Electronics Quality Technician III

motorolasolutions

Los Angeles (CA)

Vor Ort

USD 92.839.000 - 99.029.000

Vollzeit

Vor 8 Tagen
Bewerbungsgenerator

Mach aus dieser Rolle ein Bewerbungsgespräch — ein Lebenslauf und ein Anschreiben, die darauf ausgerichtet sind, was dieser Arbeitgeber sucht.

Schaffe es an den ATS-Filtern vorbei

Benefits dieser Stelle

Incentive bonus plans
Medical, dental, vision benefits
401(k) with company match
10 paid holidays
Generous paid time off
Employee stock purchase plan
Paid parental & family leave

Zusammenfassung

Silvus Technologies, a subsidiary of Motorola Solutions, is seeking an Electronics Quality Technician-III to support StreamCaster MANET product development and manufacturing. This onsite role in West Los Angeles reports to the Quality Supervisor and requires meticulous inspection, testing, and documentation to ensure high-quality assemblies.

Candidate will perform advanced visual inspection, calibration, and RMA support, with emphasis on IPC standards and robust problem solving in a fast-paced

Qualifikationen

  • High School Diploma or GED with 5+ years in electronics assembly, inspection, or rework; OR an Associate’s degree with 3 years; OR a Bachelor’s degree with 1 year.
  • Proficiency in soldering equipment such as hand irons, bottom burners, and hot air stations.
  • Familiarity with basic test equipment (oscilloscope, DMM, power supply).
  • Proficient in Windows-based data entry and documentation tools.
  • Must be a U.S. Person due to clients under U.S. federal contracts.
  • All employment is contingent upon successful background check and drug test.

Aufgaben

  • Conduct advanced visual inspection and rework per IPC-J-STD 001 standards.
  • Perform continuity, resistance, and voltage checks to support root cause analysis.
  • Build and repair custom cable assemblies, wiring harnesses, and test fixtures.
  • Maintain and calibrate inspection tools and test equipment under supervision.
  • Support RMA processing by performing initial diagnostic checks on returned units.
  • Collaborate with Quality Engineers to identify process improvements and recurring issues.
  • Document inspection results and communicate non-conformances effectively.
  • Perform other related duties of which the above are representative.

Kenntnisse

Soldering proficiency
Electrical testing
Windows data entry

Ausbildung

High School Diploma or GED
Associate’s degree in Electronics
Bachelor’s degree in Electronics

Tools

Oscilloscope
DMM
Power supply
Soldering equipment

Jobbeschreibung

Company Overview

At Motorola Solutions, we believe that everything starts with our people. We’re a global close-knit community, united by the relentless pursuit to help keep people safer everywhere. We build and connect technologies to help protect people, property and places. Our solutions foster the collaboration that’s critical for safer communities, safer schools, safer hospitals, safer businesses, and ultimately, safer nations. Connect with a career that matters, and help us build a safer future.

Department Overview

Silvus Technologies was acquired by Motorola Solutions in 2025, and is now part of its ecosystem of safety and security technologies.

With deep roots in DARPA research, Silvus Technologies develops world-class advanced communications technologies that are reshaping the tactical communications landscape. From pure line-of-sight to extreme non-line-of-sight, Silvus radios form a self-healing, self-forming mesh network, enabling secure and reliable connectivity, including video and high-bandwidth data.

Job Description

Silvus Technologies a leading provider of advanced MANET and MIMO communications systems, is reshaping mesh network technology for mission-critical applications – on the ground, in the air and at sea. Its battle-proven StreamCaster family of MANET radios and proprietary MN-MIMO waveform provides the vital communications link for defense, law enforcement and public safety agencies around the world, and in the toughest operational environments.

With deep roots in DARPA research, Silvus Technologies develops world-class advanced communications technologies that are reshaping the tactical communications landscape. From pure line-of-sight to extreme non-line-of-sight, Silvus radios form a self-healing, self-forming mesh network, enabling secure and reliable connectivity, including video and high-bandwidth data.

Silvus Technologies is a wholly owned subsidiary of Motorola Solutions, Inc.

Would you like to join an incredibly talented group of people, doing very challenging work, with the prime directive of “Keeping Our Heroes Connected”?

THE OPPORTUNITY

The Electronics Quality Technician-III reports to the Quality Supervisor on the Operations - Quality Control team. The successful individual in this role will support StreamCaster™ MANET product development and manufacturing.

This position is fully onsite, Monday through Friday, at Silvus Technologies’ HQ in the heart of vibrant West Los Angeles.

The following is a list of at least some of the current essential job functions of the position. Management may assign or reassign duties and responsibilities at any time at its discretion.

ROLE AND RESPONSIBILITIES
  • Conduct advanced visual inspection and rework per IPC-J-STD 001 standards.

  • Perform continuity, resistance, and voltage checks to support root cause analysis.

  • Build and repair custom cable assemblies, wiring harnesses, and test fixtures.

  • Maintain and calibrate inspection tools and test equipment under supervision.

  • Support RMA processing by performing initial diagnostic checks on returned units.

  • Collaborate with Quality Engineers to identify process improvements and recurring issues.

  • Document inspection results and communicate non-conformances effectively.

  • Perform other related duties of which the above are representative.

REQUIRED QUALIFICATIONS
  • High School Diploma or GED with a minimum of 5 years of experience in electronics assembly, inspection, or rework; OR an Associate’s degree in Electronics with 3 years of relevant experience; OR a Bachelor’s degree in Electronics or a related field with 1 year of relevant experience.

  • Proficiency in the use of soldering equipment such as hand irons, bottom burners, and hot air stations

  • Familiarity with basic test equipment (oscilloscope, DMM, power supply).

  • Proficient in Windows-based data entry and documentation tools.

  • Must be a U.S. Person (U.S. Citizen, or U.S. Permanent Resident) due to clients under U.S. federal contracts.
  • All employment is contingent upon the successful clearance of a background check and drug test.
PREFERRED KNOWLEDGE, SKILLS, AND ABILITIES
  • Certified IPC Specialist (CIS) under IPC-A-610 or IPC J-STD 001.

  • Familiar with low-voltage and RF PCB assemblies.

  • Experience supporting R&D or prototype environments.

  • Knowledge of ESD controls, calibration tracking, and safety procedures.

WORKING CONDITIONS AND PHYSICAL REQUIREMENTS
  • Occasional exposure to heat and cold.

  • The employee is required to do the following while performing the duties of this job:

    • Perform bending and reaching movements to place items on lower and higher shelves.
    • Kneeling or squatting to access lower shelves.
    • Must be able to lift up to 50 lbs. when receiving incoming part shipments.
    • Walking/Moving in the labs.

COMPENSATION: $32.40 - $34.56 / hourly

The pay range is NOT a guarantee. It is based on market research and peer data and will vary depending on the candidate’s experience and qualifications.

NOTE - As a US Federal Contractor, Silvus Technologies requires that ALL candidates being considered for employment for any position (regardless of level) MUST be a U.S. Person (permanent resident or citizen). Stricter U.S. Citizen ONLY requirements (needed for some Engineering or R&D roles) will be included in the Required Qualifications section of the posted position. This does NOT apply to international positions; only job postings for positions located in the US.

#silvuscareers

Basic Requirements
  • High School Diploma or GED with a minimum of 5 years of experience in electronics assembly, inspection, or rework; OR an Associate’s degree in Electronics with 3 years of relevant experience; OR a Bachelor’s degree in Electronics or a related field with 1 year of relevant experience.

  • NOTE - Must be a U.S. Person (U.S. Citizen, or U.S. Permanent Resident) due to clients under U.S. federal contracts.
  • All employment is contingent upon the successful clearance of a background check and drug test.
Travel Requirements

None

Relocation Provided

None

Position Type

Experienced

Referral Payment Plan

Yes

Our U.S.Benefitsinclude:

  • Incentive Bonus Plans
  • Medical, Dental, Visionbenefits
  • 401K with Company Match
  • 10 Paid Holidays
  • GenerousPaidTime Off Packages
  • Employee Stock Purchase Plan
  • PaidParental & Family Leave
  • and more!

EEO Statement

Motorola Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion or belief, sex, sexual orientation, gender identity, national origin, disability, veteran status or any other legally-protected characteristic.

We are proud of our people-first and community-focused culture, empowering every Motorolan to be their most authentic self and to do their best work to deliver on the promise of a safer world. If you’d like to join our team but feel that you don’t quite meet all of the preferred skills, we’d still love to hear why you think you’d be a great addition to our team.

We’re committed to providing an inclusive and accessible recruiting experience for candidates with disabilities, or other physical or mental health conditions. To request an accommodation, please complete this Reasonable Accommodations Form so we can assist you.

Hol dir deinen kostenlosen, vertraulichen Lebenslauf-Check.

oder ziehe deine Datei hierhin.

Similar jobs

Ähnliche Jobs, die dir auch gefallen könnten

Electronics Quality Technician I
Electronics Quality Technician I

motorolasolutions • Los Angeles (CA)

Vor Ort
USD 36.000 - 39.000
Incentive bonus plans
Medical, Dental, Vision benefits
401K with company match
+2
Electronics Quality Technician II
Electronics Quality Technician II

Motorola Solutions • Los Angeles (CA)

Vor Ort
USD 40.000 - 43.000
Incentive bonus
Medical, dental, vision
401K with match
+2
Electronics Quality Technician I
Electronics Quality Technician I

Silvus Technologies • Los Angeles (CA)

Vor Ort
USD 35.817 - 38.572
Incentive bonus plans
Medical, dental, vision benefits
401(k) with company match
+4
Electronics Quality Technician III
Electronics Quality Technician III

Motorola Solutions • Los Angeles (CA)

Vor Ort
USD 44.000 - 48.000
Senior Electronics Test Engineer
Senior Electronics Test Engineer

Motorola Solutions • Los Angeles (CA)

Vor Ort
USD 105.000 - 140.000
Incentive bonus
Medical, Dental, Vision benefits
401K with Company Match
+3
Electronics Quality Technician I
Electronics Quality Technician I

Motorola Solutions • Los Angeles (CA)

Vor Ort
USD 36.000 - 39.000
Incentive Bonus Plans
Medical, Dental, Vision benefits
401K with Company Match
+2
Electronics Test and Assembly Technician-I (Morning Shift)
Electronics Test and Assembly Technician-I (Morning Shift)

Motorola Solutions • Los Angeles (CA)

Vor Ort
USD 29.797 - 31.216
401K with Company Match
Incentive Bonus Plans
Generous Paid Time Off Packages
+2
Electronics Test and Assembly Technician-I (Morning Shift)
Electronics Test and Assembly Technician-I (Morning Shift)

motorolasolutions • Los Angeles (CA)

Vor Ort
USD 29.000 - 30.000
Medical, Dental, Vision benefits
401K with Company Match
10 Paid Holidays
+2
Senior Electronics Test Engineer
Senior Electronics Test Engineer

Silvus Technologies • Los Angeles (CA)

Vor Ort
USD 105.000 - 140.000
Incentive Bonus Plans
Medical, Dental, Vision benefits
401K with Company Match
+4
Electronics Quality Technician
Electronics Quality Technician

Silvus Technologies • Los Angeles (CA)

Vor Ort
USD 110.318.000 - 116.732.000