Engineer, Tooling-CNC Programming

GKN Aerospace company

Garden Grove (CA)

On-site

USD 90,000 - 130,000

Full time

12 days ago

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

GKN Aerospace seeks an experienced CNC Programmer to create, verify, and optimize multi-axis programs for aerospace components at the Garden Grove facility. You will simulate, prove-out, and document programs across Fadal, Heian, Onsrud, Thermwood, and Zimmerman machines, ensuring safety and conformance.

You will collaborate with Manufacturing Engineering, Operations, Quality, Tooling, and Maintenance to push capability, reliability, and process improvements while maintaining strict revision

Qualifications

  • Associate degree or six years of directly relevant CNC programming experience.
  • Five+ years of CNC programming experience supporting aerospace components in regulated environments.
  • Proficiency in multi-axis CAM programming, machine simulation and verification, and post-processed code review.
  • Experience with CATIA and/or Siemens NX; Teamcenter or equivalent PDM; VERICUT or similar.
  • Ability to interpret drawings and GD&T, select tools and strategies, and create complete shop-floor documentation.

Responsibilities

  • Plan, create, verify, revise, and optimize machine-control data for multi-axis equipment.
  • Develop safe and efficient toolpaths using CAM methods; perform simulations and post-processing checks.
  • Create and maintain shop-floor documentation, setup sheets, and revision histories.
  • Choose machining strategies, tooling, feeds, speeds, and probing approaches per process requirements.
  • Participate in machine prove-outs, production introduction, and documentation of results.
  • Diagnose programming issues and provide structured troubleshooting across machines and shifts.
  • Collaborate with Quality, Manufacturing Engineering, Tooling, Maintenance, and external partners.
  • Lead root-cause analysis for programming losses and implement corrective actions.
  • Work on-site in a manufacturing environment and support production schedule.

Skills

CNC programming
Multi-axis CAM programming
Toolpath optimization
GD&T interpretation

Education

Associate degree in CNC programming or related field
6+ years CNC programming experience in lieu of degree

Tools

Fadal
Heian
Onsrud
Thermwood
Zimmerman
CATIA
Siemens NX
VERICUT

Job description

Fantastic challenges. Amazing opportunities.

GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, we’re inspired by the opportunities to innovate and break boundaries. We’re proud to play a part in protecting the world’s democracies. And we’re committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees across 32 manufacturing sites in 12 countries we serve over 90% of the world’s aircraft and engine manufacturers and achieved sales of £3.6bn in 2025. There are no limits to where you can take your career.

Job Summary

Create, verify, release, and continuously improve controlled CNC programs that safely and repeatedly produce conforming aerospace components, tools, and fixtures at the Garden Grove facility.

Provide hands-on programming expertise across the Fadal, Heian, Onsrud, Thermwood, and Zimmerman machine fleet, using disciplined simulation, prove-out, documentation, and revision-control practices.

Partner with Manufacturing Engineering, Operations, Quality, Tooling, Maintenance, and approved external specialists to improve machining capability while maintaining clear technical-authority and escalation boundaries.

Job Responsibilities
1. Safety, Compliance and Technical Control
  • Apply a safety-first approach to CNC programming, simulation, prove-out, program changes, and shop-floor support; stop and elevate work when conditions could compromise people, equipment, product, tooling, or the environment.
  • Follow approved program naming, access, review, release, archive, backup, emergency-change, and revision-control requirements; verify that the shop-floor program matches the approved revision before production use.
  • Protect export-controlled, proprietary, customer, and company information and follow all applicable site security, quality, environmental, health, and safety requirements.
  • Perform work within assigned authority and elevate proprietary-control, machine-parameter, safety, quality, process-approval, or technical-authority decisions to the appropriate owner.
2. CNC Programming, Simulation and Documentation
  • Plan, create, verify, revise, and optimize machine-control data for multi-axis equipment used to manufacture and inspect complex aerospace parts, tools, and fixtures.
  • Develop safe and efficient toolpaths using approved CAM methods; complete machine simulation, collision and clearance checks, post-processed code review, and required peer or technical review before release.
  • Create and maintain complete shop-floor documentation, including setup sheets, tool lists, workholding and work-offset information, probing routines, operator notes, and revision history.
  • Select or recommend machining strategies, cutting tools, feeds, speeds, workholding, and probing approaches consistent with approved process requirements and machine capability.
3. Prove-Out, Production Support and Problem Solving
  • Participate in controlled machine prove-outs, first-piece activities, and production introduction; document results, required changes, residual risks, and release evidence.
  • Diagnose CNC program, post-processor, probing, simulation, setup-documentation, and revision issues using drawings, models, machine evidence, inspection results, and structured problem-solving methods.
  • Provide structured support across assigned machines and shifts; communicate status, containment, risk, recovery needs, and escalation clearly through the machining operating cadence.
  • Lead or support root-cause analysis for recurring programming-related losses and implement verified corrective actions within authorized scope.
4. Quality, Qualification and Configuration Management
  • Partner with Quality and Manufacturing Engineering on producibility, measurement strategy, first article inspection, process qualification, and acceptance of new or revised programs.
  • Ensure CNC programs and associated records support applicable drawing, GD&T, traceability, configuration, customer, and aerospace quality requirements.
  • Support containment and correction of programming-related nonconformances without bypassing independent Quality authority or required approval processes.
  • Preserve objective evidence needed to demonstrate program verification, prove-out completion, qualification, revision status, and production readiness.
5. Continuous Improvement and Standardization
  • Improve first-pass quality, repeatability, cycle time, tool life, setup effectiveness, and machine utilization while following required change-control and process-approval practices.
  • Develop and maintain reusable programming templates, machining methods, post-processor knowledge, tool libraries, checklists, and lessons learned.
  • Use data and practical Lean methods to identify recurring losses, reduce variation and waste, and sustain verified improvements in standard work.
  • Maintain visibility of the assigned programming backlog and communicate priorities, technical risk, dependencies, completion evidence, and needed escalation.
6. Machine Industrialization and Knowledge Transfer
  • Support Zimmerman and future machine industrialization, including post-processor readiness, program development, simulation, prove-out, tooling interfaces, probing, qualification evidence, operator support, and production handoff.
  • Coordinate with equipment OEMs and approved external specialists while ensuring that decisions, methods, files, and lessons learned are documented and transferred to designated internal owners.
  • Coach programmers, engineers, leads, and qualified operators on approved programming practices, safe program use, troubleshooting boundaries, and escalation requirements.
  • Collaborate effectively across Operations, Manufacturing Engineering, Quality, Tooling, Maintenance, Planning, EH&S, and external technical partners.
Job Qualifications
  • Associate degree in CNC programming, manufacturing technology, engineering technology, or a related technical field, or six years of directly relevant CNC programming experience in lieu of the degree.
  • Five or more years of CNC programming experience supporting complex, tight-tolerance components in aerospace, defense, or another regulated precision-manufacturing environment.
  • Demonstrated proficiency in multi-axis CAM programming, machine simulation and verification, collision avoidance, post-processed code review, and machine prove-out.
  • Working proficiency with CATIA and/or Siemens NX; Teamcenter or an equivalent product-data and configuration-control system; and VERICUT or equivalent CNC verification software.
  • Ability to interpret engineering drawings and models, apply GD&T, select appropriate cutting tools and machining strategies, and create complete shop-floor documentation.
  • Demonstrated ability to troubleshoot CNC programs, post processors, probing routines, simulations, setups, and revision issues using evidence and controlled problem-solving methods.
  • Ability to work independently, manage multiple programming priorities, communicate technical risk clearly, and collaborate with Operations, Engineering, Quality, Tooling, Maintenance, equipment OEMs, and external specialists.
  • Ability to work on-site in an active manufacturing environment and support the schedule required for assigned production, prove-outs, and machine introductions.
  • Must be legally authorized to work in the United States. Where the position requires access to export-controlled information or items, the employee must be eligible for such access under applicable U.S. export-control requirements or receive any required authorization.
Preferred Qualifications
  • Hands-on machining, setup, and prove-out experience on large-format, 5-axis, gantry, router, or comparable equipment.
  • Experience with Fadal, Heian, Onsrud, Thermwood, Zimmerman, or comparable machine and control platforms.
  • Experience developing, tuning, or validating post processors and automated probing routines, including Renishaw or equivalent systems.
  • Experience with AS9100-based manufacturing systems, aerospace first article inspection, AS9102 documentation, process qualification, change control, and configuration management.
  • Experience machining acrylic, polycarbonate, composite structures, aluminum, titanium, or other materials relevant to aerospace transparency and structural-component manufacturing.
  • Experience standardizing CAM templates, tool libraries, digital work instructions, setup documentation, or knowledge-reuse systems.
  • Basic scripting or automation experience, such as Python, VB, macros, or CAM customization.
  • Experience supporting new machine installation, acceptance, industrialization, or transfer from an external specialist to an internal production team.

We’ll offer you fantastic challenges and amazing opportunities. This is your chance to be part of an organisation that has proven itself to be at the cutting edge of our industry; and is committed to pushing the boundaries even further. And with some of the best training on offer in the industry, who knows how far you can go?

A Great Place to work needs a Great Way of Working

Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles we’ve created a culture where everyone feels welcome to contribute. It’s a culture that won us ‘The Best Workplace Culture Award’. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work.

We’re also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know.

We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Operator - Non-Certified (2nd Shift)
Operator - Non-Certified (2nd Shift)

GKN Aerospace company • Newington (CT)

On-site
USD 51,000 - 64,000
Comprehensive benefits package
Performance-based bonus program
Operator - Non-Certified (2nd Shift)
Operator - Non-Certified (2nd Shift)

GKN Aerospace • Newington (CT)

On-site
USD 51,000 - 64,000
Medical insurance
Dental insurance
Vision insurance
+3
Operator - Non-Certified (2nd Shift)
Operator - Non-Certified (2nd Shift)

GKN Aerospace company • Newington (CT)

On-site
USD 51,000 - 64,000
Sr. Manufacturing Engineer, Configuration Control
Sr. Manufacturing Engineer, Configuration Control

GKN Aerospace • Tallassee (AL)

On-site
USD 90,000 - 120,000
CNC Machine Operator - (3rd Shift)
CNC Machine Operator - (3rd Shift)

GKN Aerospace • North Charlestown (NH)

On-site
USD 38,000 - 52,000
Technician -Tooling - Weekend Shift (Friday-Sunday, 6:00 AM to 6:00 PM)
Technician -Tooling - Weekend Shift (Friday-Sunday, 6:00 AM to 6:00 PM)

GKN Aerospace company • El Cajon (CA)

On-site
USD 73,000 - 83,000
Manufacturing Engineering Director, Site
Manufacturing Engineering Director, Site

GKN Aerospace company • United States

On-site
USD 180,000 - 260,000
Fabricator - Non-Certified
Fabricator - Non-Certified

GKN Aerospace • Phoenix (AZ)

On-site
USD 25,000 - 39,000
Technology Project Manager
Technology Project Manager

GKN Aerospace • Westlake (TX)

On-site
USD 90,000 - 130,000
Machinist - Non-Certified
Machinist - Non-Certified

GKN Aerospace • Wellington (KS)

On-site
USD 42,000 - 64,000