Electronics Technician (1st Shift - M-F 6:15 AM – 3:00 PM)

GE HealthCare (United States)

Salt Lake City (UT)

On-site

USD 48,000 - 64,000

Full time

10 days ago

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

GE HealthCare is seeking an Electronics Technician to support product development and manufacturing at our Salt Lake City site. You will set up data acquisition equipment, run tests, and report results while adhering to quality and safety standards.

You'll work with Digital Multimeters, oscilloscopes, and power supplies, perform electrical calibration, and participate in continuous improvement initiatives to enhance process efficiency and product quality.

Qualifications

  • Associates degree or 2 years electronics experience as alternative.
  • Ability to troubleshoot at subsystem and system level.
  • Able to interpret test data and assist with design corrections.
  • Must be able to lift up to 35 lbs and stand or sit for long periods.

Responsibilities

  • Set up and run data acquisition equipment for tests.
  • Report and document results of tests and measurements.
  • Test production/refurbished assemblies for correct operation.
  • Perform electrical calibration on systems and subassemblies.
  • Interpret circuit board schematics and interconnect diagrams.
  • Engage in LEAN process improvement activities.

Skills

Electronics
Troubleshooting
Instrumentation
Problem solving

Education

Associates degree in Electronics or Engineering
Bachelor’s degree in Manufacturing, Engineering or Technology

Tools

Digital Multimeter
Oscilloscope
Power Supplies

Job description

Job Description Summary

This role performs diverse and complex assignments in support of GE HealthCare product development and manufacturing. Assignments may include but are not limited to:

  • Set up and running of data acquisition equipment for tests
  • Reporting/documenting results of tests and measures
Job Description Summary

This role performs diverse and complex assignments in support of GE HealthCare product development and manufacturing. Assignments may include but are not limited to:

  • Set up and running of data acquisition equipment for tests
  • Reporting/documenting results of tests and measures

GE HealthCare is a leading global medical technology and digital solutions innovator. Our mission is to improve lives in the moments that matter. Unlock your ambition, turn ideas into world-changing realities, and join an organization where every voice makes a difference, and every difference builds a healthier world.

At our Salt Lake City site, engineering, research, and manufacturing teams come together to design and build surgical imaging technologies — including advanced C-arm imaging systems that support image-guided procedures for clinicians across the globe. The work here contributes to the precision and capability clinicians bring into the OR every day.

Job Description
Essential Responsibilities
  • Test production/Refurb assemblies/systems for correct operation and compliance to performance specifications.
  • Ability to demonstrate proficiency using a Digital Multimeter, Oscilloscope, and Power Supplies.
  • Perform electrical calibration on production/refurb systems and subassemblies.
  • Interfaces with other departments in the execution of duties to ensure the orderly flow of material and information.
  • Execute training plans.
  • Perform basic trouble shooting encompassing multiple variables and unknowns to achieve root cause analysis and problem resolution. Conduct diagnostic tests, as required to draw conclusions.
  • Interpret circuit board schematics/system interconnect diagrams.
  • Utilize basic technical communications throughout the test process for production/Refurb assemblies/systems.
  • Provide evaluation/constructive feedback in the development of internal and external engineering, manufacturing, or service documentation.
  • Provide strong individual contributions to team goals.
  • Participate in LEAN process improvement activities to improve quality, process flow, and cycle or TAKT times.
  • Comply with EHS regulations and policies and bring concerns/suggestions to leadership.
  • Maintain daily production output.
  • Identify and report defects in assigned area.
  • Engage in daily 5s activities.
Required Qualifications
  • Associates degree in an Electronics or Engineering field, or a technical certificate from a qualifying school with at least 25 credit hours in electronics including classes in electronics assembly, DC/AC/analog electronics, digital fundamentals, troubleshooting, and instrumentation, or a High School diploma and 2 years Electronics experience.
  • Proficiency to logically troubleshoot at subsystem and system level, using identifiable problem-solving techniques
  • Ability to draw accurate conclusions from test data, malfunctions, or deviations, and assist with corrections to the existing design or process
  • Must be able to physically lift (floor to waist, waist to crown level, and horizontally)
  • Lift and carry up to 35 lbs. (Anything over 35 lbs. requires assistance.)
  • Must be able to perform frequent simple grasping, firm grasping, fine manipulation, neck rotation, and neck flexion frequently throughout the workday
  • Must be able to twist, push/pull, reach at, above and below shoulder height frequently throughout the workday
  • Must be able to frequently stoop, bend, squat and kneel throughout the workday
  • Must be able to stand/sit continuously throughout the day
  • Must be able to ascend/descend/balance occasionally on portable step stools
Desired Characteristics
  • Bachelor’s degree in manufacturing, Engineering or Technology related fields.
  • Experience in medical manufacturing or other highly regulated industry preferred.

We will not sponsor individuals for employment visas, now or in the future, for this job opening.

Additional Information
  • GE HealthCare offers a great work environment, professional development, challenging careers, and competitive compensation.

GE HealthCare is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

GE HealthCare will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable).

While GE HealthCare does not currently require U.S. employees to be vaccinated against COVID-19, some GE HealthCare customers have vaccination mandates that may apply to certain GE HealthCare employees.

Relocation Assistance Provided: No

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Electronics Technician (1st Shift - M-F 6:15 AM – 3:00 PM)
Electronics Technician (1st Shift - M-F 6:15 AM – 3:00 PM)

GE HealthCare (United States) • Salt Lake City (UT)

On-site
USD 45,000 - 70,000
Manufacturing Technician 1
Manufacturing Technician 1

GE HealthCare (United States) • Aurora (OH)

On-site
PHP 279,000 - 502,000
Paid Training
Medical Coverage
Dental Coverage
+3
Manufacturing Technician 1
Manufacturing Technician 1

GE HealthCare (United States) • Aurora (CO)

On-site
USD 42,000 - 62,000
Paid Training
Full Benefits starting first day: MED/
Manufacturing Technician 1
Manufacturing Technician 1

MS0062 USA Instruments, Inc • United States

On-site
USD 28,000 - 39,000
Paid Training
Full Benefits starting first day: Med,
Advanced Technician-GoldSeal
Advanced Technician-GoldSeal

GE HealthCare (United States) • Oak Creek (WI)

On-site
USD 65,000 - 90,000
Production Associate I
Production Associate I

GE HealthCare (United States) • Salt Lake City (UT)

On-site
USD 21,000 - 28,000
Production Associate I
Production Associate I

F39055 OEC Medical Systems, Inc. • Salt Lake City (UT)

On-site
USD 22,000 - 32,000
Manufacturing Technician 1 (2nd Shift)
Manufacturing Technician 1 (2nd Shift)

GE HealthCare (United States) • City of Troy (NY)

On-site
USD 38,000 - 57,000
Medical insurance
Dental insurance
Vision insurance
+4
Production Associate 1 - 1st Shift (M-F - 6:00 AM – 2:30 PM)
Production Associate 1 - 1st Shift (M-F - 6:00 AM – 2:30 PM)

GE HealthCare (United States) • State College

On-site
USD 25,000 - 30,000
Manufacturing Technician 1 (2nd Shift)
Manufacturing Technician 1 (2nd Shift)

HC1316 GE Precision Healthcare LLC • City of Troy (NY)

On-site
USD 38,000 - 57,000