Firmware Engineer

mindrobotics

Palo Alto (CA)

On-site

USD 120,000 - 180,000

Full time

14 days+

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Mind Robotics is seeking a Firmware Engineer to own the embedded software for our robotic systems, from motor control to real-time scheduling and high-speed communications.

You will work with hardware and software teams to implement robust firmware, RTOS tasks, and validation tooling, ensuring reliable operation in real-world environments.

Qualifications

  • Degree in Electrical/Computer Engineering or equivalent.
  • Experience building firmware for real physical systems - robots, motors, or similar.
  • Fluency in C/C++ and/or Rust for embedded targets; reading datasheets and writing drivers.
  • Hands-on experience with RTOS environments (FreeRTOS, Zephyr) – scheduling and real-time guarantees.
  • Strong knowledge of embedded protocols CAN, EtherCAT, I2C, SPI, UART.
  • Experience configuring microcontroller peripherals (GPIO, ADC, PWM, timers, DMA) and timing impact.
  • Sensor/actuator firmware-level integration, not just using libraries.
  • Proven debugging across hardware/software with oscilloscope, logic analyzers, and JTAG.
  • Engineering curiosity and ability to work across system boundaries.

Responsibilities

  • Write, test, and maintain production-quality firmware in C/C++ or Rust.
  • Implement and debug embedded protocols CAN, EtherCAT, I2C, SPI, UART.
  • Configure microcontroller peripherals for sensors, actuators, and power electronics.
  • Integrate encoders, IMUs, torque sensors into real-time pipeline.
  • Collaborate with hardware engineers on board bring-up and interfaces.
  • Develop and tune real-time control loops for motors and actuators.
  • Build tooling for firmware validation, regression testing, and hardware-in-the-loop.
  • Triage and debug cross-domain interactions during development and field deployment.

Skills

Embedded firmware for robots
C/C++ and/or Rust
RTOS experience
CAN/EtherCAT/I2C/SPI/UART
GPIO/ADC/PWM/DMA timing
Sensor/actuator integration
Debugging with oscilloscope/JTAG
System-level thinking
Ambiguity tolerance

Education

Bachelor's degree in Electrical/Computer Engineering or equivalent

Tools

FreeRTOS
Zephyr
JTAG
CAN
EtherCAT
I2C
SPI

Job description

The Role

At Mind Robotics, we're building generalized physical AI -robotic systems capable of dexterous, adaptive, and reasoning-intensive work in real-world industrial environments. Firmware is the connective tissue between intelligence and action; the layer where commands become motion.

We're looking for a Firmware Engineer to own the embedded software that brings our robots to life - from low-level motor control and real-time scheduling to the communication buses that tie the whole system together.

Responsibilities
  • Write, test, and maintain production-quality firmware in C/C++ or Rust for microcontrollers and embedded processors across the robot
  • Implement and debug embedded communication protocols - CAN, EtherCAT, I2C, SPI, UART - across distributed hardware nodes
  • Configure and manage microcontroller peripherals - GPIO, ADC, PWM, timers, and DMA - to interface with sensors, actuators, and power electronics
  • Integrate sensors (encoders, IMUs, torque sensors, force/torque arrays) into the robot's real-time pipeline
  • Work closely with electrical engineers on board bring-up, pinout definitions, and hardware-software interface design
  • Develop and tune real-time control loops for motors, actuators, and other physical systems under hard timing constraints
  • Build tooling to support firmware validation, regression testing, and hardware-in-the-loop systems
  • Triage and debug complex interactions between firmware, hardware, and higher-level software during development and field deployment
Qualifications
  • Technical degree in Electrical Engineering, Computer Engineering, or equivalent
  • Demonstrated experience (through work, research, or projects) building firmware for real physical systems - robots, motors, power electronics, or similar
  • Deep fluency in C/C++ and/or Rust for embedded targets; comfort reading datasheets and writing drivers
  • Hands-on experience with RTOS environments (FreeRTOS, Zephyr, or similar) - task scheduling, priority management, and real-time guarantees
  • Strong working knowledge of embedded communication protocols: CAN, EtherCAT, I2C, SPI, UART
  • Direct experience configuring microcontroller peripherals (GPIO, ADC, PWM, timers, DMA) and understanding their impact on system timing and performance
  • Experience integrating sensors and actuators at the firmware level - not just using libraries, but understanding the hardware underneath
  • Proven ability to debug across the hardware/software boundary with oscilloscopes, logic analyzers, and JTAG
  • You are comfortable with ambiguity, move fast, and have an "engineering curiosity" that drives you to understand how the entire system works, not just your part
Nice to Have
  • Experience with safety-critical or deterministic real-time systems (IEC 61508, ISO 26262, or similar)
  • Familiarity with field-oriented control (FOC) or other motor control algorithms
  • Experience with Linux-based embedded systems and the boundary between RTOS and application layers
  • Python scripting for test automation, data logging, or hardware validation
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Firmware Engineer
Firmware Engineer

Mind Robotics • Palo Alto (CA)

On-site
USD 100,000 - 130,000
Firmware Engineer
Firmware Engineer

Mind Robotics • Iowa

On-site
USD 85,000 - 125,000
Senior Firmware Engineer, Robotics
Senior Firmware Engineer, Robotics

Dexmate • Fremont (CA)

On-site
USD 140,000 - 190,000
Senior Robotics Firmware Engineer — Real-Time Motor Control
Senior Robotics Firmware Engineer — Real-Time Motor Control

Dexmate Inc. • Fremont (CA)

Hybrid
USD 150,000 - 190,000
Senior Firmware Engineer
Senior Firmware Engineer

Rhoda AI • Mountain View (WY)

On-site
USD 120,000 - 160,000
Firmware Engineer – Sensing & Actuation
Firmware Engineer – Sensing & Actuation

Proception Inc. • Palo Alto (CA)

On-site
USD 120,000 - 180,000
Systems Engineer
Systems Engineer

Mind Robotics • Iowa

On-site
USD 120,000 - 180,000
Embedded Systems Engineer, Robotics
Embedded Systems Engineer, Robotics

Dexmate Inc. • Fremont (CA)

On-site
USD 120,000 - 180,000
System Integration Engineer
System Integration Engineer

Mind Robotics • Iowa

On-site
USD 80,000 - 110,000
Embedded Systems Engineer, Robotics
Embedded Systems Engineer, Robotics

Dexmate Inc. • Fremont (CA)

On-site
USD 120,000 - 180,000