Industrial Painter - Weekend Shift

Harvard Integrations LP

Tea (SD)

Presencial

USD 42 000 - 68 000

Tempo integral

Há 3 dias
Torna-te num dos primeiros candidatos

Uma candidatura completa num minuto

Currículo e carta de apresentação personalizados, prontos a enviar.

Ultrapassa os filtros ATS

Resumo da oferta

Harvard Integrations LP in Tea, SD, is seeking an experienced industrial painter to prepare and paint custom metal buildings according to specifications. You will mix paints, operate spray guns, and ensure high-quality finishes for interiors and exteriors.

The role requires adherence to safety regulations, ability to work on ladders, stand for long periods, and lift up to 50 lbs. Three years of painting experience preferred, including attention to detail and teamwork.

Qualificações

  • Must follow verbal and written instructions.
  • Flexibility to work under production pressure.
  • Able to stand for long periods and lift up to 50 lbs.
  • Experience in industrial painting preferred.
  • Three years of prior industrial painting experience or auto painting experience considered.

Responsabilidades

  • Immerse parts in solution or wash surfaces to remove grease, rust, scale, and dirt.
  • Mask and cover surfaces not to be painted.
  • Set up and operate painting equipment to coat metal products with lacquer, paint, varnish, enamel, oil, or rust-proofing material.
  • Prepare metal surfaces for painting, and paint parts, equipment, interiors, and exteriors using brushes, spray guns, sanders, and rollers.
  • Mix chemicals and paints, fill tanks, control viscosity, adding prescribed amounts of paints, thinner, and chemicals to mixture.
  • Determine flow and viscosity of paints and quality of coating visually or by viscometer.
  • Operate spray guns, position nozzles to direct spray onto work piece, and regulate air pressure in spray guns that atomize spray.
  • Verify correct paint colors by reading building prints and designs.
  • Strip, sand, mask, and repaint surfaces, blend and polish finish to match surroundings, using tools.
  • Spray foam insulation and undercoating as required in buildings.
  • Place articles or materials in drying racks or containers.
  • May use full-face ventilation mask for extended periods.
  • Spray specified amount or thickness of coatings onto prepared surfaces using spray equipment
  • May operate lifting and moving devices to move materials and access areas to be painted.
  • Clean equipment and tools, organize and store as required.
  • Dispose of waste according to safety and OSHA regulations.
  • Work safely without presenting a direct threat to self or others.
  • Inspect and service wear or defective parts on paint equipment.
  • Train new Painters and Painter Helpers in safe operation of equipment.
  • Perform additional duties as requested.

Conhecimentos

Follow verbal and written instructions
Team collaboration
Attention to detail
Stand for long periods
Physical stamina
Math calculations

Formação académica

High school diploma, GED or equivalent

Ferramentas

Spray guns
Sanding tools
Masking equipment
Viscometer
Full-face respirator
Lifting devices
PPE safety gear
Forklift certification

Descrição da oferta de emprego

Description

Prepare and paint custom-ordered and custom-manufactured metal buildings according to specifications, mixing paint as required, using spray guns and other equipment to ensure high quality finish and appearance.

Available Shifts:

Day Shift- 6:00-4:30pm

Evening Shift- 4:30pm-3:00am

Weekend Shift - Friday - Sunday, 5:00am-5:00pm

Job Responsibilities/Key Accountabilities
  • Immerse parts in solution or wash surfaces to remove grease, rust, scale, and dirt.
  • Mask and cover surfaces not to be painted.
  • Set up and operate painting equipment to coat metal products with lacquer, paint, varnish, enamel, oil, or rust proofing material:
  • Prepare metal surfaces for painting, and paints parts, equipment, interiors, and exteriors of buildings, using brushes, spray guns, sanders, and rollers.
  • Mix chemicals and paints, fill tanks, control viscosity, adding prescribed amounts or proportions of paints, thinner, and chemicals to mixture.
  • Determine flow and viscosity of paints and quality of coating visually or by use of viscometer.
  • Operate spray guns, position nozzles to direct spray onto work piece, and regulate air pressure in spray guns that atomize spray.
  • Verify correct paint colors by reading building prints and designs.
  • Strip, sand, mask, and repaint surfaces, blend and polish finish to match surrounding areas, manually or using portable power tools.
  • Spray foam insulation and undercoating as required in buildings.
  • Place articles or materials in drying racks or container.
  • May use a full face ventilation mask for extended periods of time.
  • Spray specified amount or thickness of primer, protective, decorative, or finish coatings, such as paint, lacquer, sealer, or enamel, onto prepared surfaces, using spray equipment
  • May operate lifting and moving devices to move materials and equipment and access areas to be painted.
  • Clean all equipment and tools, organize and store as required.
  • Dispose of waste appropriately, and according to safety and OSHA regulations.
  • Work safely without presenting a direct threat to self or others.
  • Inspect, recognize and service wearing or defective parts on all paint related equipment.
  • Train new Painters and Painter Helpers in appropriate and safe operation of all equipment and functions in the Paint Department.
  • Perform additional duties as requested.
Requirements
  • Ability to follow verbal and written instructions
  • Flexibility and ability to work under production pressure.
  • Ability to work in cooperation with other team members.
  • Must be able to stand on feet for long periods of time, work on ladders at heights and lift up to 50 lbs.
  • Must be able to work in enclosed spaces for extended periods of time.
  • Ability to perform basic math calculations and measurements.
  • Three years of prior industrial painting experience, auto painting may be suitable exp.
Additional skills desired:
  • Detail oriented.
  • Forklift certification or ability to obtain certification.
  • Experience in body work such as bonding, repairing dents, scratches, etc.
Educational Requirements/Degree(s)
  • High school diploma, GED or equivalent
Obtém a tua avaliação gratuita e confidencial do currículo.

ou arrasta e larga o ficheiro aqui.

Similar jobs

Ofertas semelhantes que vale a pena comparar

Industrial Painter - Weekend Shift
Industrial Painter - Weekend Shift

Harvard Integrations • Tea (SD)

Presencial
USD 25 000 - 39 000
Industrial Painter – Weekend Shift
Industrial Painter – Weekend Shift

Harvard Integrations LP • Tea (SD)

Presencial
USD 21 000 - 30 000
Industrial Painter
Industrial Painter

Harvard Integrations LP • Tea (SD)

Presencial
USD 42 000 - 54 000
Industrial Painter
Industrial Painter

Pro Mechanical Services • Canton (OH)

Presencial
USD 33 000 - 37 000
Weekly Pay
Paid Time Off
Medical Insurance
+2
Painter/Sprayer/Coater
Painter/Sprayer/Coater

Wagner • Milwaukee (WI)

Presencial
USD 52 000 - 76 000
Industrial Spray Painter (evening shift)
Industrial Spray Painter (evening shift)

Amada America, Inc. • High Point (NC)

Presencial
USD 25 000 - 33 000
Shift premium
Weekend shift
Painter
Painter

Eliason Corporation • Houston (TX)

Presencial
USD 42 000 - 64 000
Life Insurance
PTO 3 weeks
Paid Holidays
+7
INDUSTRIAL PAINTER
INDUSTRIAL PAINTER

AtWork! • Mixon Town (FL)

Presencial
USD 38 000 - 48 000
Industrial Painter - Weekend Shift
Industrial Painter - Weekend Shift

Tomball Controls, LLC • Von Ormy (TX)

Presencial
USD 22 000 - 30 000
Paint Technician
Paint Technician

Stellar Industries Inc • Kanawha (IA)

Presencial
USD 19 000 - 30 000