Experienced Gate Welder

Neat Companies

Kentucky

In loco

USD 42.000 - 68.000

Tempo pieno

14 giorni+

Una candidatura completa in un minuto

Curriculum e lettera di presentazione personalizzati, pronti da inviare.

Supera i filtri ATS

Descrizione del lavoro

Neat Companies in Russell Springs, KY is seeking an Experienced Gate Welder to perform high-quality welding in a lean manufacturing environment. You will meet daily targets, set up and adjust equipment, and ensure safety and quality standards are followed to maintain a right-first-time workflow.

The role requires 1–3+ years gate welding, attention to detail, and teamwork with strong communication skills. Welding certification is preferred or obtainable, with opportunities to contribute to Kaizen

Competenze

  • High school diploma or GED preferred.
  • Welding certification (MIG, TIG, Stick) preferred or ability to obtain.
  • 1–3+ years of gate welding experience.
  • Strong attention to detail and craftsmanship.
  • Knowledge of welding techniques and equipment.
  • Commitment to safety and quality standards.
  • Ability to follow standard work consistently.
  • Problem-solving mindset and willingness to improve processes.
  • Team-oriented with solid communication skills.

Mansioni

  • Perform welding operations according to standardized work instructions, prints, and specifications.
  • Meet daily production targets for throughput and schedule attainment.
  • Set up and adjust welding equipment to ensure optimal performance.
  • Escalate abnormalities in materials, equipment, or processes through defined channels.
  • Follow all safety procedures, PPE requirements, and welding safety standards.
  • Conduct pre-use equipment checks and ensure proper machine operation.
  • Maintain a clean and organized work area (5S).
  • Identify and report unsafe conditions, near misses, and incidents.
  • Produce welds that meet all quality standards and customer requirements.
  • Perform visual inspections and verify weld integrity.
  • Identify defects and stop production when quality issues arise.
  • Participate in root cause analysis and corrective actions.
  • Maintain a right-first-time mindset.
  • Complete work in alignment with takt time and production schedules.
  • Support flow by minimizing rework and delays.
  • Communicate any risks to delivery or production targets immediately.
  • Assist with maintaining consistent throughput.
  • Minimize scrap, rework, and material waste.
  • Use proper techniques to improve weld efficiency and reduce cycle time.
  • Maintain equipment to prevent downtime and inefficiencies.
  • Support productivity improvements through adherence to standard work.
  • Ensure proper use and handling of materials to prevent excess waste.
  • Support WIP control and minimize overproduction.
  • Maintain organization of materials and finished goods.
  • Maintain 5S standards in the work area.
  • Follow and improve standardized work processes.
  • Identify waste and suggest improvements to welding methods or workflow.
  • Participate in Kaizen events and continuous improvement initiatives.
  • Support visual management and Daily Management System activities.
  • Participate in Daily Management meetings.
  • Follow Leader Standard Work expectations from the Team Leader.
  • Take ownership of individual performance and quality output.
  • Support team goals and collaborate with peers to solve problems.

Conoscenze

Attention to detail
Craftsmanship
Teamwork/Communication
Problem solving
Safety awareness
Standard work adherence
Welding techniques knowledge
Quality-focused mindset

Formazione

High school diploma or GED
Welding certification (MIG/TIG/Stick) preferred

Strumenti

MIG welding
TIG welding
Stick welding

Descrizione del lavoro

Experienced Gate Welder# Experienced Gate WelderHot JobManufacturing - Russell Springs, KY 42642## .**Summary:**The Experienced Gate Welder is responsible for performing high-quality welding operations to meet production and customer requirements in a lean manufacturing environment. This role supports plant SQDCI objectives by ensuring safe work practices, adherence to standard work, consistent quality, and efficient production flow while actively contributing to continuous improvement initiatives.**Key Responsibilities:****Daily Operations & Execution*** Perform welding operations according to standardized work instructions, prints, and specifications* Meet daily production targets for throughput and schedule attainment* Set up and adjust welding equipment to ensure optimal performance* Escalate abnormalities in materials, equipment, or processes through defined channels**Safety (S)*** Follow all safety procedures, PPE requirements, and welding safety standards* Conduct pre-use equipment checks and ensure proper machine operation* Maintain a clean and organized work area (5S) to reduce hazards* Identify and report unsafe conditions, near misses, and incidents* Support a zero-incident safety culture**Quality (Q)*** Produce welds that meet all quality standards, specifications, and customer requirements* Perform visual inspections and verify weld integrity* Identify defects and stop production when quality issues arise* Participate in root cause analysis and corrective actions* Maintain a “right-first-time” mindset**Delivery (D)*** Complete work in alignment with takt time and production schedules* Support flow by minimizing rework and delays* Communicate any risks to delivery or production targets immediately* Assist with maintaining consistent throughput**Cost (C) & Productivity*** Minimize scrap, rework, and material waste* Use proper techniques to improve weld efficiency and reduce cycle time* Maintain equipment to prevent downtime and inefficiencies* Support productivity improvements through adherence to standard work**Inventory (I)*** Ensure proper use and handling of materials to prevent excess waste* Support WIP control and minimize overproduction* Maintain organization of materials and finished goods**Lean Manufacturing & Continuous Improvement*** Maintain 5S standards in the work area* Follow and improve standardized work processes* Identify waste and suggest improvements to welding methods or workflow* Participate in Kaizen events and continuous improvement initiatives* Support visual management and Daily Management System activities**Accountability & Team Participation*** Participate in Daily Management meetings* Follow Leader Standard Work expectations from the Team Leader* Take ownership of individual performance and quality output* Support team goals and collaborate with peers to solve problems* Other duties as assigned**Qualifications and Experience:*** High school diploma or GED preferred* Welding certification (MIG, TIG, Stick as applicable) preferred or ability to obtain* 1–3+ years of experienced gate welding experience* Strong attention to detail and craftsmanship* Knowledge of welding techniques and equipment* Commitment to safety and quality standards* Ability to follow standard work consistently* Problem-solving mindset and willingness to improve processes* Team-oriented with solid communication skills**Work Environment & Physical Requirements:*** Manufacturing environment with exposure to welding fumes, heat, and equipment* Requires standing, lifting, and repetitive motion* Use of PPE including welding helmet, gloves, and protective clothing required**What Success Looks Like:*** Consistent production of high-quality welds with minimal defects* Safe work practices with zero incidents* Reliable contribution to production targets and flow* Strong adherence to standard work and lean principles* Active participation in continuous improvement
Ottieni la revisione del curriculum gratis e riservata.

o trascina qui il file.

Similar jobs

Offerte di lavoro simili che vale la pena confrontare

Senior Gate Welder - Lean Manufacturing Expert
Senior Gate Welder - Lean Manufacturing Expert

Neat Companies • Kentucky

In loco
USD 42.000 - 68.000
Welder | 1st Shift
Welder | 1st Shift

Viking Corp • Kansas City (MO)

In loco
USD 25.000 - 36.000
Welder
Welder

TAMPA BRASS & ALUMINUM • Tampa (FL)

In loco
USD 22.000 - 34.000
Welder | 2nd Shift
Welder | 2nd Shift

Viking Corp • Phoenix (AZ)

In loco
USD 30.000 - 41.000
Structural Fabrication Lead Welder/Fitter
Structural Fabrication Lead Welder/Fitter

Plank Manufacturing Enterprises • Eau Claire (WI)

In loco
USD 65.000 - 85.000
Code Welder **$2,500 SIGN ON BONUS**
Code Welder **$2,500 SIGN ON BONUS**

Cimarron • Newcastle (OK)

In loco
USD 42.000 - 65.000
Sign-on bonus
Welder
Welder

JBT Marel Corporation • Sandusky (OH)

In loco
USD 28.000 - 44.000
6G Pipe Welder - Day Shift; $29 - $35 per hour
6G Pipe Welder - Day Shift; $29 - $35 per hour

Westerman, Inc • Catoosa (OK)

In loco
USD 33.000 - 47.000
401(k) matching
Health insurance
Health Savings Account
+7
Manufacturing MIG Fabrication Specialist
Manufacturing MIG Fabrication Specialist

JLG Ind. • Greencastle

In loco
USD 25.000 - 39.000
Welder | 2nd Shift
Welder | 2nd Shift

Viking Corp • Doraville (GA)

In loco
USD 25.000 - 39.000