintenance, and valve signature analysis.
  • Plan, lead, and execute commissioning activities including commissioning schedule development and sequencing, preparation of loop check and functional test packages, coordination of craft and vendor resources, punch list management, and system turnover to operations.
  • Execute and document loop checks, point‑to‑point continuity checks, calibration verification, and end‑to‑end interlock testing from sensor through final element; drive punch list items to closure.
  • Supervise the I&C technician group including daily work assignment, verification of task qualification and training records, on‑the‑job training and sign‑off, and performance input to I&C leadership.
  • Own execution of the instrument calibration program including calibration scheduling and recall, management of standards and test equipment, traceability to NIST‑referenced standards, and integrity of calibration records.
  • Configure and troubleshoot smart field devices using HART communicators and instrument asset management software; manage device descriptor files, ranging, damping, and diagnostic alarm configuration.
  • Terminate and troubleshoot field wiring, panel terminations, and I/O connections; diagnose grounding, shielding, and noise‑induced signal problems; verify intrinsic safety installations against entity parameters.
  • Install and commission instrumentation in classified hazardous areas in accordance with NEC Article 500/505 or IEC 60079 and applicable installation and work permits.
  • Execute safety instrumented system field work including proof testing and documentation, bypass control, and safety device replacement under approved procedures.
  • Support control loop tuning and plant startup, working with I&C Engineering to resolve measurement quality, final element response, and loop performance issues.
  • Red‑line and maintain field documentation including loop diagrams, hook‑up drawings, instrument index entries, panel and wiring drawings, and as‑built mark‑ups; route changes through the engineering document control process.
  • Serve as the site technical authority for instrument troubleshooting during operations; respond to plant callouts, perform root cause investigation, and implement and document corrective actions.
  • Manage instrument spares and consumables including criticality‑based stocking levels, receipt inspection, and vendor coordination for repairs and returns.
  • Write and review I&C work packages and job hazard analyses; enforce lockout/tagout, hot work, confined space, radiological work practice, and foreign material exclusion requirements for all I&C field work.
  • Provide field feedback to I&C Enginee
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Staff Instrumentation & Controls Engineer - Hardware
Staff Instrumentation & Controls Engineer - Hardware

valaratomics • Orangeville (UT)

On-site
USD 120,000 - 190,000
Senior Instrumentation & Controls Engineer - Hardware
Senior Instrumentation & Controls Engineer - Hardware

valaratomics • Orangeville (UT)

On-site
USD 90,000 - 130,000
Instrumentation & Controls Specialist
Instrumentation & Controls Specialist

Valar Atomics Inc. • Castle Dale (UT)

On-site
USD 90,000 - 140,000
Equity ownership
Unlimited PTO
Free daily lunch & dinner onsite
+1
Instrumentation & Controls Specialist
Instrumentation & Controls Specialist

Valar Atomics Inc. • Orangeville (UT)

On-site
USD 120,000 - 170,000
Equity ownership in a rapidly growing
Unlimited PTO
Free daily lunch and dinner provided
+1
Instrumentation & Controls Specialist
Instrumentation & Controls Specialist

Valar Atomics Inc. • Utah

On-site
USD 120,000 - 165,000
Equity ownership
Unlimited PTO
Free daily lunch
+3
Instrumentation & Controls Specialist
Instrumentation & Controls Specialist

Blackwing • Utah

On-site
USD 120,000 - 180,000
Competitive base salary
Equity ownership
Medical benefits
+3
Instrumentation & Controls Specialist
Instrumentation & Controls Specialist

Valar Atomics Inc. • Town of Orangeville (NY)

On-site
USD 120,000 - 180,000
Equity ownership
Comprehensive medical benefits
Unlimited PTO
+1
Staff Instrumentation and Controls Engineer
Staff Instrumentation and Controls Engineer

valaratomics • Torrance (CA)

On-site
USD 120,000 - 190,000
Staff Instrumentation & Controls Engineer - Nuclear
Staff Instrumentation & Controls Engineer - Nuclear

valaratomics • Torrance (CA)

On-site
USD 180,000 - 240,000
Senior Nuclear I&C Engineer - Hardware
Senior Nuclear I&C Engineer - Hardware

valaratomics • Torrance (CA)

On-site
USD 140,000 - 210,000