Hardware Engineer

Ford Motor

Dearborn (MI)

Hybrid

USD 99,600 - 192,900

Full time

14 days+

Get more replies from employers

Send a job-specific resume in minutes.

Benefits offered by this job

Immediate medical, dental, vision and药

Flexible family care days, parental-le

Family building benefits incl. adption

Vehicle discount program

Tuition assistance

Paid time off for community service

Job summary

Ford Motor Company is seeking an experienced Hardware Engineer to own signal integrity and hardware robustness for high-speed in-vehicle links. You will author Layer 1–2 specs, lead design reviews, run simulations, and validate lab measurements across Ford vehicle programs in a hybrid Dearborn environment.

The role spans senior/lead/principal levels with expectations of mentoring other engineers and guiding electrical architecture.

Qualifications

Bachelor’s degree in Electrical Engineering or related field.
3+ years in electronic hardware design with focus on high-speed digital and mixed-signal.
2+ years using SI simulation or PCB design tools.
2+ years lab experience with oscilloscopes, VNA, TDR, and circuit-board rework.
Familiarity with CAN, LIN, SerDes and Ethernet.

Responsibilities

Conduct design reviews of ECU circuit designs for SI, EMC and electrical robustness.
Run simulations and perform lab measurements to validate results.
Define SI budgets for board, cable, connector, etc., considering jitter, noise, crosstalk and EMI/EMC.
Formulate board-level layout requirements including interconnects and components.
Create verification test methods and run tests per industry standards and internal requirements.
Lead root-cause analysis and corrective actions for prototypes and production vehicles.
Review EMI/EMC and conformance reports for networking components used in Ford products.
Collaborate with EMC, EDS, and Vehicle Validation teams to ensure SI is considered throughout development.
Provide technical guidance on feasibility and design alternatives for in-vehicle networks.
Partner with software/firmware teams during hardware bring-up and testing.
Build relationships with silicon, cable, and connector vendors to explore emerging technologies.
Contribute to industry standards to reduce costs and improve test automation.

Skills

High-speed digital

Mixed-signal design

SI simulation

PCB design tools

Lab measurement

CAN/LIN

EMC/EMI principles

Education

Bachelor's degree in Electrical Engineering

Tools

Altium Designer

Mentor Graphics

Cadence Allegro

HyperLynx

SIwave

Polar Instruments

Job description

We made history and now we work to transform the future – for our customers, our communities and our families. You'll see your work on the road every day, helping people move freely and pursue their dreams. At Ford, you can build more than vehicles. Come build what matters.

In this position...

We are looking for an experienced Hardware Engineer to own signal integrity (SI) and hardware robustness for high-speed, in-vehicle communication links within Ford's network communications hardware team.

Our team is responsible for ISO Layer 1 and 2 of networking. We work on finding and developing the right networking technologies for Ford’s next-generation electrical architecture. This means introducing new solutions and tweaking existing ones to help keep overall system costs down while ensuring electrical robustness for automotive use.

In this role, you will author Layer 1–2 networking specs and design verification documents that are used across all Ford vehicle programs. You will also lead hardware design reviews, run simulations, do lab validation for network interfaces, and help guide our electrical architecture. Depending on your experience, this position could be filled at the Senior / Lead / Principal level.

Ideally, you have hands‑on experience building and testing high-performance compute systems and high-speed digital interfaces (like PCIe, USB, Ethernet, FPD-Link, etc.), plus a background in guiding or mentoring other engineers.

Responsibilities

What you’ll do...

Conduct design reviews of ECU circuit designs to ensure they meet industry standards and automotive requirements for SI, EMC, and electrical robustness.

Run simulations to catch potential issues early, and follow up with lab measurements to validate.

Define SI budgets for different parts of the system (board, cable, connector, etc.), keeping jitter, noise, crosstalk, and EMI/EMC in mind.

Formulate board-level requirements for layout, interconnects, routing, and components.

Create design verification test methods and run tests based on industry standards and internal requirements.

Lead functional failure root-cause analysis and corrective actions for prototypes and production vehicles.

Lead component-level qualification of networking components for use in Ford products by reviewing EMI/EMC, interoperability, and other conformance reports.

Work closely with other Product Development teams (like EMC, Electrical Distribution Systems, and Vehicle Validation) to ensure SI is considered throughout the whole process.

Provide technical guidance to Product Development teams on feasibility, design alternatives, and design oversight for in-vehicle network implementations.

Collaborate with software and firmware teams during hardware bring-up and testing.

Build strong relationships with silicon, cable, and connector vendors to evaluate and introduce emerging technologies.

Contribute to industry standards efforts to reduce component cost, improve test automation, and address common automotive challenges in collaboration with industry experts.

Qualifications

You’ll have...

Bachelor’s degree in Electrical Engineering or a similar technical field.

3+ years of experience in electronic hardware design, mainly focusing on complex high-speed digital and mixed-signal designs.

2+ years working with SI simulation or PCB design tools (e.g., Altium Designer, Mentor Graphics, Cadence Allegro, HyperLynx, SIwave, Polar Instruments).

2+ years of hands‑on lab experience using equipment like oscilloscopes, Vector Network Analyzers (VNA), Time Domain Reflectometers (TDR), and doing circuit board rework.

Familiarity with standard automotive communication interfaces (CAN, LIN, SerDes, Ethernet).

A solid grasp of transmission line theory, S-parameters, bit error rate (BER) testing, crosstalk, characteristic impedance, eye diagrams, and time-domain analysis.

Good understanding of EMC/EMI principles in automotive settings.

Experience with high-reliability electronics for high-volume production, including using DFMEA and Worst-Case Analysis (WCA).

Even better, you may have...

PhD with 3+ years of relevant hardware/SI experience, or Master’s degree with 7+ years of relevant hardware/SI experience.

5+ years of experience with SI simulation and PCB design tools.

Strong background in transmission line and electromagnetic theory.

Specific automotive networking experience (e.g., 10BASE-T1S, 100/1000BASE-T1, Multi-Gig T1, GMSL/FPD-Link, CAN-FD, LIN).

Familiarity with how typical vehicle electrical architectures are built and the automotive development process.

Experience with networking hardware architectures, topologies, and protocols.

Experience with EMC/EMI standards and testing (like Ford FMC1278, ISO 7637, CISPR 25).

Experience capturing and writing technical requirements and specifications.

Comfort using vehicle diagnostic tools to troubleshoot network issues.

Prior involvement with standards organizations like IEEE, SAE, ASA, or the OPEN Alliance.

You’re comfortable taking ownership of loosely defined goals, asking the right questions to get clarity, and working well with others to get the job done.

You may not check every box, or your experience may look a little different from what we’ve outlined, but if you think you can bring value to Ford Motor Company, we encourage you to apply!

As an established global company, we offer the benefit of choice. You can choose what your Ford future will look like: will your story span the globe, or keep you close to home? Will your career be a deep dive into what you love, or a series of new teams and new skills? Will you be a leader, a changemaker, a technical expert, a culture builder…or all of the above? No matter what you choose, we offer a work life that works for you, including:

Immediate medical, dental, vision and prescription drug coverage

Flexible family care days, paid parental leave, new parent ramp-up programs, subsidized back-up child care and more

Family building benefits including adoption and surrogacy expense reimbursement, fertility treatments, and more

Vehicle discount program for employees and family members and management leases

Tuition assistance

Established and active employee resource groups

Paid time off for individual and team community service

A generous schedule of paid holidays, including the week between Christmas and New Year’s Day

Paid time off and the option to purchase additional vacation time.

This position is a salary grade range of 7 – 8 and ranges from $99,600 - $192,900.

Final determination of salary grade will be based on candidate's skills and experience, and base salary will be set within the applicable range according to job scope, responsibility and competitive market value.

Visa sponsorship is not available for this position.

Candidates for positions with Ford Motor Company must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire.

We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, age, sex, national origin, sexual orientation, gender identity, disability status or protected veteran status. In the United States, if you need a reasonable accommodation for the online application process due to a disability, please call 1-888-336-0660.

This position is hybrid. Candidates who are in commuting distance to a Ford hub location may be required to be onsite four or more days per week. #LI-Hybrid #LI-DP1

Job Info