Fabrication Technician

SpaceX

Texas

On-site

USD 65,000 - 95,000

Full time

15 hours ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

SpaceX in Starbase, TX is seeking a Fabrication Technician to build, maintain and upgrade mechanical and fluid systems supporting rocket testing and launch campaigns for the Starship program.

You will work with an elite team to rapidly assemble ground support equipment, calibrate high pressure systems, and ensure compliance with safety and oxygen service standards, while advancing a hands-on aerospace manufacturing career.

Qualifications

  • High school diploma or equivalency certificate.
  • 2+ years of industrial experience such as installing pipe and components, bending stainless tubes, or working around high pressure systems or mechanical systems.

Responsibilities

  • Provide ground support equipment (GSE) technician support involving building, installing, maintaining and troubleshooting equipment related to LOX and fuel pads.
  • Operate hardware, high pressure systems and pumps and related equipment.
  • Fabricate and repair GSE hardware and equipment.
  • Collaborate with design engineers to document GSE activities.
  • Ensure materials are clean and inspected according to oxygen service standards.
  • Build and maintain structural and engine test equipment.
  • Obtain and maintain licenses or certifications as required.
  • Follow SpaceX safety and quality policies and procedures.

Skills

Industrial experience
Mechanical aptitude
Reading schematics
High pressure systems
Hand and power tools

Education

High school diploma or equivalency

Tools

GSE equipment
Hand tools
Power tools

Job description

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.

FABRICATION TECHNICIAN

Fabrication technicians at Starbase, TX, will work to build, maintain, and upgrade mechanical and fluid systems to support various SpaceX rocket testing and launch campaigns. This technician will work with an elite team to rapidly build launch propellant assemblies that will contribute to the Starship program.

Responsibilities
  • Provide ground support equipment (GSE) technician support which involves building, installing, maintaining and troubleshooting equipment such as pumps, tanks, valves and plumbing related to the liquid oxygen (LOX) pad, fuel pad, and other aspects of the site facility
  • Operating hardware, high pressure systems and pumps, and other ancillary equipment including pneumatic components
  • Fabricate and repair GSE hardware and equipment
  • Collaborate with design engineers to develop and document GSE activities
  • Ensure all materials are clean and inspected according to Clean for Oxygen Service Standards
  • Build and maintain structural and engine test equipment
  • Obtain and maintain licenses, operator permits or certifications as required
  • Follow all necessary regulations and appropriate SpaceX procedures including quality policies, safety policies, OSHA, EPA, NIOSH, NFPA, ASME, NEC, etc.
  • Develop novel ways site wide to streamline processes and increase the reliability of testing operations
  • Perform a variety of related duties in support of engine testing and structural test stand programs
Basic Qualifications
  • High school diploma or equivalency certificate
  • 2+ years of industrial experience such as installing pipe and components, bending stainless tubes, or working around high pressure systems or mechanical systems
Preferred Skills And Experience
  • Experience in the space exploration industry, military or other high-reliability operating environment
  • Experience in ground support equipment in an aerospace industry
  • Mechanical aptitude and experience (work with machines and general tooling)
  • Formalized mechanical training, skilled in hand and power tool usage
  • A demonstrated experience where quick-thinking and problem solving plays a critical role
  • Knowledge of high vacuum systems
  • Knowledge of medium pressure systems
  • Knowledge of all types of bore scope inspection equipment
  • Knowledge of different fittings such as NPT and A/N
  • Ability to utilize power tools and hand tools as well as heavy equipment
  • Use of precision measuring instruments
  • Ability to read and understand mechanical and electrical schematics
  • Knowledge of hazardous systems - cryogenic, flammable, hypergolic, pyrophoric
  • Knowledge of high-pressure system design and handling
  • Experience using test instrumentation and control components
Additional Requirements
  • Anticipated hours for this position are Monday - Friday, 6:00 PM - 6:00 PM
  • Must be available for overtime and weekends as needed based on site operational needs; flexibility is required
  • Stand: Up to 10 hours per day
  • Sit: Up to 3 hours per day
  • Push/Pull: Up to 75lbs. (unassisted) between 1 to 2 hours per day
  • Overhead reach: Up to 10 hours per day
  • Walk: Up to 10 hours per day
  • Lift/Carry: up to ≤ 50 lbs. (unassisted) between 1 to 2 hours per day
  • Climb (ladder/stairs): Up to 6 hours per day
  • Kneel/Crouch: Up to 10 hours per day
  • Upper body twist: Up to 6 hours per day
  • Ability to work in temperatures over 80 degrees 6 hours or greater per day
  • Candidate must be capable of safely working at heights (up to 500ft), in confined spaces, operating heavy equipment and machinery, and performing the physical requirements of the job listed in the job description. Candidate may be required to complete a pre-employment questionnaire and/or physical to confirm these capabilities, which may include a medical history review
Itar Requirements
  • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C.
  • 1157, or (iv) Asylee under 8 U.S.C.
  • 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here.

SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Applicants wishing to view a copy of SpaceX’s Affativer Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Fabrication Technician
Fabrication Technician

Starlink • Texas

On-site
USD 60,000 - 90,000
Fabrication Technician - 2nd Shift
Fabrication Technician - 2nd Shift

SpaceX • Texas

On-site
USD 65,000 - 100,000
Fabrication Technician - 2nd Shift
Fabrication Technician - 2nd Shift

SPACE EXPLORATION TECHNOLOGIES CORP • McGregor (TX)

On-site
USD 40,000 - 60,000
Fabrication Technician - 2nd Shift
Fabrication Technician - 2nd Shift

SpaceX • McGregor (TX)

On-site
USD 40,000 - 60,000
Fabrication Technician (Panel Systems) - Multiple Shifts - Level 4/5
Fabrication Technician (Panel Systems) - Multiple Shifts - Level 4/5

Starlink • Florida

On-site
USD 85,000 - 120,000
Fabrication Technician (Falcon Operations West) - 1st Shift
Fabrication Technician (Falcon Operations West) - 1st Shift

SpaceX • Vandenberg Village (CA)

On-site
USD 32,000 - 58,000
Fabrication Technician (Fluid Systems) - Multiple Shifts
Fabrication Technician (Fluid Systems) - Multiple Shifts

Spacex • Florida

On-site
USD 70,000 - 100,000
Fabrication Technician (Falcon Operations West) - 1st Shift
Fabrication Technician (Falcon Operations West) - 1st Shift

Starlink • Vandenberg Village (CA)

On-site
USD 32,000 - 56,000
Medical coverage
Vision coverage
Dental coverage
+7
Fabrication Technician (Panel Systems) - Multiple Shifts
Fabrication Technician (Panel Systems) - Multiple Shifts

Starlink • Florida

On-site
USD 65,000 - 90,000
Fabrication Technician (Falcon Operations West) - 1st Shift
Fabrication Technician (Falcon Operations West) - 1st Shift

SpaceX • California

On-site
USD 32,000 - 56,000
Company stock
Employee Stock Purchase Plan
Medical, vision, and dental coverage
+5