Instrument Fitter # in Conyers, GA

Graywolf Integrated Construction; Conyers (GA); On-site; USD 60,000 - 80,000; Full time

Job summary

GrayWolf is seeking Instrument Fitters at our Conyers, GA project site to install, assemble, and maintain instrumentation systems in process plants and facilities. You will read loop sheets and drawings, bend tubing, install sensors, and ensure compliance with GMP and OSHA on complex systems.

Qualified candidates have 4 years of instrument fitting experience, own a locking toolbox, and can pass pre-hire requirements.

Qualifications

• Four (4) years instrument fitting experience in industrial construction.
• Locking toolbox and tools necessary to perform the job.
• Must be able to successfully complete all required pre-hire requirements.

Responsibilities

• Install, assemble, tubing, mounting, and maintain instrumentation systems in process plants and facilities.
• Read loop sheets, P&IDs, isometrics, and construction drawings.
• Install instruments on process and clean utility systems; perform tube bending in stainless steel.
• Follow GMP, cleanroom procedures, safety rules and site OSHA regulations.
• Coordinate with electricians, controls technicians, and commissioning teams.
• Fabricate and assemble tubing, fittings, hoses, and fluid systems.
• Maintain installation records and support turnover and validation activities.

Skills

Reading drawings

Instrumentation

Safety compliance

Tools

Tubing cutters

Flaring tools

Swaging tools

Threading equipment

Pipe wrenches

Adjustable wrenches

Open-end and box-end wrench sets

Socket and ratchet sets

Screwdrivers

Allen/Hex key sets

Side cutters/diagonal cutters

Wire strippers and crimpers

Hammer and mallet

Tape measure

Level

Utility knife

Digital multimeter

Clamp meter

Continuity tester

Megger/insulation resistance tester

Loop calibrator

Process calibrator

Signal generator

Pressure calibrator/test pump

Temperature calibrator

Job description

Instrument Fitter # in Conyers, GA

10 Field-Operations -Non GWICC Full Time Conyers, GA, US

GrayWolf is seeking Instrument Fitters at our Conyers, GA project site

GrayWolf is a heavy industrial/commercial construction contractor that provides end-to-end solutions from design, fabrication, construction, and facility management with a footprint that is nationwide. With more than 45-years of experience in the industry, we have strong leadership and support teams who understand field servant leadership is the key to our success. We are continually BUILDING new talent while developing our current talent. As our assignments vary in duration and locations, we provide a safe and ethical environment and offer a competitive wage and benefit program. We strive to be the best contractor by demonstrating a culture of Safety, Quality and Performance to deliver the best completed projects to our customers.

Summary:

The Instrument Fitter is responsible for the installation, assembly, tubing, mounting, and maintenance of industrial instrumentation systems used in process plants, power generation facilities, manufacturing plants, refineries, and construction projects. This position works closely with Instrument Technicians, Electricians, and Operations personnel to ensure instrumentation systems are installed safely, accurately, and in accordance with project specifications and industry standards.

• Read and work from loop sheets, P&IDs, isometrics, and construction drawings.
• Install pressure, temperature, flow, level, and analytical instruments on process and clean utility systems, such as purified water, WFI, clean steam, and compressed air.
• Perform single and group tube bending using hand, mechanical, and hydraulic benders, mostly in stainless steel tubing.
• Install instrument stands, supports, air headers, tube tray, threaded pipe, and steam tracing.
• Make up compression fittings, manifolds, and high-pressure valves to spec, and assist with leak and pressure testing.
• Follow GMP, cleanroom gowning, and contamination-control procedures in controlled areas.
• Keep accurate installation records and support turnover, inspection, and validation activities.
• Coordinate with electricians, controls technicians, and commissioning and qualification teams through startup.
• Follow all site safety rules and OSHA regulations.
• Perform other duties as assigned.
• Fabricate and assemble stainless steel tubing, fittings, hoses, and custom fluid systems.
• Bend and install tubing using precision tools and established procedures.
• Working knowledge of high-pressure valves, fittings, and pipe and tubing
• specifications.
• Follow oral and written directions.
• Work within company policies (including Safety and Human Resources policies), client policy and OSHA safety requirements.
• Perform other duties as assigned by the supervisor as needed.
• Other duties by trade and assigned by supervisor.

Qualifications:

• Four (4) years instrument fitting experience in industrial construction.
• You must have locking toolbox and tools necessary to perform the job.
• Must be able to successfully complete all required pre-hire requirements.

Physical/Site Requirements:

• Lift and carry heavy items weighing up to 45 pounds.
• Move in and around confined and cluttered places, and uneven areas. Full range of motion and flexibility consistent with age.
• Work up to a 12-hour shift in varying temperature extremes and other outside conditions.
• Climb and maintain balance on steel framework, stairs, ladders, and scaffolds.
• PPE footwear/prescription safety glasses or eye shields required.

TOOL REQUIREMENTS (minimum)

• Tubing cutters
• Flaring tools
• Swaging tools
• Threading equipment
• Pipe wrenches
• Adjustable wrenches
• Open-end and box-end wrench sets
• Socket and ratchet sets
• Screwdrivers (flathead and Phillips)
• Allen/Hex key sets
• Side cutters/diagonal cutters
• Wire strippers and crimpers
• Hammer and mallet
• Tape measure
• Level
• Utility knife
• Digital multimeter
• Clamp meter
• Continuity tester
• Megger/insulation resistance tester
• Loop calibrator (4-20mA)
• Process calibrator
• Signal generator
• Pressure calibrator/test pump
• Temperature calibrator

Graywolf Integrated Construction Company is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law.