Fabricator - San Antonio, TX

Enterprise Electrical; Kirby (TX); On-site; USD 38,000 - 52,000; Full time

Job summary

Enterprise Electrical seeks a skilled Fabricator to cut, form, join, and finish metal components for prefabrication and construction projects. You will interpret drawings, select materials, and operate fabrication tools to produce accurate parts while maintaining safety and quality standards.

You will work under the Lead Fabricator, ensure measurements and fit-up meet requirements, and contribute to timely completion of tasks in a dynamic shop environment.

Qualifications

• Understand fabrication drawings, dimensions, symbols, and work orders.
• Able to read blueprints and use measurement tools accurately.
• Knowledge of metal and structural steel properties and tolerances.
• Capable of performing fit-up, welding (with training), and finishing tasks.

Responsibilities

• Read and interpret fabrication drawings and work orders to determine materials and assembly requirements.
• Cut, form, and assemble metal components using saws, plasma cutters, and forming equipment.
• Perform fit-up, alignment, welding, bolting, and finishing per procedures and safety rules.
• Inspect dimensions and tolerances, report defects, and maintain clean work areas.

Skills

Fabrication processes

Read drawings

Measurement tools

Shop math

Safety procedures

Communication

Education

High school diploma or equivalent

Technical training or apprenticeship

Tools

Welding equipment

Plasma cutters

Saws and grinders

Forklifts

Job description

The Fabricator is a skilled production employee responsible for cutting, forming, joining, and finishing metal materials to produce components and assemblies used in Enterprise Electrical's prefabrication and construction operations. This role interprets drawings, dimensions, specifications, and work orders; lays out and prepares materials; and operates fabrication tools and equipment to produce accurate, durable work that meets project requirements and established quality standards.

The Fabricator performs hands-on work under the direction of the Lead Fabricator or Prefab Shop Foreman and is accountable for the safety, accuracy, and timely completion of assigned tasks. This position checks measurements and fit-up throughout production, identifies defects or drawing discrepancies, and communicates material needs and production concerns before proceeding with work that could affect quality or safety. In a growing organization, the Fabricator must adapt to changing priorities, fabrication methods, and project requirements while maintaining consistent workmanship and collaborating with shop team members.

Essential Functions, Duties, and Responsibilities

Tasks may include, but are not limited to the following:

• Read and interpret fabrication drawings, blueprints, shop sketches, specifications, cut lists, and work orders to determine dimensions, materials, and assembly requirements.
• Confirm assigned work instructions and identify missing dimensions, conflicting requirements, or drawing revisions; obtain clarification before fabrication.
• Select, inspect, measure, and mark metal stock and structural steel for cutting and forming, using approved dimensions and material specifications.
• Cut materials to size using authorized saws, shears, plasma cutters, or other cutting equipment available in the shop.
• Bend, form, drill, punch, or otherwise shape materials using appropriate machinery, fixtures, and tools within demonstrated qualifications.
• Position, align, clamp, and fit components before joining to maintain required dimensions, clearances, and assembly alignment.
• Join components through welding, bolting, fastening, or other specified methods; perform welding only when trained and qualified for the assigned process.
• Grind, deburr, clean, and finish fabricated components to remove sharp edges and prepare surfaces for subsequent work or installation.
• Check measurements, squareness, alignment, fit, and workmanship during fabrication and inspect completed components against drawings and specified tolerances.
• Identify and report defects, damaged materials, and nonconforming work; complete authorized repairs or rework and verify corrections.
• Operate computer-controlled fabrication equipment, when assigned, within approved programs and settings after completing required training and authorization.
• Stage, label, organize, and move materials and finished assemblies to support production flow and prevent damage or identification errors.
• Use approved lifting methods and material-handling equipment; operate forklifts or other powered equipment only when trained and authorized.
• Perform pre-use equipment checks, routine cleaning, and permitted maintenance; report malfunctions and remove unsafe equipment from use according to company procedures.
• Follow required machine guarding, hot-work, hazardous-energy control, and personal protective equipment procedures applicable to assigned work.
• Maintain accurate work-order, production, material-use, and time records as required; communicate task status, material shortages, delays, and equipment concerns to the lead or foreman.
• Keep work areas clean and organized, manage scrap appropriately, and collaborate with coworkers to complete assigned work safely and on schedule.
• Adapt to revised priorities and approved work methods and perform other duties and responsibilities as assigned.

Knowledge, Skills and Abilities

Required Knowledge, Skills, and Abilities:

• Working knowledge of metal fabrication processes, including cutting, forming, fit-up, joining, grinding, and finishing.
• Ability to interpret fabrication drawings, dimensions, symbols, specifications, and work orders and recognize when clarification is needed.
• Knowledge of metal and structural steel characteristics, material identification, and the effect of fabrication processes on component fit and quality.
• Ability to use tape measures, squares, calipers, levels, and other layout or inspection tools to verify dimensions and specified tolerances.
• Ability to apply shop mathematics, including fractions, decimals, angles, and basic geometry, to layout and fabrication tasks.
• Skill in safely setting up and operating assigned fabrication equipment, hand tools, and power tools within training and authorization.
• Knowledge of shop safety practices, machine guarding, hot-work precautions, safe material handling, and required PPE.
• Manual dexterity, hand-eye coordination, and attention to detail to position materials and produce consistent workmanship.
• Ability to identify fabrication defects and routine process problems, make authorized adjustments, and elevate concerns beyond assigned authority.
• Ability to organize assigned work, follow production priorities, and adapt to changing project requirements and deadlines.
• Ability to communicate task status and quality concerns to coworkers and shop leadership.
• Ability to work independently on assigned tasks and contribute to a team while maintaining safe work practices and accountability.

Work Environment/Physical Demands/Position Type and Expected Work Time

Work Environment:

• Work is primarily performed in a fabrication/shop environment.
• May be exposed to machinery, welding and fabrication operations, cutting and forming machinery, and material-handling activities.
• May be exposed to noise, dust, heat, and other shop-related conditions.
• Must follow all company safety policies and procedures.
• Must wear all required personal protective equipment (PPE).
• May be required to work around heavy materials and equipment.
• Must maintain awareness of surrounding personnel, equipment, and work activities at all times.

Physical Requirements:

This role requires the physical and environmental demands outlined below, with or without reasonable accommodation. The organization is committed to complying with the Americans with Disabilities Act (ADA) and providing reasonable accommodations to qualified individuals.

• Ability to stand and walk for extended periods.
• Ability to frequently bend, stoop, reach, climb, kneel, and crouch.
• Ability to use hands and arms repetitively throughout the workday.
• Ability to lift, carry, push, and pull materials and equipment as required by the position.
• Ability to safely lift and handle heavy materials with the assistance of appropriate equipment or other employees.
• Ability to safely operate or work around forklifts, slab carts, clamps, fabrication machinery, and other shop equipment.
• Ability to work safely in a fabrication/shop environment while following required safety procedures and PPE requirements.
• Ability to perform the physical and environmental demands of the position with or without reasonable accommodation.

Position Type:

• Full-Time / Non-Exempt

Required Education and Experience

Education:

• High school diploma or equivalent preferred.
• Technical training, vocational education, an apprenticeship, or coursework in welding, metal fabrication, machining, or a related trade preferred.

Certifications/Licenses:

• Welding qualification or certification is required when specified by the assigned welding process, project specifications, or company requirements.
• Forklift and other powered material-handling equipment may be operated only after completing required training, evaluation, and company authorization.
• Must complete required company safety training and maintain any certifications or equipment authorizations applicable to assigned duties.

Experience Requirements:

• Typically requires 2-4 years of hands-on experience in metal fabrication, welding, structural steel, or related shop production work; an equivalent combination of relevant technical training and demonstrated fabrication experience may be considered.
• Experience reading drawings or work orders and independently completing assigned fabrication tasks to specified dimensions and quality requirements.
• Experience using measuring and layout tools and operating cutting, drilling, grinding, forming, or joining equipment applicable to assigned work.
• Experience performing fit-up, assembly, and dimensional inspections and identifying defects or work requiring correction.
• Experience in construction prefabrication or producing components for electrical installations preferred.

Equipment or Machines Routinely Used in This Position

• Hand and power tools, including drills, impact tools, and grinders.
• Measuring and layout tools, including tape measures, squares, calipers, levels, and marking tools.
• Metal cutting equipment, including saws, shears, and plasma cutters, as equipped and assigned.
• Forming and drilling equipment, including brakes, presses, rollers, and drill presses, as equipped and assigned.
• Welding equipment and related accessories appropriate to assigned, qualified welding processes.
• Clamps, vises, fixtures, fabrication tables, and assembly tools.
• Forklifts, slab carts, pallet jacks, and other approved material-handling equipment, subject to training and authorization.
• Computer-controlled fabrication equipment and production terminals, as assigned.