Embedded Camera Engineer

Efference

San Francisco (CA)

Vor Ort

USD 120.000 - 150.000

Vollzeit

14 Tage+

Eine vollständige Bewerbung in einer Minute

Maßgeschneiderter Lebenslauf und Anschreiben – versandbereit.

Schaffe es an den ATS-Filtern vorbei

Zusammenfassung

Efference is seeking an embedded camera software engineer to own the camera bring-up and low-level imaging pipeline across our devices. You will collaborate with electrical and imaging engineers to ensure sensor support and reliable frame timing for production deployments.

You will implement sensor drivers, integrate MIPI CSI-2 and Linux camera interfaces, and develop diagnostics and tests to validate timing, alignment, and frame integrity across hardware paths.

Qualifikationen

  • Experience with embedded camera software or low-level imaging pipelines.
  • Ability to read sensor datasheets and schematics.
  • Strong debugging across hardware and software boundaries.
  • Experience with Linux camera drivers and I2C/SPI control.

Aufgaben

  • Write and maintain sensor drivers and bring up camera modules on boards.
  • Integrate MIPI CSI-2 capture and Linux camera interfaces (V4L2, media graphs).
  • Implement exposure, gain, frame-rate, and synchronization controls with metadata.
  • Validate multi-camera timing and sensor-IMU alignment with instrumented measurements.
  • Optimize frame delivery via buffers and DMA; diagnose image issues and stalls.
  • Build sensor diagnostics and automated capture tests with ISP and production teams.

Kenntnisse

C/C++
Linux drivers
Hardware debugging
Camera imaging pipelines

Tools

device trees
MIPI CSI-2
V4L2
DMA-BUF
GStreamer

Jobbeschreibung

About the company

Efference provides high-performance perception and compute infrastructure for training and deploying robot models in the cloud. Our vision is to make robotic deployments scalable with shared compute.

We approach the problem by owning the entire path from the image sensor to the datacenter GPU. We shrink the load at the sensor, fix the uplink so robot traffic is fast and reliable, and clock synchronize the system so observations arrive time-aligned, ready for inference.

About the role

You'll own camera bring-up and the low-level software that turns sensor output into reliable, correctly timed frames. You'll work with electrical, embedded Linux, and imaging engineers to support new sensors and maintain the camera path across Efference devices.

What you’ll do
  • Write and maintain sensor drivers, configure register maps and operating modes, and bring up camera modules on prototype and production boards.
  • Integrate MIPI CSI-2 capture and Linux camera interfaces, including V4L2 subdevices, media graphs, and sensor-to-ISP control paths.
  • Implement exposure, gain, frame-rate, trigger, and synchronization controls, with accurate metadata describing when and how each frame was captured.
  • Validate multi-camera timing and camera/IMU alignment with instrumented measurements, including readout timing and timestamp behavior under load.
  • Optimize frame delivery through buffers and DMA paths; diagnose corrupted images, frame drops, stalls, bandwidth limits, and recovery after disconnects.
  • Build sensor diagnostics and automated capture tests, working with ISP and factory teams on calibration, acceptance testing, and production issues.
What we are looking for
  • Experience developing embedded camera software, sensor drivers, or low-level imaging pipelines.
  • Strong C/C++ skills and practical knowledge of Linux drivers, device trees, and hardware/software debugging.
  • Understanding of sensor timing, MIPI CSI-2, I2C/SPI control, and RAW/Bayer and YUV pixel formats.
  • Ability to read sensor datasheets, register maps, and schematics and verify behavior with lab instruments.
  • Experience isolating problems across the sensor, capture hardware, driver, and downstream image-processing path.
Nice to Have
  • Experience with global-shutter sensors, stereo cameras, external triggering, or camera/IMU synchronization.
  • Work with NVIDIA, Qualcomm, Ambarella, Rockchip, or similar camera SoCs and their vendor tooling.
  • Knowledge of ISP control loops, DMA-BUF, GStreamer, or factory camera calibration.
Hol dir deinen kostenlosen, vertraulichen Lebenslauf-Check.

oder ziehe deine Datei hierhin.

Similar jobs

Ähnliche Jobs, die dir auch gefallen könnten

Embedded Camera Systems Engineer
Embedded Camera Systems Engineer

Efference • San Francisco (CA)

Vor Ort
USD 120.000 - 150.000
Embedded Camera Systems Engineer (MIPI / ISP / SoC)
Embedded Camera Systems Engineer (MIPI / ISP / SoC)

Proception Inc. • Palo Alto (CA)

Vor Ort
USD 140.000 - 210.000
Competitive equity
Health coverage
Work on real robotic systems
+2
Embedded Linux Engineer
Embedded Linux Engineer

Efference • San Francisco (CA)

Vor Ort
USD 150.000 - 230.000
Optical Systems Engineer, Cameras
Optical Systems Engineer, Cameras

Efference • San Francisco (CA)

Vor Ort
USD 120.000 - 180.000
Image Processing Engineer, Video Stabilization & Motion Estimation
Image Processing Engineer, Video Stabilization & Motion Estimation

Efference • San Francisco (CA)

Vor Ort
USD 130.000 - 210.000
Computer Vision Engineer, VIO / SLAM
Computer Vision Engineer, VIO / SLAM

Efference • San Francisco (CA)

Vor Ort
USD 120.000 - 190.000
Image Processing Engineer, HDR & Tone Mapping
Image Processing Engineer, HDR & Tone Mapping

Efference • San Francisco (CA)

Vor Ort
USD 150.000 - 210.000
Image Processing Engineer, Testing & Automation
Image Processing Engineer, Testing & Automation

Efference • San Francisco (CA)

Vor Ort
USD 120.000 - 180.000
Camera Systems Software Engineer
Camera Systems Software Engineer

Skild AI • San Mateo (CA)

Vor Ort
USD 100.000 - 300.000
Solutions Engineer, Robotics
Solutions Engineer, Robotics

Efference • San Francisco (CA)

Vor Ort
USD 140.000 - 210.000