Embedded Software Engineer, Motor Control & Real-Time Systems

generalmatter

Los Angeles (CA)

On-site

USD 110,000 - 170,000

Full time

14 days+

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

General Matter is seeking an Embedded Software Engineer to develop real-time control software, motor drive firmware, and device drivers that directly command test stands and production systems. This role sits at the intersection of real-time embedded engineering and motor control, turning control algorithms into deterministic, fault-tolerant code for high-rate loops.

You will help define the real-time architecture, driver standards, and hardware interfaces across R&D, manufacturing, and plant

Qualifications

  • Bachelor's degree in a STEM field.
  • 5+ years in embedded real-time software.
  • Proven portfolio or projects.
  • Strong production-level experience in C/C++/Rust.
  • Experience with motor control firmware (FOC, sensorless, PWM).
  • Solid grounding in control fundamentals and real hardware.

Responsibilities

  • Architect and develop deterministic, safety-critical control software on real-time Linux and embedded targets.
  • Define real-time architecture, driver standards, and hardware interface conventions.
  • Implement motor control algorithms (FOC, sensorless, high-rate control).
  • Develop low-level drive firmware for PWM, ADC, and sensing.
  • Implement estimation, monitoring, and protection functions for safety and reliability.
  • Build and maintain fieldbus stacks for distributed actuators and I/O.
  • Write drivers/interfaces for instrumentation and data acquisition hardware.
  • Own software from development through deployment with SIL/HIL frameworks.

Skills

Embedded systems
Real-time software
C/C++/Rust
Motor control firmware
Control theory basics
Hardware/software integration

Education

Bachelor's degree in STEM

Job description

About the Company

General Matter enriches uranium.

We are designing, building, and operating the world's lowest-cost enrichment services, here in the US.

In the process, we are restoring America's ability to produce nuclear fuel to power AI, advanced manufacturing and critical industries our country relies on to remain competitive.

Fuel drives the cost of advanced reactor electricity production, and enrichment drives the cost of the fuel that advanced reactors consume. Reliable, low-cost enrichment is the catalyst for the nuclear Renaissance now under way.

Our mission is to make nuclear not only the cleanest and safest source of baseload power, but also the most affordable. We believe abundant nuclear energy will lead to a post-scarcity society.

We were incubated inside Founders Fund, like Anduril and Palantir before us, and are backed by over a dozen of the world's top venture capital firms.

Our lean, world-class team of engineers and operators is applying a first-principles approach to solving the problem of nuclear fuel production.

We are a mission-driven company with a culture of urgency, accountability, and transparency.

Help us build a high-energy society by making the cleanest, safest form of baseload energy the most affordable.

About This Role

We are seeking an Embedded Software Engineer to develop the real-time control software, motor drive firmware, and device drivers that directly command test stands and production systems. This role sits where real-time embedded engineering meets motor control. You'll turn control algorithms into deterministic, fault-tolerant code that closes high-rate control loops, drives power electronics, coordinates distributed actuators over fieldbus networks, and acquires high-speed signals from scientific instrumentation. Safety and accuracy matter enormously in all of it. You will help define the real-time architecture, driver standards, and hardware interfaces of mission-critical embedded systems across R&D, manufacturing/test, and plant operations, working hands-on with hardware from early prototypes through deployed systems. If you seek high impact and are excited by fast-paced, intense, Skunkworks-style projects, we encourage you to apply to join our team.

Responsibilities
  • Architect and develop deterministic, safety-critical control software on real-time Linux (e.g., PREEMPT_RT) and embedded microcontroller/DSP targets, including scheduling, timing, and fault-tolerant control logic.
  • Define real-time architecture, driver standards, and hardware interface conventions shared across R&D, test, and production systems.
  • Implement and optimize motor control algorithms in embedded firmware, including field-oriented control, sensorless control, and high-rate closed-loop current and torque control.
  • Develop low-level drive firmware for PWM generation, synchronized ADC sampling, current and voltage sensing, and motor feedback interfaces for power electronics and inverters.
  • Implement estimation, monitoring, and protection functions (state and fault estimation, overcurrent and overvoltage protection) to maximize system safety and reliability.
  • Build and maintain industrial fieldbus masters and stacks (e.g., EtherCAT, CAN/CANopen, EtherNet/IP) for hard real-time, high-rate closed-loop control of distributed actuators, drives, and I/O.
  • Write drivers and interfaces for scientific instrumentation, sensors, and data acquisition hardware for high-speed, kHz-class acquisition across low-level protocols and buses (e.g., SPI, I2C, serial, USB, PCIe, Ethernet).
  • Own software from development through deployment by building automated build, test, and validation infrastructure, including software-in-the-loop (SIL) and hardware-in-the-loop (HIL) frameworks for motor control and real-time systems.
  • Perform safety analyses and validate control logic to ensure deterministic behavior, stability, and functional safety under both normal and fault conditions.
  • Contribute to integrated system testing, commissioning, and continuous improvement of embedded software running on production equipment.
Basic Qualifications
  • Bachelor's degree or higher in Computer Engineering, Electrical Engineering, Computer Science, or a related STEM field.
  • 5+ years of experience developing embedded, real-time, or low-level systems software.
  • Evidence of exceptional ability (prior projects, portfolio of work, completed products, etc.).
  • Strong, production-level experience in C, C++, or Rust.
  • Hands-on experience implementing motor control firmware for electric motors and drives, such as field-oriented control, sensorless control, PWM, and closed-loop current control.
  • Solid grounding in control fundamentals (linear systems, discrete-time control, digital filtering, and state estimation), deep enough to implement, tune, and debug control loops on real hardware.
  • Hands-on experience with real-time systems and hardware/software integration, with a strong understanding of deterministic timing, interrupt latency, conc
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Embedded Software Engineer, Motor Control & Real-Time Systems
Embedded Software Engineer, Motor Control & Real-Time Systems

General Matter • Los Angeles (CA)

On-site
USD 150,000 - 260,000
Stock options
Medical, vision & dental coverage
401(k) retirement plan
Embedded Software Engineer, Electronics Engineering
Embedded Software Engineer, Electronics Engineering

Nidec • United States

Remote
USD 140,000 - 180,000
Senior Robotics Firmware Engineer — Real-Time Motor Control
Senior Robotics Firmware Engineer — Real-Time Motor Control

Dexmate Inc. • Fremont (CA)

Hybrid
USD 150,000 - 190,000
Sr. Embedded Systems & Controls Software Engineer
Sr. Embedded Systems & Controls Software Engineer

Ryzen Solutions • Irvine (CA)

On-site
USD 120,000 - 170,000
Embedded Real-Time Motor Control Engineer
Embedded Real-Time Motor Control Engineer

General Matter, Inc. • Los Angeles (CA)

On-site
USD 150,000 - 260,000
Stock options
Medical, vision & dental coverage
401(k) retirement plan
Embedded Motor Controls Engineer
Embedded Motor Controls Engineer

Dexmate • Iowa

On-site
USD 90,000 - 140,000
Embedded Motor Controls Engineer, Robotics
Embedded Motor Controls Engineer, Robotics

Dexmate • Fremont (CA)

On-site
USD 120,000 - 170,000
Senior Firmware Engineer
Senior Firmware Engineer

SR2 • Austin (TX)

On-site
USD 120,000 - 180,000
Senior Embedded Software Engineer
Senior Embedded Software Engineer

Amazon Inc. • North Reading (MA)

On-site
USD 140,000 - 180,000
Embedded Motor Controls Engineer
Embedded Motor Controls Engineer

Dexmate • Fremont (CA)

On-site
USD 120,000 - 170,000