Engineer

UG2

Sacramento (CA)

On-site

USD 70,000 - 90,000

Full time

45 hours ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

UG2 in Sacramento, CA seeks an Engineer to operate, maintain and repair building systems, boilers, HVAC, electrical and plumbing. The role requires hands-on troubleshooting, CMMS work, and adherence to safety policies.

You will perform routine maintenance, coordinate with vendors, manage inventory and support life-safety systems. A minimum of two years of engineering experience and strong communication are essential.

Qualifications

  • Minimum two years of engineering experience required.
  • Strong communication and customer service skills.
  • Good organizational abilities and attention to safety procedures.
  • Ability to lift heavy equipment and stand for extended periods.
  • Willingness to learn and adapt to new technologies.
  • Weekly Fire Pump Test Certification preferred.

Responsibilities

  • Operate, maintain and repair boilers, pumps, valves, and lines for steam and hot water distribution.
  • Maintain refrigerant systems, air conditioning, and related components and comply with environmental regulations.
  • Service pumps, brines, water treatment equipment, and piping systems.
  • Operate and maintain electrical motors, controls, VFDs, and associated instrumentation.
  • Maintain building automation, HVAC, lighting, plumbing, and life-safety systems.
  • Manage parts inventory and support facility security and access controls.
  • Perform routine maintenance and minor repairs and assist with CMMS work orders.
  • Support safety programs and ensure compliance with federal, state, and local regulations.

Skills

Engineering experience
Communication
Customer service
Organizational skills
Physical stamina

Job description

Job Responsibilities

The

  • Operation, maintenance and minor repairs of all boilers, heaters pumps, valves, appurtenances, and lines used in the distribution of steam and heated or processed water.
  • Operation, maintenance and minor repairs of refrigerant compressors, condensers, evaporators, traps, transfer pumps, expansion valves, stop valves and float valves, together with all refrigerant lines and devices used to control temperature, and air conditioning systems in their entirety, including the use of approved recovery equipment and processes to comply with the law.
  • Operation, maintenance, and minor repairs of pumps handling brines or other secondary refrigerating liquids, including water, together with all valves, appurtenances and lines used in the system.
  • Operation, maintenance, and minor repairs of air compressors, together with distribution lines and all valves and devices for air control, including air dryer and filtering and separating systems.
  • Operation, maintenance, and minor repairs of all natural and manufactured gas distribution lines, including all valves and devices for their distribution, regulation, and control.
  • Operation, maintenance and minor repairs of water filters, softeners, piping, expansion tanks, and pumps used in conjunction with water distribution, including all sinks and toilet bowls, including all supply lines, drains, water lines, control devices and sprinkler systems.
  • Operating, maintenance and minor repairs of all types of electrical motors and engines used to power pumps, compressors, generators, and fans.
  • All electrical/control systems work and minor repairs including circuit diagnostics tracing and troubleshooting, operating, maintaining, and minor repairing all motor controls and related equipment drivers such as variable frequency drives (VFD’s).
  • Tools considered as necessary to be fulfillment of the duties of the engineer shall include those which may be required in the performance of his duties, including such types of special equipment necessary to operate, maintain and repair the equipment listed.
  • Operation, maintenance, and minor repairs of all fuel oil systems including piping, pumps, valves, strainers, filters, floats, separators, lines, and controls.
  • Operation, maintenance and minor repairs of building automation systems for HVAC, lighting, and other controlled mediums, including consoles, data gathering panels, remote sensors and indicating devices.
  • Operation, maintenance and minor repairs of piping and domestic plumbing and sanity sewer systems, sump pumps including basins and sumps, grease traps, water closets, urinals, flush valves, angle stops and piping. This includes clearing blockages in fixtures and lines as needed and on a preventative basis as well.
  • Maintenance and minor repairs of trash/recycling/composting/bailing compactors, including electrical and hydraulic systems.
  • Maintenance and minor repairs of all kitchen equipment excluding tenant owned equipment.
  • Operating, maintenance and minor repairs of all Safety related equipment, including support of testing for life safety related equipment.
  • Inventory control for parts and materials required to perform such maintenance and minor repairs to the building systems.
  • Equipment room maintenance and minor repairs to maintain the physical condition and appearance of these rooms and equipment located within them.
  • Perform minor repairs on furniture and floors.
  • Operates and maintains locksmithing log and performs general locksmithing within the facility.
  • Has a general understanding of building design and construction procedures.
Job Responsibilities

The Engineer will comply with all federal, state, local laws, and regulations as well as the Employer’s safety policies and directives. The engineers will perform any or all of the following skilled and technical duties but not necessarily limited to performing work under a work order or computerized maintenance management system (CMMS), operating or assisting in operating all heating and ventilation and air conditioning equipment, engines, turbines, motors, combustion engines, pumps, air compressors, ice and refrigerating machines, air conditioning units, filters, dryers, fans, siphons, also automatic and power-oiling pumps and engines, as well as other such normal or evolved building systems as installed within the building(s), more specifically described as follows:

  • Operation, maintenance and minor repairs of all boilers, heaters pumps, valves, appurtenances, and lines used in the distribution of steam and heated or processed water.
  • Operation, maintenance and minor repairs of refrigerant compressors, condensers, evaporators, traps, transfer pumps, expansion valves, stop valves and float valves, together with all refrigerant lines and devices used to control temperature, and air conditioning systems in their entirety, including the use of approved recovery equipment and processes to comply with the law.
  • Operation, maintenance, and minor repairs of pumps handling brines or other secondary refrigerating liquids, including water, together with all valves, appurtenances and lines used in the system.
  • Operation, maintenance, and minor repairs of air compressors, together with distribution lines and all valves and devices for air control, including air dryer and filtering and separating systems.
  • Operation, maintenance, and minor repairs of all natural and manufactured gas distribution lines, including all valves and devices for their distribution, regulation, and control.
  • Operation, maintenance and minor repairs of water filters, softeners, piping, expansion tanks, and pumps used in conjunction with water distribution, including all sinks and toilet bowls, including all supply lines, drains, water lines, control devices and sprinkler systems.
  • Operating, maintenance and minor repairs of all types of electrical motors and engines used to power pumps, compressors, generators, and fans.
  • All electrical/control systems work and minor repairs including circuit diagnostics tracing and troubleshooting, operating, maintaining, and minor repairing all motor controls and related equipment drivers such as variable frequency drives (VFD’s).
  • Tools considered as necessary to be fulfillment of the duties of the engineer shall include those which may be required in the performance of his duties, including such types of special equipment necessary to operate, maintain and repair the equipment listed.
  • Operation, maintenance, and minor repairs of all fuel oil systems including piping, pumps, valves, strainers, filters, floats, separators, lines, and controls.
  • Operation, maintenance and minor repairs of building automation systems for HVAC, lighting, and other controlled mediums, including consoles, data gathering panels, remote sensors and indicating devices.
  • Operation, maintenance and minor repairs of piping and domestic plumbing and sanity sewer systems, sump pumps including basins and sumps, grease traps, water closets, urinals, flush valves, angle stops and piping. This includes clearing blockages in fixtures and lines as needed and on a preventative basis as well.
  • Maintenance and minor repairs of trash/recycling/composting/bailing compactors, including electrical and hydraulic systems.
  • Maintenance and minor repairs of all kitchen equipment excluding tenant owned equipment.
  • Operating, maintenance and minor repairs of all Safety related equipment, including support of testing for life safety related equipment.
  • Inventory control for parts and materials required to perform such maintenance and minor repairs to the building systems.
  • Equipment room maintenance and minor repairs to maintain the physical condition and appearance of these rooms and equipment located within them.
  • Perform minor repairs on furniture and floors.
  • Operates and maintains locksmithing log and performs general locksmithing within the facility.
  • Maintains doors.
  • Has a general understanding of building design and construction procedures.
Qualifications
  • Minimum of two (2) years of Engineering experience
  • Must have a working knowledge of all tools and equipment.
  • Must have general hands-on knowledge of both maintenance and repair procedures.
  • The ability to lift heavy equipment.
  • The ability to stand for extended periods of time.
  • Excellent organizational skills.
  • Effective communication skills.
  • Exceptional customer service skills
  • Written and verbal communication skills to provide quality customer service.
  • Ability to learn and adapt to technological advances.
  • Weekly Fire Pump Test Certification
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Stationary Engineer
Stationary Engineer

UG2 • San Francisco (CA)

On-site
USD 85,000 - 125,000
Building Engineer
Building Engineer

ABM • Las Vegas (NV)

Hybrid
USD 39,000 - 55,000
Lead Operating Engineer
Lead Operating Engineer

Cushman & Wakefield • Bestgate Terrace (MD)

On-site
USD 65,000 - 90,000
Building Engineer
Building Engineer

Telnet, Inc. • Pleasanton (CA)

On-site
USD 90,000 - 120,000
Building Engineer
Building Engineer

Foundry-Commercial • Fort Lauderdale (FL)

On-site
USD 70,000 - 90,000
Building Engineer
Building Engineer

ABM Industries • Phoenix (AZ)

On-site
USD 50,000 - 75,000
Maintenance/ Engineer 1
Maintenance/ Engineer 1

Nevada Regional Medical Center • Nevada (MO)

On-site
USD 19,229 - 27,388
Building Engineer
Building Engineer

Able Services • Las Vegas (NV)

On-site
USD 55,000 - 85,000
Building Engineer
Building Engineer

UG2 • Seattle (WA)

On-site
USD 65,000 - 95,000
Lead Operating Engineer
Lead Operating Engineer

C&W Services (S) • Atlanta (GA)

On-site
USD 70,000 - 110,000