Fiber Splicing Technician II

Page Mechanical Group, Inc.; Ontario (CA); On-site; USD 50,000 - 85,000; Full time

Job summary

Page Mechanical Group, Inc. is seeking a Fiber Splicing Technician I, II or III to splice, test, troubleshoot, and repair fiber optic cables in field installations.

The role supports the Construction department and reports to the Foreman or Construction Manager. The technician will perform end-to-end fiber work including testing with OTDRs and power meters, reading prints, organizing cables, and ensuring safety on outdoor sites.

Qualifications

• HS diploma or GED required; FOA CFOT preferred.
• Ability to read blueprints and splice drawings; color identification.
• OSHA 10 or higher; willingness to maintain safety standards.

Responsibilities

• End-of-Line Testing: verify light levels and signal balance.
• Cable prep and labeling for clean installation.
• Build fiber cases and enclosures for protection.
• Splice fibers by color matching; manage multiple cables.
• Organize cables inside enclosures; ensure neat routing.
• Seal and secure fiber enclosures to protect equipment.
• Read prints/maps; follow splice matrices and redlines.
• Route jumps and trays; connect jumper cables as needed.
• Perform OTDR and power-meter based line tests.

Skills

Fiber splicing

OTDR testing

Power meter/OLTS

Blueprint reading

Cable management

Safety compliance

Troubleshooting

Equipment setup

Education

High School Diploma or GED

FOA CFOT certification preferred

Tools

OTDRs

Fiber splicing equipment

Job description

Job Title: Fiber Splicing Technician I, II, III

Department: Construction

Reports To: Foreman orConstruction Manager

Employment Status: Hourly (non-exempt)

We will determine salary based on skills and experience in relation to the function of the role, as well as equity to any other employees in the same or similar role.

Job Summary

The Fiber Splicing Technician splices, tests, troubleshoots, and repairs fiber optic cables.

Job Accountabilities

• End-of-Line Network Testing: Testing light levels at the end of fiber networks for balanced signal between points is crucial to ensure proper signal transmission and network performance.
• Cable Prep: Ensure that cables are properly labeled and organized to minimize errors during installation.
• Build Fiber Cases and Enclosures: Constructing fiber cases and enclosures involves creating protective housing for fiber optic equipment and connections.
• Splice Color for Color Fibers: When splicing fiber optic cables together, technicians match the colors of the fibers to ensure that the correct fibers are connected. Splice off color and multiple cables in one enclosure.
• Organize the cables neatly within the enclosure, ensuring that they are properly routed and secured to prevent tangling or damage.
• Sealing and Placement of Case: Ensuring that the enclosure is properly closed and secured to protect the equipment and cables inside from environmental elements.
• Read Prints and Maps: Examine Splice Matrix and redline maps to understand fiber routes and assignments.
• Jumping Trays: Routing fibers from one tray to another, possibly to optimize cable management, minimize signal loss, or create efficient pathways within the enclosure. Connect Jumper cables between jumper cases.
• Splice Tie Point and Jumper Cases: Splicing fibers at a tie point involves connecting fibers from different cables.
• Use Optical Time Domain Reflectometers (OTDRs) and optical power meters to locate breaks, measure attenuation, and test line integrity.
• Rehab gel-filles cases: The process of refurbishing or rehabilitating gel-filled enclosures used in fiber optic networks.
• Redlining and Documentation: Marking up or annotating existing drawings or documents with changes, updates, or corrections.
• Case swaps and audits: Replacing one equipment case or enclosure with another.
• Troubleshooting: Identifying, diagnosing, and resolving issues that can affect the performance and reliability of the network.
• May pull cable through existing duct package, pull cable through conduit either manually, blowing, or mechanically, and splice and activate underground and aerial lines.
• Performs other duties as assigned.

Teamwork Accountability

• Participating in day-to-day Splicing activities in the field, including performing assigned crew activities, equipment, schedules, productivity, and administrative tasks
• Proven ability to collaborate with Splicing team and perform activities with Splicing crew, ensuring work is performed in a safe, accurate, and timely manner
• May participate in onboarding and training Splicing crew members (dependent on level)

Customer Management

• Responds to inquiries or complaints from customers or members of the business community in a professional manner (dependent on level)

Safety Management

• Actively follows safety policies and procedures in compliance with all relevant local, state, and federal regulations.
• Participate in daily JSA (Job-site Safety Analysis) with the Splicing team
• Conduct daily inspections and audits of vehicles and equipment to ensure compliance with safety standards and identify potential hazards.

Project Management

• Works with Foreman or Manager on coordinating, scheduling, and material ordering (depending on level)
• Provide updates on daily production/job and keep track of work hours
• Involvement in invoice approvals for subcontractors (dependent upon level and job assignment)
• Complete milestones and deliverables during the lifespan of a project

Required Skills/Abilities

• Ability to do physical labor, climb ladders and poles, work in confined spaces, etc.
• Ability to read blueprints for job specifications in placement of cables, location of utilities, etc.
• Must be able to distinguish between different colors for connection of fibers.
• Must be a self-starter and internally motivated to achieve corporate, department, and personal objectives.
• Must possess excellent interpersonal communication skills (oral and written) and be a team player.
• Must possess excellent problem solving and decision-making skills.
• Ability to use basic math skills to compute measurements, figure ohms, timecards, etc.
• Ability to listen and to follow directions.
• Must be organized, multi-tasked oriented, and maintain a neat and safe work environment.
• Ability to work in high places on ladders and poles.
• Ability to work in confined spaces.
• Ability to distinguish different fiber connections.

Education and Experience

• High School Diploma or GED
• Fiber Splicing Certification preferred (i.e. Fiber Optic Association (FOA) Certified Fiber Optic Technician (CFOT) or Specialist (CFOS/S))

Physical Requirements

• Must be able and willing to work outdoors, subject to inclement weather conditions
• Must be able to maintain visual and audible contact with other crewman and all moving or stationary persons/vehicles/objects to ensure safe coordination of movement
• Must be able to work around heavy equipment and machinery
• Must be able to stand or walk for long periods of time
• Must be able to lift and carry up to 50 pounds
• Routinely requires extended periods of bending, squatting, climbing, kneeling, pushing, pulling, lifting, lifting in awkward positions, standing, and twisting
• Must be able to stand, walk, sit or be in other physically demanding positions for long periods of time
• Must be able to work while wearing safety boots, safety glasses, hardhat, and any applicable safety gear

Minimum Required Licenses/Certificates/Registrations

• OSHA 10

Competency Matrix

• Typical experience
  • Level 1 – Junior: 0–1 year
• Work independently
  • Level 1 – Junior: Limited
• Single-fiber splicing
  • Level 1 – Junior: Basic
• Ribbon/mass fusion
  • Level 1 – Junior: Training/basic
• OTDR testing
  • Level 1 – Junior: Basic
• Power meter/OLTS
  • Level 1 – Junior: Basic
• Fiber troubleshooting
  • Level 1 – Junior: Assisted
• Closures
  • Level 1 – Junior: Assisted
• Cabinets/FDHs
  • Level 1 – Junior: Assisted
• Reading prints
  • Level 1 – Junior: Basic
• Documentation
  • Level 1 – Junior: With review
• Troubleshooting outages
  • Level 1 – Junior: Assisted
• Crew leadership
  • Level 1 – Junior: No
• Training others
  • Level 1 – Junior: No
• Customer/GC communication
  • Level 1 – Junior: Limited
• Quality responsibility
  • Level 1 – Junior: Own work
• OSHA Certification
  • Level 1 – Junior: OSHA 10

A Fiber Splicing Technician I, II or III titledifferentiation lies in the experience and/or skill level of theindividual.

All requirements are subject to possible modification to reasonably accommodate individuals with disabilities.

This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform other job-related duties requested by their supervisor.

Requirements are representative of minimum levels of knowledge, skills, and/or abilities. To perform this job successfully, the incumbent will possess the abilities or aptitudes to perform each duty proficiently.

This document does not create an employment contract, implied or otherwise, other than an “at-will” employment relationship.