Inspector Tech

Parker

Hauppauge (NY)

On-site

USD 43,000 - 64,000

Full time

10 days ago

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Benefits offered by this job

401(k) Plan with company matching
Tuition reimbursement
Paid Time Off

Job summary

Parker Hannifin in Hauppauge, NY is seeking an Inspector Tech to perform complex inspection, calibration and nondestructive testing under minimal supervision. You will use precision measuring equipment, interpret blueprints, and document results as part of a quality-focused team.

The role requires at least five years of related inspection experience, familiarity with MIL-STD procedures, and the ability to lift up to 50 lbs. Competitive hourly pay ranges from $31 to $46.60 per hour.

Qualifications

  • Five years related inspection experience or demonstrated ability to perform described responsibilities.
  • May be required to be certified as Level II NDT (MIL-STD) and PES1‑29.
  • Proficient in reading and interpreting blueprints, specifications and internal drawings.
  • Knowledge of shop mathematics including trigonometry and measurement instrumentation.
  • May be required to lift up to 50 lbs.
  • Strong verbal and written communication skills; team-oriented.

Responsibilities

  • Maintain accurate acceptance/rejection records and certifications per specifications.
  • Determine acceptance after inspection/calibration of parts; document results.
  • Perform inspections on complex parts with diverse measuring equipment.
  • Develop inspection set-ups for samples, forgings, castings and tooling layouts.
  • Interpret drawings and tolerances to determine acceptance; support supervision.
  • Operate and calibrate inspection equipment; support training of personnel.

Skills

Inspection experience
Blueprint reading
Verbal and written communication
Team player

Education

Nondestructive Testing Certification Level II (preferred)

Tools

CMM equipment
X-ray equipment
Calipers and gauges

Job description

Conditions of Employment

This position is subject to meeting U.S. export compliance and/or U.S. Government contracting citizenship eligibility requirements.

Parker Hannifin

Parker Hannifin is a Fortune 250 global leader in motion and control technologies. For more than a century, we’ve enabled engineering breakthroughs that make energy cleaner, transportation safer, medical treatments more effective, and manufacturing more efficient.

With empowered team members in more than 40 countries, Parker serves customers across aerospace & defense, energy, HVAC & refrigeration, in-plant & industrial equipment, off-highway and transportation.

Our scale is global, but our purpose is personal. We enable breakthroughs that improve lives, strengthen communities and create a brighter future.

Our Purpose — Enabling Engineering Breakthroughs that Lead to a Better Tomorrow — comes to life through our people-first culture where teamwork drives performance, inclusion fuels innovation and growth is encouraged. This environment fosters collaboration and empowers team members from engineering and manufacturing to finance, supply chain, human resources, information technology and beyond.

By combining deep expertise with an entrepreneurial spirit, we help customers succeed in markets that demand performance, reliability, and sustainability.

As we look to the future, Parker is advancing initiatives in energy efficiency and sustainability while developing the next generation of talent and leaders to engineer a better tomorrow.

Inspector Tech

Salary Grade: 4 Employee Type: Hourly

Position Summary

With minimum guidance in a team environment, using independent judgement to determine quality and usability, responsible for a wide variety of complex inspection requirements.

Responsibilities
  • Responsibilities may include some or all of the following:
  • Maintain accurate and up‐to‐date acceptance and rejection records and/or certifications systems as required by the applicable specifications.
  • Determine acceptance or rejection after inspection and/or calibration of parts, tools, instruments or x‐ray film. Identify defective conditions and test failures and prepare all appropriate documentation and/or calibration history.
INSPECTION
  • Perform inspection on complex parts using a wide variety of measuring and test equipment.
  • Adapt and develop complex inspection set‐ups to check sample parts, forgings and castings. Check tool and jig layouts.
  • Perform first article and envelope inspections, source inspections, and/or complex surface plate set‐ups.
  • Interpret specifications, charts, manuals and other data to arrive at acceptance or rejection. Recommend changes to supervision. Use mathematics to convert blueprint dimension and tolerances. Work within the guidelines of drawings, schematics, blueprints, route sheets, travelers, quality directives, technical engineering specifications, customer's requirements and military standards.
  • Layout all component part characteristics onto rough or semi‐machined castings, forgings and machine parts to maintain control of machining cycle during manufacturing.
  • Make own gaging set‑ups on surface plate using block, parallels, clamps, sine plates and V‑blocks to take readings with precision measuring instruments.
  • Adapt inspection equipment to check standard, non‑standard and special products.
  • Investigate cause of customer return failures. Perform inspections to applicable specifications within assembly, test and shipping departments. Assist customer/government source inspectors as necessary.
CALIBRATION
  • Perform calibration on complex multi‑function electronic measuring and test equipment.
  • Set‑up calibration test conditions having various circuit requirements interpreting calibration procedures, specifications, manufacturer's instructions, or related documents.
  • Ability to interpret drawings and electronic schematics.
  • Document and evaluate historical data to determine calibration intervals. Diagnose and calibrate newly acquired complex electronic equipment.
NONDESTRUCTIVE TEST
  • Perform daily, weekly and monthly equipment and material checks. Perform pre‑inspection and post‑inspection cleaning.
  • Set‑up equipment and conduct tests.
  • Interpret, evaluate and document inspection results in accordance with approved procedures.
  • Perform complete inspections in accordance with applicable specifications, standards and other contractual documents.
  • Operate X‑ray equipment and film processor.
  • Select the method and technique to be used for a specific inspection. Prepare and verify the adequacy of inspection procedures.
  • Approve procedures, specifications, standards and other written documents that control the inspection. Conduct or direct the training and examination of Level I, II and III personnel.
  • Observe all prescribed safety rules and regulations and maintain a FOD free work area. Perform other related responsibilities.
Job Requirements
  • Five years related inspection experience or demonstrated ability to perform described responsibilities. Knowledge of applicable military standards or specifications.
  • May be required to be certified as a Level II Nondestructive Test Inspector in at least three discipline

or as a Level III Examiner in at least one discipline. Certification must be in accordance with MIL‑STD‑410 and PES1‑29.

  • Required experience in CMM operations, background in dimensioning and tolerancing per ANSI Y 14.5.
  • Proficient in reading and interpreting blueprints, customer's specifications and internal drawings and procedures.
  • Thorough knowledge of machine shop mathematics including trigonometry. Knowledge of electro‑hydraulic servo systems and the computer IEEE systems. Personal hand tools may be required.
  • May be required to lift up to 50 lbs.
  • Must demonstrate effective verbal, written and communication skills.
  • Ability to work effectively with others and be a participative team player.
Competitive Compensation
Pay, Benefits, Work Schedule
  • Pay Range: $31/hr to $46.6/hr
  • Participation in Annual Incentive Program
Benefit & Retirement Plans

Parker Offers Competitive Benefit Programs, Including

  • Comprehensive coverage for medical, prescription drugs, dental, vision, voluntary optional life, accident insurance, hospital indemnity insurance and critical illness insurance with competitive premium cost.
  • 401(k) Plan with company matching contributions at 100% of the first 5% of pay.
  • Company provided defined‑contribution retirement plan with annual contribution equal to 3% of pay.
  • Career development and tuition reimbursement.
  • Other benefits including paid parental leave, short and long‑term disability programs, adoption assistance, a Care.com membership and financial planning assistance are provided at no cost to you.
  • Supplemental benefit programs including identity protection, legal protection, and pet wellness are available at competitive rates.
  • Paid Time Off and Company‑Paid Holidays.
Additional Comments

The essential functions have been provided as example of the type of work performed by employees assigned to this job classification. The company reserves the right to modify the work assignments and/or to make reasonable accommodations so that qualified employees can perform the essential functions. The job description is not intended to be an inclusive list of duties and responsibilities. It is intended to describe the general nature of the position.

Parker is an Equal Opportunity and Affirmative Action Employer. Parker is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job related reasons regardless of race, ethnicity, color, religion, sex, sexual orientation, age, national origin, disability, gender identity, genetic information, veteran status, or any other status protected by law. However, U.S. Citizenship, Permanent Residency or other appropriate status is required for certain positions, in accord with U.S. import & export regulations.

(“Minority / Female / Disability / Veteran / VEVRAA Federal Contractor”)

If you would like more information about Equal Employment Opportunity as an applicant under the law, please go to Employees & Job Applicants | U.S. Equal Employment Opportunity Commission

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Inspector Tech
Inspector Tech

Parker Hannifin Corporation • Town of Smithtown (NY)

On-site
USD 43,000 - 64,000
401(k) Plan with company matching
Tuition reimbursement
Paid Time Off
Inspector Tech
Inspector Tech

Parker • Naples (FL)

On-site
USD 55,000 - 85,000
Medical coverage
401(k) Plan with company match
Tuition reimbursement
+1
Inspector A - experienced (Aerospace)
Inspector A - experienced (Aerospace)

Parker • Elyria (OH)

On-site
USD 55,000 - 85,000
Inspector A - experienced (Aerospace)
Inspector A - experienced (Aerospace)

Parker • Elyria (OH)

On-site
USD 55,000 - 75,000
Inspector Tech
Inspector Tech

Parker Hannifin Corporation • Naples (FL)

On-site
USD 70,000 - 90,000
Medical coverage
Dental and vision
Paid time off
+1
Quality Inspector
Quality Inspector

Parker Hannifin • Ogden (UT)

On-site
USD 52,000 - 72,000
Quality Inspector
Quality Inspector

Parker • Camarillo (CA)

On-site
USD 48,000 - 75,000
Medical insurance
401(k) plan
Paid time off
Quality Inspector
Quality Inspector

Parker • Camarillo (CA)

On-site
USD 31,000 - 50,000
Competitive benefits
Annual incentive program
Paid time off
Quality Inspector Sr
Quality Inspector Sr

Parker • Jacksonville (FL)

On-site
USD 60,000 - 80,000
Annual Incentive Program
Medical, dental, vision coverage
401(k) with company matching
+1
Quality Inspector
Quality Inspector

Parker • Houston (TX)

On-site
USD 42,000 - 64,000