Inspector, Processing - Aerospace

Accurus Aerospace Corporation; Tulsa (OK); On-site; USD 40,000 - 60,000; Full time

Benefits offered by this job

Benefits after 30 days

Job summary

Accurus Aerospace Tulsa is seeking a Quality Control Inspector for the Processing department to inspect machined aerospace parts after painting or processing. You will use precision instruments and document findings per GD&T and work instructions.

This role requires a high school diploma or GED, at least 2 years as a CMM operator, and preferred associate degree; ITAR/U.S. person status may apply; on-site in Tulsa.

Qualifications

• High school diploma or GED required.
• Associate degree or vocational training preferred.
• Minimum 2 years as a CMM operator in machining; aerospace experience preferred.

Responsibilities

• Determine and use inspection methods and instruments for in-process and final inspections.
• May operate CMM and inspect complex fixtures.
• Interpret drawings with GD&T to identify inspection requirements.
• Generate inspection reports and initiate nonconformance records.
• Communicate with internal/external personnel to address non-conformities.
• Regular on-site attendance.

Skills

Blueprint reading

Mathematical aptitude

Precision measurement

Nonconforming product knowledge

AS9100/FAA standards

Problem solving

English communication

MS Office/ERP experience

Education

High School Diploma or GED

Associate degree or vocational training preferred

Tools

CMM

Micrometers

Height gauges

Gauges

Job description

Quality Control Inspector, Processing - Aerospace

Accurus Aerospace Tulsa, 12716 East Pine Street, Tulsa, Oklahoma, United States of America

Job Description

Posted Tuesday, February 17, 2026 at 7:00 AM

Inspectors are key personnel in the Accurus Quality Department, and their duties are integral to our overall quality management system and customer satisfaction. These employees perform inspections on newly received goods and work-in-process, and are responsible for final inspections of machined aerospace parts and assemblies to ensure compliance with engineering requirements and work instructions. Inspectors are required to document specific information regarding approvals and non-conforming parts and may be involved in problem-solving to identify rework requirements. Additionally, inspectors may provide quality and/or manufacturing process training for manufacturing personnel.

Processing inspectors use precision measurement tools (mics, calipers, gauges, etc.) to perform inspections on parts after painting or chemical processing has been completed.

This role is identified as requiring ITAR (International Traffic in Arms Regulations) compliance; therefore, qualified candidates must meet the definition of a U.S. Person (per EAR Part 772 and ITAR 120.15):

• An individual who is granted U.S. citizenship, or
• An individual who is granted U.S. permanent residence (i.e., a "Green Card" holder), or
• An individual who is granted status as a "protected person"

Essential Functions

To accomplish this job, an individual must be able to perform each essential function satisfactorily. Reasonable accommodations may be made to help enable qualified individuals with disabilities to perform the essential functions.

• Determines and utilizes appropriate inspection methods and instruments (micrometers, height gauges, air gauges, radius gauges, calipers, CMM, etc.) to complete in-process and final inspection of machined aerospace parts and assemblies, including simple to moderate layouts and setups on a surface plate
• May operate CMM
• Inspects complex machined fixtures and parts using advanced measuring and layout instruments and equipment
• Participates in design reviews on cross-functional teams to ensure that conformance to specifications, inspectability, reliability, and quality system objectives are met; provides technical support for manufacturing operations to ensure part quality
• May assist engineering with the qualification and validation of new or changed tooling or parts
• Interprets drawings featuring Geometric Dimensioning & Tolerance (GD&T) to identify product inspection requirements
• Generates inspection reports; analyzes inspection reports to determine adherence to drawings, specifications, and processing procedures; Initiates nonconformance records and disposition of parts not meeting requirements
• Prepare detailed inspection documentation, such as written descriptions of inspection results, including deviations from engineering specifications
• Communicates effectively and professionally with internal and external personnel to identify root causes, troubleshoot and address errors and trends, and negotiate the resolution of non-conforming parts and necessary rework or re-inspection
• Performs other duties as required
• Regular attendance on-site at the workplace is required

Required Education and Work Experience

• A high School Diploma or GED equivalent
• An associate degree or similar post-secondary or vocational training in machining or a similar program is preferred
• A minimum of two (2) years of experience as a CMM Operator in a machining environment; aerospace industry experience is preferred

Other Required Skills and Abilities

• Demonstrated accuracy in reading and interpreting blueprints, planning, and engineering documents, quality standards, customer specifications, manufacturing control plans, including PCM, and other technical design standards
• Advanced mathematical skills (add, subtract, multiply and divide using fractions and decimal equivalents), familiar with geometric tolerance
• Experience in accurately reading precision measuring instrumentation, including mics, calipers, height gauges, tape measures, and other similar devices
• Understanding of nonconforming product
• Knowledge of customer and industry standards and quality system requirements, including AS9100, and FAA requirements
• Knowledge of problem-solving techniques (i.e., Statistical Quality Control/Statistical Process-Control, etc.) is preferred
• Ability to communicate effectively both verbally and in writing (English)
• Basic skills using Microsoft Office applications, including Outlook, Excel, and Word; ERP experience is advantageous

Physical Demands and Work Environment

To perform the essential functions of the role, employees must be able to perform the following activities with or without reasonable accommodations:

• Regularly stand and walk throughout the facility, including all buildings and the manufacturing areas
• Periodically lift, carry (short distances), and push/pull up to 100 pounds using cranes or other material handling equipment and/or peer assistance
• Regularly climb steps, stairs, or ladders
• Occasionally bend, crawl, stoop, squat, or kneel
• Constantly communicate verbally and in writing (English) using a phone, texts, or other messaging
• Visual acuity to accurately read mics, calipers, or other precision measuring instruments; accurately distinguish colors
• Use hands and fingers to operate computer keyboards, measurement instruments, and manually examine parts
• Visual ability to read precise measurements and part markings

Working Conditions

Work is performed in a manufacturing shop environment where working conditions may vary significantly; the employee may be exposed to:

• Extreme temperatures (occasionally)
• Hazardous equipment, including forklifts, hand tools, cranes or other lifting devices, and other equipment used in a machine shop environment (continually)

The use of PPE, including hearing protection, eye and hand protection, and safety footwear is required.

Accurus offers a comprehensive employee benefit package upon completion of 30 days of employment. For full details, please visit the benefits section of our website.

All job offers are contingentupon successfully completing a drug screen and criminal background screening. Certain positions may require a Motor Vehicle Report (MVR), a credit report, and/or a medical physical examination.

Accurus Aerospace Tulsa, 12716 East Pine Street, Tulsa, Oklahoma, United States of America