Finish Repair Tech / PI (Small Parts)

Brunswick Corporation; Seattle (WA); On-site; USD 30,000 - 37,000; Full time

Benefits offered by this job

Medical

Dental

Vision

Paid vacation

401k match

Health Savings Account

Wellbeing program

Job summary

Brunswick Corporation is seeking skilled fiberglass technicians to build and repair boat hulls, decks, and components at our Seattle facility. You will work with gel-coat systems, solvents, paints, and abrasives to achieve high-quality, structurally sound finishes.

The role requires reading prints, using hand and specialty tools, and passing an internal skills test demonstrating proper gel-to-catalyst mixing and defect repair techniques. Safety and quality are top priorities.

Qualifications

• High School diploma or GED.
• 2-3 years of boat building experience preferred.
• Working knowledge of hand tools.
• Ability to read and understand prints and production schedules.
• Ability to work with suspended loads and heavy lifting, up to 50lbs.
• Effective interpersonal and communication skills, both written and verbal.
• Ability to adapt to changing requirements in a positive and proactive way.
• Excellent attention to detail for identifying defects and inconsistencies in parts and components.
• Preferred: experience in quality control or inspection in a manufacturing/marine environment.
• Preferred: proficiency with precision measuring tools such as calipers, micrometers, and coordinate measuring machines.

Responsibilities

• Tech I Building and repairing fiberglass boat hulls, decks, and small parts using hand tools and specialty tools like gel-coat spray equipment, grinders, buffers, and drills.
• Inspecting parts and understanding fiberglass finishes or basic use of abrasives.
• Handling and applying solvents, paints, pastes, putty, and wax, along with proper disposal.
• Follow specific job instructions and provide verbal and/or written status of part completion.
• Recognizing and protecting boat components while performing finishing duties.
• Tech II Advanced knowledge and proficiency in all Tech I job duties.
• Satisfactory completion of an internal skills test that will include, but is not limited to: Ability to demonstrate proper gel to catalyst chemical mixture through calculating proper component levels and ability to mix to standard temperatures.
• Requires demonstration, in a specified timeframe, of acceptable repair methodologies for the following defects on a small part geometry following gel coat surface acceptance criteria: dual action sand marks and blemishes, pits, pinholes, craters, cracks, mold marks, air voids, takeoff and buff.

Job description

Are you ready for what's next?

Come explore opportunities within Brunswick, a global marine leader committed to challenging conventions and innovating next-generation technologies that transform experiences on the water and beyond. Brunswick believes "Next Never Rests", and we offer a variety of exciting careers and growth opportunities within united teams defining the future of marine recreation.

Innovation is the heart of Brunswick. See how your contributions will help transform vision into reality:

Grade: 4 - Tech I

Grade: 5.2 - Tech II (must pass skills test)

Position Overview :

Responsible for constructing and repairing fiberglass boat hulls, decks, and small parts. This role involves using a variety of tools and materials to ensure high-quality finishes and structural integrity.

Essential Functions :

• Tech I Building and repairing fiberglass boat hulls, decks, and small parts using hand tools and specialty tools like gel-coat spray equipment, grinders, buffers, and drills.
• Inspecting parts and understanding fiberglass finishes or basic use of abrasives.
• Handling and applying solvents, paints, pastes, putty, and wax, along with proper disposal.
• Follow specific job instructions and provide verbal and/or written status of part completion.
• Recognizing and protecting boat components while performing finishing duties.
• Tech II Advanced knowledge and proficiency in all Tech I job duties.
• Satisfactory completion of an internal skills test that will include, but is not limited to: Ability to demonstrate proper gel to catalyst chemical mixture through calculating proper component levels and ability to mix to standard temperatures.
• Requires demonstration, in a specified timeframe, of acceptable repair methodologies for the following defects on a small part geometry following gel coat surface acceptance criteria: dual action sand marks and blemishes, pits, pinholes, craters, cracks, mold marks, air voids, takeoff and buff.

Required Qualifications:

• High School diploma or GED.
• 2-3 years of boat building experience preferred.
• Working knowledge of hand tools.
• Ability to read and understand prints and production schedules.
• Ability to work with suspended loads and heavy lifting, up to 50lbs.
• Effective interpersonal and communication skills, both written and verbal.
• Ability to adapt to changing requirements in a positive and proactive way.
• Excellent attention to detail for identifying defects and inconsistencies in parts and components.

Preferred Qualifications:

• Previous experience in quality control or inspection, preferably in a manufacturing or marine environment.
• Advanced proficiency with precision measuring tools and equipment, such as calipers, micrometers, and coordinate measuring machines.
• Proven ability to identify and resolve quality issues and recommend corrective actions.
• Strong ability to meticulously document inspection findings and maintain accurate records.

Working Conditions:

• Maintain cleanliness, ensure safety compliance to include PPE adherence, safety policy adherence, and safe behaviors and conditions.
• Must possess the desire and ambition to always work safely and report all hazards to their supervisor immediately.
• Must understand basic terminology such as OSHA, DEP, and other regulatory agencies.
• Must be able to wear required personal protective equipment where designated, including but not limited to safety glasses, hearing protection, gloves, etc.

The pay range for this position is $21.85 to $24.55 (Tech I) or $24.15 to $27.05 (Tech II), hourly. The actual base pay offered will vary depending on multiple factors including job-related knowledge/skills, relevant experience, business needs, and geographic location.

Employees may be eligible to participate in Brunswick's comprehensive and high-quality benefits offerings, which includes medical, dental, vision, paid vacation, 401k (up to 4% match), Health Savings Account (with company contribution), wellbeing program, product purchase discounts, and much more. Details about our benefits can be found here.

At Brunswick, it is not typical for an individual to be hired at or near the top end of the salary range for their role. Compensation decisions are dependent upon the specifics of the candidate’s qualifications and the business context.

Why Brunswick:

Whatever tomorrow brings, we'll be at the leading edge. As the clear leader in the marine industry, we're committed to our values and supporting our exceptional people. We offer valuable benefits including a competitive 401(k) plan with company match, health benefits, paid time off, a robust Wellness Program, and much more . In addition, we're proud of being recognized for making a splash with numerous awards !

About Brunswick Boat Group

Brunswick Boat Group is home to a diverse portfolio of iconic marine brands, including Bayliner, Boston Whaler, Crestliner, Cypress Cay, Harris, Heyday, Lowe, Lund, Navan, Princecraft, Protector, Quicksilver, Rayglass, Sea Ray, Spartan, Thunder Jet, and Uttern. Each brand carries a legacy of innovation, craftsmanship, and performance that has shaped the boating industry worldwide.

Across our fiberglass and aluminum manufacturing facilities