Fabricator/Welder

Valtir Llc

Rocklin (CA)

On-site

USD 27,000 - 30,000

Full time

14 days+

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Valtir LLC in Rocklin, CA is seeking an Engineering Technician/Fabricator to fabricate, assemble and install engineered product prototypes. You will read work-orders and drawings, layout parts, and use metal-working tools.

A background of at least 3 years in fabrication or construction is required; welding experience and ability to lift up to 50 lbs are important. AWS horizontal welding certification a plus; forklift/bobcat experience desirable.

Qualifications

  • Minimum of 3 years experience in fabrication shop or construction-related field.
  • Ability to read, interpret and work from work-orders, drawings and sketches.
  • Forklift/bobcat experience desirable.

Responsibilities

  • Fabricate components from metal, plastic, wood per work-orders and drawings.
  • Weld components; AWS horizontal welding certification is a plus.
  • Assemble and install product prototypes in a safe, timely manner.

Skills

Fabrication
Layout
Engineering drawings
Welding
Reading work-orders

Tools

Welding
Band saw
Drill press
Cutting torch
Grinders

Job description

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

BU - Research & Development Full Time Administrative Rocklin, CA, US

Salary Range: $27.00 To $30.00 Annually

Under the direction of the Fabrication Shop Supervisor, the Engineering Technician/Fabricator shall be responsible for fabrication, assembly and installation of a variety of engineered product proto-types. Work performed will require layout and fabrication skills, use of metal working equipment, hand and power tools used in fabrication, assembly and installation of highway safety hardware. Job duties shall include:

Essential Functions

Conduct layout and fabricate components from a variety of materials i.e. metal, plastic, wood etc... meeting the necessary quality requirements and time frames required to safely complete projects, working from work-orders, engineering drawings, sketches and verbal instructions. Metal assembly, including component fabrication followed by welding is a critical part of this job. A welder certified in horizontal welding by AWS (American Welding Society) would be a plus.

Timely assembly of product & prototypes to meet the necessary quality requirements; working from work-orders, engineering drawings, sketches and verbal instructions.

Install product prototypes in a safe, timely and efficient manner. Ability to recognize installation problems, suggest enhancements and communicate these to appropriate parties to help improve future installations by others. After testing, prototypes shall be removed in a timely and efficient manner, as directed.

Ability to use common tools used in metal fabrication including but not limited to, i.e. welders (GMA = Gas Metal Arc), band saw, drill press, cutting torch, grinders, etc... Assembly and installation tools shall include, but is not limited to, common hand and power tools, i.e. concrete drill, backfill tamper, impact wrench, sockets, wenches etc...

Non-Essential Functions

Communication and people skills to allow direct interaction with employees in other departments, as directed.

Basic computer skills.

Perform other duties as directed by supervisor.

Education and Experience

With a minimum of three (3) years experience in a fabrication shop and/or three (3) years working in a construction related field. Requires fabrication experience using the following media: metal, plastics, wood, concrete, etc. Fabrication techniques will include: welding, layout, machine operation, general mechanics, and construction techniques. Ability to read, understand and work from work-orders, engineering drawings, sketches, and verbal instructions. Forklift/bobcat experience is also desirable.

Physical/Mental Requirements

The Engineering Technician must be able to, work in a warehouse/shop environment (non-climate controlled) and outdoors in various weather conditions. Have the ability to lift 50lbs, pry, push, or pull objects while performing various job tasks. Must posses working knowledge of fabrication and installation tools including; use of various power and hand tools needed to perform daily work assignments. Good near and far vision capabilities, good flexibility, mobility, stamina, finger and hand dexterity. Must have the ability to read, interpret and work from work-orders, engineering drawings and sketches. Perform basic math calculations including, addition, subtraction, multiplication, and division. Remain flexible in adjusting to changing priorities and job assignments. Ability to drive company vehicles in a safe and proper manner.

Work will be performed in a warehouse/shop environment non-climate controlled and outside in all weather conditio

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Fabricator/Welder
Fabricator/Welder

Valtir • Rocklin (CA)

On-site
USD 27,000 - 30,000
Fabricator / Welder
Fabricator / Welder

Rhino Tool House • Livonia (MI)

On-site
USD 26,000 - 32,000
Fabricator
Fabricator

Kalyn Siebert, L.P • Gatesville (TX)

On-site
USD 42,000 - 54,000
Metal Fabricator
Metal Fabricator

Ericson Manufacturing • Willoughby (OH)

On-site
USD 42,000 - 60,000
Welder Fabrication Technician
Welder Fabrication Technician

ADP, Inc. • Long Beach (CA)

On-site
USD 39,000 - 44,000
Accident/ Critical Illness Insurance
PPE Reimbursement
Continued training and professional de
+1
Welder Fabrication Technician
Welder Fabrication Technician

Jackson Dawson • Long Beach (CA)

On-site
USD 39,000 - 44,000
Accident/ Critical Illness Insurance
PPE Reimbursement
Continued training and professional 개발
+1
Fabricator
Fabricator

EnTrans International • Gatesville (TX)

On-site
USD 42,000 - 56,000
Metal Fabricator
Metal Fabricator

ADP, Inc. • Los Angeles (CA)

On-site
USD 34,000 - 48,000
Health, Dental, and Vision Benefits
Paid Time Off
401k Matching Program
+1
Sheet Metal Worker - Metal Fabrication
Sheet Metal Worker - Metal Fabrication

Hughes Circuits Inc. • San Marcos (CA)

On-site
USD 26,000 - 41,000
Metal Fabricator
Metal Fabricator

Object Construction • California

On-site
USD 34,000 - 48,000
Health, Dental, Vision
Paid Time Off
401k Matching
+1