Electronics Technician Maintenance III (CBSP) SATCOM

Centurum; San Diego (CA); Presencial; USD 63.000 - 80.000; Jornada completa

Descripción de la vacante

Centurum in San Diego, CA, is seeking an Electronics Technician Maintenance (ETM) III to apply advanced technical knowledge to complex shipboard electronics problems. You will perform circuit analyses, waveform calculations, and signal flow tracing using high-end test gear and provide guidance to junior technicians.

The role requires 10+ years of overhaul/repair experience on CBSP, DMR, NMT, HF, RF, TACAN, ESM, or naval antenna systems, plus hands-on SATCOM and KG-175 TACLANE proficiency.

Formación

• Formal system-specific training on unit or force level variants AN/USC-69(v)3/A(v)3/B(v)3 and AN/USC-69(v)2/A(v)2 is required.
• Strong understanding of electrical safety, power handling, and HERP/RF protections.
• Ability to read and execute steps in System Operational Verification Test (SOVT) documents.
• Proficiency reading shipboard drawings and installation documents (IRD/SID/SHIPALT/LAR).
• Experience with shipboard hardware installation, cable management, and inspections.
• Hands‑on proficiency configuring Cisco routers and network switches; KG-175 TACLANE mgmt.
• Solid networking knowledge (TCP/IP, routing, ACLs, VPNs) and cybersecurity basics (STIGs, vulnerabilities).

Responsabilidades

• Apply advanced technical knowledge to solve complex electronics/mechanics problems on shipboard systems.
• Perform circuit analysis, waveform calculations, and signal-flow tracing with advanced test equipment.
• Provide technical guidance to lower level technicians when needed.
• Configure and verify SATCOM links, including KG-175 TACLANE and network devices.
• Deliver detailed project documentation and final status reports for cross‑functional handoffs.

Conocimientos

Cisco router configuration

Networking fundamentals

SATCOM knowledge

STIGs security

Documentation writing

SOVT testing

Cable management

BERT testing

Troubleshooting SATCOM

Educación

HS Diploma

Herramientas

Digital Multimeter

Spectrum Analyzer

BERT tester

LAN Cable Tester

PuTTY/Tera Term

Router GUI

Descripción del empleo

DUTIES AND RESPONSIBILITIES

The Electronics Technician Maintenance (ETM) III applies advanced technical knowledge to solve complex problems that typically cannot be solved solely by referencing manufacturers' manuals or similar documents. Examples of such problems include determining the location and density of circuitry, evaluating electromagnetic radiation, isolating malfunctions, and incorporating engineering; changes. Work typically requires an understanding of the interrelationships of circuits, exercising independent judgment in performing such tasks as making circuit analyses, calculating wave forms, and tracing relationships in signal flow, using complex test instruments such as high frequency pulse generators, frequency synthesizers, distortion analyzers, and complex computer control equipment. Work may be reviewed by supervisor for general compliance with accepted practices. This position may provide technical guidance to lower level technicians.

The ideal candidate will have ten (10) years of experience performing overhauls and repairs on any of the following shipboard electronics systems: Commercial Broadband Satellite Program (CBSP), Digital Modular Radio (DMR), Navy Multiband Terminal (NMT), High Frequency (HF), Radio Frequency (RF), High Frequency Radio Group (HFRG), Tactical Air Navigation System (TACAN), Electronic Support Measures (ESM), or Naval Shipboard Antenna Systems.

REQUIRED SKILLS/YEARS OF EXPERIENCE

The ETM III will demonstrate the following core technical capabilities and system-specific experience:

• Must have completed formal system-specific training on either of the following variants:
  Unit Level Variant (ULV) AN/USC-69(v)3/A(v)3/B(v)3/C(v)3
  Force Level Variant (FLV) AN/USC-69(v)2/A(v)2
• Must have complete understanding of electrical safety, raw AC/DC power handling, and Hazards of Electromagnetic Radiation to Personnel (HERP/RF radiated power) protection.
• Must have the ability to read, interpret, and execute steps in System Operational Verification Test (SOVT) documents, including all safety and security measures.
• Must have proficiency in reading and interpreting shipboard installation drawings, including Installation Requirements Drawings (IRD), Ship Installation Drawings (SID), Ship Alterations (SHIPALT), and Liaison Action Requests (LAR).
• Must have demonstrated experience with shipboard hardware installation, high-standard cable management, and conducting thorough physical inspections (checking for cable damage, correct labeling, and secure equipment mounting).
• Must have hands‑on proficiency in configuring and verifying settings on Cisco routers and network switches.
• Must have experience configuring and managing cryptographic equipment, specifically the KG-175 TACLANE.
• Must have a solid understanding of networking protocols, including TCP/IP, basic routing, Access Control Lists (ACLs), and Virtual Private Networks (VPNs).
• Must have familiarity with core cybersecurity principles, the purpose and application of Security Technical Implementation Guides (STIGs), and standard vulnerability scans.
• Must have understanding SATCOM architecture (ship/shore), SATCOM modem settings
• Must have the ability to deliver detailed technical documentation and final system status reports upon project completion to ensure smooth cross‑functional handoffs.
• The ETM III must be competent in operating the following specialized tools to troubleshoot SATCOM links and electronic components:
  a. Digital Multimeter: Perform basic AC (single‑phase and 3‑phase) and DC power verifications, alongside DC‑bias troubleshooting of sub‑level electronic components.
  b. Spectrum Analyzer: Setup and display the Signal Of Interest (SOI), interpret reference levels, bandwidth, Carrier‑to‑Noise (□(C/N)) ratios, distinguish between dBm and dB readings, and perform/analyze Insertion Loss (□(S_□21 )) and Voltage Standing Wave Ratio (VSWR) measurements.
  c. Bit Error Rate Tester (BERT): Clear understanding of the differences between Serial and Ethernet BERT, with the ability to configure and utilize Serial and/or Ethernet BERT to troubleshoot active SATCOM links.
  d. LAN Cable Tester: Capability to test Ethernet cables for proper pinout, continuity, and wiring verification.
  e. Software Tools: Proficient with terminal emulators (e.g., PuTTY, Tera Term) and GUI‑based management interfaces to configure and diagnose routers, modems, and Ethernet switches.

Education:

HS Diploma

Travel Required

25%

Work Location

San Diego, CA

This position is required to have and maintain a Secret US DoD security clearance.

PREFERRED SKILLS

• Desired System Experience - STtNG Experience: Direct, hands‑on experience or familiarity with the Satellite Terminal (Transportable) non-geostationary (STtNG) Increment 1 is highly desired.
• Fleet Support and Testing: Demonstrated experience performing shipboard testing, specifically including the execution of System Operational Verification Tests (SOVT).
• Navy Modernization: Proven experience supporting Navy modernization initiatives, installation cycles, and system upgrades for C4I systems.
• Networking and Virtualization: Hands‑on experience configuring and maintaining Virtual Cisco Routers.
• Industry Certifications: Possession of current CompTIA Security+, CompTIA Network+, and CCNA certifications.

REMARKS

Must be able to communicate effectively in English, both verbally and in writing.

Must be able to interface effectively with all levels of technical and management personnel.

Compensation: $46 - $58 an hour.

Compensation for positions at Centurum vary depending on a wide range of factors including, but not limited to, location, responsibilities, skill set, and level of experience.

EOE M/F/Disability/Veteran