Exterior Mechanisms Engineer

altentechnologyusa

Long Beach (CA)

On-site

USD 125,000 - 140,000

Full time

14 days+

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

ALTEN Technology USA in Long Beach, CA is seeking an experienced Mechanical Engineer to own exterior mechanism components end to end, from concept through production launch. You will design and release hinges, latches, struts, and actuators, ensuring opening/closing force targets and cycle life.

You will build and maintain CAD models in 3DX and CATIA, perform DFMEA and DVP&R, coordinate with suppliers, and drive design for manufacturing across injection molded and sheet metal parts.

Qualifications

  • Bachelor's degree in Mechanical Engineering or related discipline.
  • 5+ years of automotive or comparable product development experience owning mechanical components through launch.
  • Direct design and release experience on mechanisms, linkages, hinges, latches, struts or similar motion hardware.
  • Demonstrated hands on CAD ownership. You built the geometry yourself and can walk through the decisions in it.
  • Working knowledge of injection molding and sheet metal manufacturing processes and their design constraints.
  • Experience with GD&T, tolerance stack analysis, DFMEA and DVP&R.
  • Supplier facing experience through tooling, build and launch.
  • Ability to work onsite in Long Beach.

Responsibilities

  • Own exterior mechanism components end to end, from concept and packaging through design, validation and production launch.
  • Design and release hinges, latches, strikers, check links, gas struts and spindle drives, actuators, cables and linkage systems, working to opening and closing effort targets, cycle life and load cases.
  • Build and maintain your own CAD in 3DX and CATIA. Develop kinematic studies, motion envelopes, swing paths, tolerance stacks and clearance to surrounding structure, sheet metal and trim.
  • Define and drive DFMEA, DVP&RT, and test plans. Work with test and validation teams to close open items and document compliance evidence.
  • Apply design for manufacturing across injection molded, sheet metal and stamped components, including draft, gate and parting line strategy, tooling feasibility, and forming and weld constraints.
  • Source and manage suppliers through the full development cycle: technical reviews, design gates, tooling kickoff, PPAP support, and issue resolution on their side and ours.
  • Support prototype and pilot builds hands on. Be at the vehicle, find the root cause, and drive the change through release.
  • Coordinate with Studio, Body, Closures, Interiors, Electrical and Manufacturing to hold design intent while resolving competing requirements.
  • Manage part release, change actions and BOM accuracy through the program’s PLM and change control process.

Skills

Mechanical design
CAD ownership
DFMEA
DVP&R

Education

Bachelor's degree in Mechanical Engineering

Tools

3DX
CATIA V6
GD&T

Job description

We're ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life-from advancing space exploration and life‑saving medical devices to building autonomous electric vehicles. With 3,000+ experts across North America, we partner with leading companies in aerospace, medical devices, robotics, automotive, commercial vehicles, EVs, rail, and more.

As part of the global ALTEN Group-57,000+ engineers in 30 countries-we deliver across the entire product development cycle, from consulting to full project outsourcing.

When you join ALTEN Technology USA, you'll collaborate on some of the world’s toughest engineering challenges, supported by mentorship, career growth opportunities, and comprehensive benefits. We take pride in fostering a culture where employees feel valued, supported, and inspired to grow.

Workplace: On-site, 4 days per week. Friday, Remote. Location: Long Beach, CA

Responsibilities
  • Own exterior mechanism components end to end, from concept and packaging through design, validation and production launch.
  • Design and release hinges, latches, strikers, check links, gas struts and spindle drives, actuators, cables and linkage systems, working to opening and closing effort targets, cycle life and load cases.
  • Build and maintain your own CAD in 3DX and CATIA. Develop kinematic studies, motion envelopes, swing paths, tolerance stacks and clearance to surrounding structure, sheet metal and trim.
  • Define and drive DFMEA, DVP&R, and test plans. Work with test and validation teams to close open items and document compliance evidence.
  • Apply design for manufacturing across injection molded, sheet metal and stamped components, including draft, gate and parting line strategy, tooling feasibility, and forming and weld constraints.
  • Source and manage suppliers through the full development cycle: technical reviews, design gates, tooling kickoff, PPAP support, and issue resolution on their side and ours.
  • Support prototype and pilot builds hands on. Be at the vehicle, find the root cause, and drive the change through release.
  • Coordinate with Studio, Body, Closures, Interiors, Electrical and Manufacturing to hold design intent while resolving competing requirements.
  • Manage part release, change actions and BOM accuracy through the program’s PLM and change control process.
Required Qualifications
  • Bachelor's degree in Mechanical Engineering or a related discipline.
  • 5 or more years of automotive or comparable product development experience owning mechanical components through launch.
  • Direct design and release experience on mechanisms, linkages, hinges, latches, struts or similar motion hardware.
  • Demonstrated hands on CAD ownership. You built the geometry yourself and can walk through the decisions in it.
  • Working knowledge of injection molding and sheet metal manufacturing processes and their design constraints.
  • Experience with GD&T, tolerance stack analysis, DFMEA and DVP&R.
  • Supplier facing experience through tooling, build and launch.
  • Ability to work onsite in Long Beach.
Preferred Qualifications
  • Experience on a clean sheet or startup vehicle program where the process was still being defined.
  • Closures, exterior trim or accessories commodity background.
  • 3DX and CATIA V6 proficiency.
  • Kinematic simulation, motion analysis or CAE experience beyond basic modeling.
  • Vehicle launch experience at a plant, including build support, issue tracking and containment.
  • Exposure to power closure systems, sensors or ADAS component integration into exterior surfaces.
Salary Range
  • $125,000 - 140,000
  • The actual salary offered is dependent on various factors including, but not limited to, location, the candidate’s combination of job-related knowledge, qualifications, skills, education, training, and experience

All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, genetic information, or pregnancy.

Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans' Readjustment Assistance Act (VEVR

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Exterior Mechanisms Engineer
Exterior Mechanisms Engineer

ALTEN Technology USA • Long Beach (CA)

Hybrid
USD 125,000 - 140,000
On-site work
Remote Fridays
Exterior Trim Design Release Engineer
Exterior Trim Design Release Engineer

altentechnologyusa • Long Beach (CA)

Hybrid
USD 120,000 - 140,000
Exterior Door Lashes - Design Release Engineer
Exterior Door Lashes - Design Release Engineer

ALTEN Technology USA • Auburn Hills (MI)

On-site
USD 90,000 - 120,000
Exterior Mechanisms Engineer — CAD & Launch Owner
Exterior Mechanisms Engineer — CAD & Launch Owner

ALTEN Technology USA • Long Beach (CA)

Hybrid
USD 125,000 - 140,000
On-site work
Remote Fridays
Closures System Engineer
Closures System Engineer

ALTEN Technology USA • Long Beach (CA)

On-site
USD 120,000 - 140,000
Design Engineer Body Exterior - Trim (C-Pillar, D-Pillar, Roof, Tailgate, Spoiler, Wheel Arches[...]
Design Engineer Body Exterior - Trim (C-Pillar, D-Pillar, Roof, Tailgate, Spoiler, Wheel Arches[...]

ALTEN Technology USA • Long Beach (CA)

On-site
USD 115,000 - 135,000
Career growth opportunities
Comprehensive benefits
Mentorship support
Exterior Trim Design Release Engineer
Exterior Trim Design Release Engineer

ALTEN Technology USA • Long Beach (CA)

Hybrid
USD 120,000 - 140,000
Exterior Mechanisms Engineer for Automotive Vehicle Launch
Exterior Mechanisms Engineer for Automotive Vehicle Launch

altentechnologyusa • Long Beach (CA)

On-site
USD 125,000 - 140,000
Exterior Trim Design Release Engineer
Exterior Trim Design Release Engineer

Alten USA • Long Beach (CA)

On-site
USD 120,000 - 140,000
Senior Mechanical Design Engineer
Senior Mechanical Design Engineer

altentechnologyusa • Mukilteo (WA)

On-site
USD 135,000 - 165,000