Electronics/RF Technician II

EPIQ DESIGN SOLUTIONS, LLC.

Country Side (MD)

On-site

USD 50,000 - 70,000

Full time

2 days ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Benefits offered by this job

Vacation policy
Sabbatical program
401(k) match
Health insurance
Dental & vision insurance
Life insurance
Disability insurance
Employee assistance program
Wellness reimbursement
Charitable matching
Company culture

Job summary

Epiq Solutions is seeking an experienced Electronics/RF Technician II to support development, testing, and repair of SDR solutions. The role includes RF testing, tuning, system-level verification, and initial troubleshooting per established procedures and quality standards.

The technician will operate ATE racks, evaluate data, perform FNR adjustments, and assist with RMA evaluations, repairs, and reporting while maintaining meticulous documentation and compliance with internal processes.

Qualifications

  • Technical certificate or associate degree in electronics, RF/microwave tech, or related field.
  • At least three years in electronics manufacturing.
  • Working knowledge of RF concepts: gain, loss, harmonics, impedance, S-parameters.
  • Proficiency with RF test equipment, fixtures, ATE software, and controlled measurement practices.
  • Ability to distinguish failures from ATE or peripheral issues.

Responsibilities

  • Independently perform unit- and system-level test procedures ensuring complete data and specs.
  • Operate ATE racks, perform maintenance, verify cables, fixtures, references, and calibration.
  • Troubleshoot test failures to identify unit vs ATE issues.
  • Interpret final-test results for RF performance metrics (IP3/IIP3, NF, bandwidth, isolation).
  • Perform FNR adjustments with guidance and document results.
  • Tune and align RF/microwave assemblies up to 6 GHz, with guidance to 24 GHz.
  • Read schematics, layouts, BOMs, datasheets, and test docs.
  • Solder, rework, and repair RF assemblies and components.
  • Support RMA evaluation and repair with clear technical reporting.
  • Coach junior technicians on test practices and safety.

Skills

RF testing
Schematic interpretation
Troubleshooting
Documentation
Microsoft Office
Communication

Education

Associate degree or technical certificate in electronics/RF

Tools

Vector Network Analyzer (VNA)
Oscilloscopes
ATE software

Job description

Description

COMPANY BACKGROUND

Epiq Solutions develops cutting-edge software-defined radio (SDR) products and processing solutions to enable spectrum dominance for maritime, land, air, and space domains. With 17 years serving government and commercial enterprise customers and 25K+ devices fielded to date, Epiq Solutions is a trusted partner with a proven heritage of delivering open architecture products in radically small form factors where time-to-market, cost, and performance are critical for mission success.

For more information, visit https://epiqsolutions.com.

JOB SUMMARY

We are seeking an experienced Electronics/RF Technician II to support the development, testing, and repair of custom and commercial SDR solutions. This position performs RF testing, tuning, system-level verification, and initial troubleshooting in accordance with established test procedures and applicable quality standards.

The technician operates and supports automated test equipment (ATE) racks, evaluates final-test data, performs guided FNR adjustments, and assists with return material authorization (RMA) evaluations, repairs, and reporting.

JOB RESPONSIBILITIES
  • Independently perform unit-level and system-level test procedures, ensuring test data are complete and results meet specifications.
  • Operate assigned ATE racks and perform routine operator maintenance, cable and fixture verification, reference checks, and calibration support in accordance with controlled procedures.
  • Troubleshoot common test failures to determine whether the cause is related to the unit under test or the ATE setup, including cables, fixtures, software, configuration, bias, and calibration.
  • Interpret final-test results for gain, third-order intercept point (IP3/IIP3), internally generated spurs, noise figure, bandwidth, isolation, rejection, phase noise, and other product-specific parameters.
  • Perform approved FNR adjustments with guidance, verify their effects on related performance parameters, and document adjustments and retest results.
  • Independently tune and align RF/microwave assemblies operating at frequencies up to 6 GHz and support tuning and alignment up to approximately 24 GHz with guidance.
  • Read and apply schematics, layouts, bills of material, datasheets, manufacturing travelers, and test documentation.
  • Perform approved soldering, rework, and repair on RF assemblies, connectors, cables, and components.
  • Support RMA evaluation and repair by reproducing failures, performing unit-level and system-level testing, documenting findings, completing approved repairs, and contributing clear technical content to RMA reports.
  • Coach Technician I employees on proper test practices, safe ATE rack operation, documentation, and workmanship.
  • Perform other duties as assigned.
Requirements
REQUIRED SKILLS
  • Technical certificate or associate degree in electronics, electrical engineering technology, RF/microwave technology, or a related field; or an equivalent combination of education and relevant experience.
  • At least three years of experience in an electronics manufacturing environment.
  • Working knowledge of gain, loss, harmonics, noise, impedance, and basic S-parameter concepts.
  • Proficiency with common RF test equipment, production fixtures, ATE software, and controlled measurement practices.
  • Ability to distinguish likely product failures from issues involving ATE racks, cables, fixtures, software, configuration, or calibration.
  • Ability to clearly explain pass/fail test results and troubleshooting steps.
  • Proficiency with Microsoft Office applications.
  • Strong attention to detail, effective communication skills, and the ability to work collaboratively and adapt to changing priorities.
  • Eligibility to work on federal contracts that require U.S. citizenship.
PREFERRED SKILLS
  • IPC-A-610 and/or J-STD-001 training or certification appropriate to the work performed.
  • Experience in high-reliability or controlled electronics manufacturing, preferably aerospace, defense, or communications.
  • Familiarity with ESD control, calibration systems, 5S/6S, lean manufacturing, and structured problem-solving.
BENEFITS
  • Join a successful and growing company investing in our future success
  • Generous vacation policy
  • Paid five-week sabbatical every five years
  • 401(k) company match
  • Health, dental, vision insurance
  • Life and long-term disability insurance
  • Employee assistance program
  • Wellness reimbursement
  • Charitable giving company match
  • Competitive salary commensurate with experience and performance
  • Fun, laid-back culture and rewarding work!

Epiq is an Equal Employment Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Electronics/RF Technician III
Electronics/RF Technician III

EPIQ DESIGN SOLUTIONS, LLC. • Country Side (MD)

On-site
USD 70,000 - 100,000
Generous vacation policy
Sabbatical every five years
401(k) match
+9
Senior Staff RF Engineer
Senior Staff RF Engineer

Epiq Solutions • Frederick (MD)

On-site
USD 140,000 - 190,000
Generous vacation policy
Paid five-week sabbatical every five =
401(k) company match
+7
Senior Staff RF Engineer
Senior Staff RF Engineer

EPIQ DESIGN SOLUTIONS, LLC. • Country Side (MD)

On-site
USD 130,000 - 180,000
Generous vacation policy
Paid five-week sabbatical every five ?
401(k) company match
+7
Senior Staff RF Engineer – Frederick, MD
Senior Staff RF Engineer – Frederick, MD

Epiq Solutions • Frederick (MD)

On-site
USD 140,000 - 180,000
Generous vacation policy
Paid five-week sabbatical every five y
401(k) company match 100% of first 6%
+7
Production Supervisor
Production Supervisor

Epiq Solutions • Frederick (MD)

On-site
USD 85,000 - 115,000
Flexible work hours
Generous vacation policy
Sabbatical after five years
+6
Production Supervisor
Production Supervisor

EPIQ DESIGN SOLUTIONS, LLC. • Frederick (MD)

On-site
USD 85,000 - 110,000
Flexible work hours
Generous vacation policy
401(k) matching
+2
Manager Hardware Engineering
Manager Hardware Engineering

EPIQ DESIGN SOLUTIONS, LLC. • Country Side (MD)

On-site
USD 150,000 - 200,000
Generous vacation
Sabbatical every 5 years
401(k) match
+7
Manager Hardware Engineering – Frederick, MD
Manager Hardware Engineering – Frederick, MD

Epiq Solutions • Frederick (MD)

On-site
USD 140,000 - 180,000
Generous vacation policy
Sabbatical after five years
401(k) company match
+6
RF/Microwave Electronics Tech II for SDR Solutions
RF/Microwave Electronics Tech II for SDR Solutions

EPIQ DESIGN SOLUTIONS, LLC. • Country Side (MD)

On-site
USD 50,000 - 70,000
Vacation policy
Sabbatical program
401(k) match
+8
Principal Systems Engineer
Principal Systems Engineer

EPIQ DESIGN SOLUTIONS, LLC. • Country Side (MD)

On-site
USD 150,000 - 210,000
Generous vacation policy
Five-week sabbatical every five years
401(k) company match
+3