HVAC Technician II

Salt-Lake-City-Corporatio; Salt Lake City (UT); On-site; USD 58,000 - 78,000; Full time

Benefits offered by this job

Health Insurance

Dental, Vision & Life Insurance

Paid vacation & personal leave

Six to twelve weeks parental leave

401(k) retirement contributions

Tuition reimbursement up to $4,000

Employee Assistance Plan (EAP)

Job summary

Salt Lake City Corporation in Salt Lake City, UT, is seeking an HVAC Technician II to join the Public Services Facilities Division. You will perform installation, maintenance, and repair of HVAC systems, including chillers and boilers, and service pneumatic and electronic controls while handling electrical work up to 480V.

You will read blueprints, fabricate ductwork, and ensure system efficiency through refrigerant management and component testing. EPA certification is required.

Qualifications

• High school diploma or equivalent; apprenticeship or 3+ years HVAC experience.
• EPA Type II Certification required; EPA Universal within 6 months of hire.
• Valid driver’s license and ability to obtain Utah driving privilege.
• Ability to read blueprints and equipment manuals; knowledge of corrosion control.
• Strong safety awareness and experience with HVAC controls and refrigeration.

Responsibilities

• Install, monitor, repair and service chillers, boilers, and air-conditioners 3–300 tons.
• Service environmental control systems; read blueprints and engineering specs.
• Mount compressors/condenser units; fabricate/install duct work with welding.
• Test systems, add refrigerant, and document refrigerant usage and reclamation.
• Replace defective electrical components and connect control panels to power.
• Work rotating shifts and be available for standby as needed.

Skills

Troubleshooting

HVAC maintenance

Blueprints interpretation

Electrical work up to 480V

Education

High school diploma or equivalent

Recognized HVAC apprenticeship

Tools

Electrical wiring up to 480V

Duct fabrication tools

Job description

Position Title:HVAC Technician IIBargaining Unit:AFSCMEJob Description:Performs journey level skills on air conditioning and heating equipment. Calibrates, installs, troubleshoots and repairs pneumatic and electronic controls. Also performs skilled work in electrical maintenance and installation involving line voltage up to 480V, 3-phase, plumbing, welding, and related procedures. Reports to facility’s Maintenance Coordinator. Works closely with facility instrumentation and electrical personnel.About the Position:We are seeking a skilled HVAC Technician to join our Facilities team! The HVAC Technician performs skilled maintenance, installation, and repair of heating, ventilation, and air conditioning (HVAC) systems, including chillers, boilers, and air conditioners. Responsibilities include troubleshooting and servicing pneumatic and electronic controls, performing electrical work up to 480V (3-phase), and handling plumbing, welding, and ductwork fabrication. The technician ensures system efficiency by testing, adding refrigerant, and repairing motors, compressors, and control panels. The position collaborates closely with the Maintenance Coordinator and other facility personnel to maintain efficient HVAC system operations.About the Team:The Public Services Facilities Division is an internal service that provides maintenance and repairs to City buildings such as City Hall, the Sorenson Unity Center, Smith’s Ballpark, and fire stations. This division is also responsible for the security and maintenance of the downtown and Sugar House business districts. Applicants for roles within the Facilities Division can expect to directly provide or support the skilled trades and maintenance to the City’s facilities to keep this important infrastructure running smoothly for its occupants.Learn more about working for Salt Lake City’s Public Services Facilities Division!Position Salary Range:$28.24 - $37.15This position is eligible for full city benefits, including:Health InsuranceDental, Vision and Life InsurancePaid vacation and personal leaveSix to Twelve weeks of paid parental leave from day 1 of employmentRetirement contributions toward a pension plan and/or 401(k)A robust Employee Assistance Plan (EAP)Up to $4,000 tuition reimbursement annuallyDiscounted supplemental benefits like pet insurance and legal servicesIMPORTANT: Early application submittal is encouraged. This position will remain open until filled and may close at any time without notice.Key Responsibilities:Installs, monitors, repairs and services chillers, boilers, and air-conditioners, ranging from 3 to 300 tons cooling capacity.Installs, services and repairs environmental control systems in all facility or plant buildings, utilizing knowledge of refrigeration theory, pipefitting, and structural layout.Mounts compressor and condenser units on platform or floor, using hand tools and following blueprints or engineering specifications.Fabricates, assembles, and installs duct work using portable metalworking tools and welding equipment. Installs evaporator unit in chassis or in air duct system. Cuts and bends tubing to correct length and shape. Changes filters and lubing equipment.Installs expansion and discharge valves in circuits. Connects motors, compressors, temperature controls, humidity controls and circulating/ventilation fans to control panels and connects control panels to power source.Tests systems and adds refrigerant to build up prescribed operating pressure. Tests joints and connections for gas leaks. Responsible for keeping a log of all refrigerant use and reclamation.Replaces defective breaker controls, thermostats, switches, fuses and electrical wiring to repair installed units.Performs all duties and responsibilities outlined in the HVAC Technician I Position Description.Performs other related duties as assigned.Minimum Qualifications:Graduation from high school or equivalent completion of a recognized apprenticeship program in the HVAC area, or three years of increasingly responsible HVAC experience. Related education may be substituted for up to two years’ experience on a year-for-year basis.Thorough knowledge of codes, standards, practices, materials, and methods used in HVAC maintenance. Ability to read and interpret blueprints, circuit diagrams and various styles of equipment operation manuals. Possesses knowledge of current practices for the control of corrosion in HVAC units and associated controls.Possession of EPA Type II Certification is required.Possession of or ability to obtain EPA Universal Type Certification within six months of hirePossession of valid state driver’s license or Utah driving privilege card. A commercial, Class B driver’s license may be required.Knowledge of safety rules and hazards and application of accident prevention measures associated with the operation of maintenance equipmentAbility to work rotating shifts, which may include days, afternoons, graveyards, weekends, and holidays.Subject to call-out and ability to work standby, as scheduled.SKILLS REQUIRED:Ability to troubleshoot and repair the following:Air handler units (both high- and low-pressure systems)Volume air ventilation boxes (both electronic and pneumatic controlled)Thermostats (pneumatics, electronic and electric-type controls)Pneumatic control cabinets (including, but not limited to, sensors relays, P.E. switches, pressure controls, velocity controls, valves, actuators, differential regulars)Refrigeration systems (CFC certification required for the handling and safe recovery of Freon ILS.E.S). Must have a complete understanding of Freon, thermostatic expansion valves, cap tub systems, accumulators, filter dryers all types, liquid receivers, evaporator, and condensing coils, hermetic, semi-hermetic, scroll and all other types of compressors, for their repair and proper operations. Must be able to make fast and accurate readings for superheat and temperature drop and know proper charging procedure of different Freon.Gas fired furnaces (including draft high efficiency furnace with spark generators, draft safeguards, inducer motors and all types of new safety controlsEvaporative coolers (Arvon, Wright, Alpine-type models)Electronic air cleaners for smoking roomsRadiant heatersHeat reclaim unitsIncinerator, induce draft modelWORKING CONDITIONS:Moderately heavy physical activity. Required push, pull or lift heavy weights up to 100 pounds from 10%-15% of the work time. Difficult working positions: may have to stand, walk or sit in uncomfortable position for extend periods and squat or crawl into small spaces under and nearoperation equipment to check and complete minor repairs. May perform work in ceilings, on tops of ladders, bucket lifts, scissor lifts and roof in heights exceeding 100 feet.High exposure to disagreeable elements such as dust, fumes, noise, dampness, cold heat, chemicals, or grease. Exposed to outside weather conditions year-round and moderate hazards much of the time.The above statements are intended to describe the general nature and level of work being performed by persons assigned to this job. They are not intended to be an exhaustive list of all duties, responsibilities and skills required of personnel so classified.All requirements are subject to possible modification to reasonably accommodate individuals with disabilities.POSITION TYPEFull-TimePOSITION SALARY RANGE:$28.24 - $37.15DEPARTMENTPublic ServicesFull Time/Part Time:Full timeScheduled Hours:40