Inspector - Track

Colliers Engineering & Design; Seattle (WA); On-site; USD 90,000 - 160,000; Full time

Benefits offered by this job

Healthcare benefits

PTO and holidays

401(k) retirement plan with match

FSA/HSA options

Employee Assistance Program (EAP)

Job summary

Colliers Consulting Services, now part of Colliers Engineering & Design, seeks an Inspector for Trackwork to perform field inspections for a light rail extension project in Seattle. You will verify conformance to contract documents, submittals, RFIs, and applicable codes and standards.

Responsibilities include inspecting alignment, gauge, superelevation, rail fastening, and turnout installations, documenting daily activities with IDRs, recording field quantities, and supporting punch lists and

Qualifications

• High school diploma or equivalent required; technical training or a degree in civil engineering or construction technology preferred.
• Approximately 5+ years of inspection or construction experience on trackwork for light rail, heavy rail, or other rail systems.
• Working knowledge of track construction methods, track geometry, and special trackwork installation.
• Familiarity with AREMA standards and transit agency track design criteria preferred.
• OSHA 30-Hour Construction certification and rail worker protection training preferred.
• Valid driver's license.
• Must be able to work on-site in Seattle full-time during construction, including night and weekend work as required.
• Ability to read, write and understand English for purposes of comprehending written job-related communications and verbal instructions and interactions.

Responsibilities

• Understands and verifies Contractor conformance to all contract documents, submittals, RFIs, and applicable codes and design standards for trackwork.
• Inspects on-site trackwork activities according to the approved Staffing Plan, and prioritizes inspection coverage in coordination with the Authority's construction management representatives.
• Inspects and documents track alignment, gauge, cross level, superelevation, rail fastening, and rail welding activities.
• Inspects turnout and crossover assembly and installation for compliance with tolerances.
• Inspects rail, special trackwork, ties, fasteners, and other track material deliveries for conformance, storage, and protection.
• Observes and documents quality control testing performed by the Contractor.
• Monitors contractor operations for compliance with OSHA regulations and Authority safety requirements, including work near operating rail, and reports unsafe conditions.
• Completes Inspector Daily Reports (IDRs) documenting work performed, labor, equipment, materials, and site conditions.
• Records field quantities in support of progress payments.
• Communicates non-conforming work to the Resident Engineer and quality management staff and documents it in the IDR.
• Takes and logs construction photos and supports as-built redline documentation.
• Supports punch list, track acceptance, and closeout inspections.

Skills

Trackwork inspection

On-site construction

English communication

Education

High school diploma or equivalent

Civil engineering or construction technology degree preferred

Tools

AREMA standards

Transit design criteria

Job description

Overview

Ramos CS, now part of Colliers Engineering & Design, is an engineering, program, and construction management firm providing quality transit, transportation, and infrastructure consulting services on public projects across the Western United States. We focus our solutions on mobility-related projects that serve the needs of our communities within the municipal, transit, transportation, airport, and port sectors.

With a staff of diversified, licensed professionals, our philosophy stems from the idea that successful project execution starts with people.

We are seeking an Inspector for Trackwork to perform field inspection work as Owner's Representative on a light rail extension program's trackwork and systems construction contract. The Inspector verifies that the Contractor's trackwork and special trackwork installation, including turnouts and crossovers, direct fixation, embedded, and ballasted track, conforms to the contract documents, approved submittals, RFIs, and all applicable codes and design standards. The Inspector works under the direction of the Resident Engineer and the Construction Engineer (Track), documents the Contractor's daily activities, and reports non-conforming work for resolution.

Responsibilities

• Understands and verifies Contractor conformance to all contract documents, submittals, RFIs, and applicable codes and design standards for trackwork.


• Inspects on-site trackwork activities according to the approved Staffing Plan, and prioritizes inspection coverage in coordination with the Authority's construction management representatives.


• Inspects and documents track alignment, gauge, cross level, superelevation, rail fastening, and rail welding activities.


• Inspects turnout and crossover assembly and installation for compliance with tolerances.


• Inspects rail, special trackwork, ties, fasteners, and other track material deliveries for conformance, storage, and protection.


• Observes and documents quality control testing performed by the Contractor.


• Monitors contractor operations for compliance with OSHA regulations and Authority safety requirements, including work near operating rail, and reports unsafe conditions.


• Completes Inspector Daily Reports (IDRs) documenting work performed, labor, equipment, materials, and site conditions.


• Records field quantities in support of progress payments.


• Communicates non-conforming work to the Resident Engineer and quality management staff and documents it in the IDR.


• Takes and logs construction photos and supports as-built redline documentation.


• Supports punch list, track acceptance, and closeout inspections.

Qualifications

• High school diploma or equivalent required; technical training or a degree in civil engineering or construction technology preferred.


• Approximately 5+ years of inspection or construction experience on trackwork for light rail, heavy rail, or other rail systems.


• Working knowledge of track construction methods, track geometry, and special trackwork installation.


• Familiarity with AREMA standards and transit agency track design criteria preferred.


• OSHA 30-Hour Construction certification and rail worker protection training preferred.


• Valid driver's license.


• Must be able to work on-site in Seattle full-time during construction, including night and weekend work as required.


• Ability to read, write and understand English for purposes of comprehending written job-related communications and verbal instructions and interactions.

Compensation: $90,000 to $160,000 per year (depending on qualifications)

What We Offer

Ramos Consulting Services, now a part of Colliers Engineering & Design, offers competitive benefits that support our employees in their life and career. This position is eligible for company benefits including but not limited to:

• Employer-Provided Healthcare: 100% employer-paid medical, dental, and vision insurance for employee base plans. We also provide a 40% employer contribution toward dependent or family coverage plans.


• Paid Time Off: 120 hours of combined PTO and Sick Time annually, in addition to paid holidays.


• Retirement Planning: Participation in a 401(k) retirement plan with a generous company match of 50% on the first 6% of employee contributions.


• Flexible Spending Accounts: Pre-tax FSA/HSA options for medical, dental, and dependent care expenses to help manage out-of-pocket costs.


• Employee Wellness & Support: 100% employer-paid Employee Assistance Program (EAP) providing 24/7 confidential support for work-life balance, financial wellness, and emotional well-being.


• National Resources & Career Growth: As part of the Colliers Engineering & Design national platform, employees have access to expanded technical resources, mentorship, and diverse career development opportunities across the Western United States and beyond.