Electronic Equipment Tech
Kansas City National Security Campus
A complete application in a minute
Tailored resume and cover letter, ready to send.
Benefits offered by this job
Job summary
Honeywell Federal Manufacturing & Technologies, LLC at KCNSC in Kansas City, MO is seeking an Electronic Equipment Technician to lay out, fabricate, assemble and prove-in precision test equipment and systems. You will assemble PCBs, ins... (rest truncated)
This position requires a US citizenship and the ability to obtain a DOE Q-level security clearance, along with a two-year electronics degree or equivalent training. Ability to work on-site and across shifts is essential.
Qualifications
- US citizenship and ability to obtain DOE Q-level security clearance.
- Two year Electronics Technical Degree or equivalent.
- Ability to work any shift.
Responsibilities
- Lay out, fabricate, modify, assemble and prove-in electronic, electromechanical, pressure, vacuum, computerized, environmental and scientific test equipment and systems.
- Assemble printed circuit boards and vector boards for test equipment.
- Install, calibrate, service and troubleshoot test equipment and systems per specifications.
- Perform complete checkout and evaluation of equipment; ensure conformance to design intent and standards.
- Possibly write and use programs to aid in prove-in, evaluation, calibration and repair of test equipment.
Skills
Education
Tools
Job description
The Kansas City National Security Campus (KCNSC), managed and operated by Honeywell Federal Manufacturing & Technologies, is a premier advanced manufacturing facility that supports the safety, security, reliability and effectiveness of our nation's nuclear deterrent. With nearly 7,000 employees combined in Kansas City, Missouri, and Albuquerque, New Mexico, KCNSC protects our nation and allies by producing trusted national security products and services for the U.S. Department of Energy's National Nuclear Security Administration.
We create innovative solutions to complex national security challenges, and lead with accountability, collaboration and an unwavering dedication to our mission and core values.
Are you ready to do work that matters?
Lays out, fabricates, modifies, assembles and proves-in electronic, electromechanical, pressure, vacuum, computerized, environmental, and scientific test equipment and systems.
- Lays out, fabricates, modifies, assembles and proves-in electronic, electromechanical, pressure, vacuum, computerized, environmental, and scientific test equipment and systems.
- Assembles printed circuit boards and vector boards used in the manufacture of test equipment.
- Installs, maintains, inspects for conformance to specifications, services, troubleshoots and calibrates electronic, electromechanical, pressure, vacuum, environmental, computerized and scientific test equipment and systems, including electrical service boxes (inside test equipment), laboratory instruments, meters, lasers, computers and data acquisition systems.
- Test equipment is defined as equipment or gaging which electrically or electromechanically accepts the product or is used in the manufacture of the product.
- May perform related tasks as necessary in the completion of the employee's primary work assignment in the Electronic Equipment Technician classification.
- Performs complete check-out of testers and effects calibration.
- Performs complete evaluation of new or modified equipment and determines its acceptability. Determines that test equipment meets design intent and functions properly.
- Performs rework and replacement of components. Performs evaluation on test equipment as directed by the engineer and all evaluation on consecutive out-of-tolerance calibration readings.
- May write and use programs to assist in the prove-in, evaluation, calibration, maintenance and repair of test equipment.
- Makes any necessary setups and must be familiar with and apply electrical and electronic circuitry techniques, principles, formulae and troubleshooting techniques.
- Work is characterized by extremely critical calibration requirements and lack of definite procedural information which necessitates development of special servicing techniques.
- Works from schematics, wiring diagrams, wire running lists, sketches, engineering change notices, drawings, sheet metal layouts, machine drawings and other written or verbal instructions.
- Results require interpretation and analysis.
- Normally responsible for verifying own work for conformance to standards and specifications furnished for the operation and will be required to perform rework.
- Responsible for maintaining and repairing standards used in the calibration of test equipment, meters, special resistors, engineering and quality laboratory instruments.
- Responsible for all drawings and prints as a part of the print package in assigned work area.
- Performs necessary paperwork and must be familiar with procedure and specification requirements related to the work normally performed.
- Uses and may maintain equipment necessary to the performance of the task.
- May perform in-process inspection. May check and top off lubricants as necessary.
- Responsible for complying with applicable provisions of Article 18. Environment, Safety, Health of the Collective Bargaining Agreement.
- May transport tools, materials, and equipment to and from job site and may perform related tasks as necessary.
- US Citizenship, able to obtain and maintain US DOE "Q" level security clearance
- High School Diploma or GED
- Ability to work any shift
- Two (2) year Electronics Technical Degree, or equivalent technical degree or equivalent military training, or equivalent experience.
- Ability to troubleshoot to component level; familiar with three (3) phase AC.
- Experience in calibration field, troubleshooting and maintenance.
- Experience using spreadsheets and other tools to analyze and interpret data.
- Experience operating complex test equipment, using calibration software, following calibration procedures and manuals.
- Experience in Quality Inspection (Visual Inspection and/or Electrical testing) or calibration fields.
- Experience with utilizing microscopes and calibrated hand tools (calipers, micrometers, torque wrenches, digital multimeters, etc.)
- Computer programming and technical mathematics may be required, in addition to theory and application of digital electronics, microprocessors, R. F. and environmental control.
- Experience with reading drawings, electrical diagrams, and schematics.
- Vacuum, Pressure or temperature chamber experience.
- Good organizational skills with strong statistical math capabilities and ability to schedule multiple workload events and work independently with minimal supervision.
- Coordinated Measuring Machine (CMM) Experience.
- Experience using Microsoft Office applications, including MS Excel, Outlook, Word, and PowerPoint.
This job description is not all-inclusive; additional duties may be assigned. Employees must maintain regular, reliable attendance, and be able to work on-site and travel as needed.
- Medical, dental and vision insurance
- Health Savings Account (HSA)
- Industry leading 401(k) match
- Generous paid time off
- Flexible work schedule
- Tuition Reimbursement
- Professional Certification & License Programs
- Mission driven culture
We are required by the Department of Energy (DOE) to conduct a pre-employment drug test and background review, including checks of references, credit, law enforcement records and employment/education history. Applicants must be able to obtain and maintain a DOE Q-level security clearance, which requires U.S. citizenship. Dual citizenship may affect clearance eligibility.
All employment offers are contingent on a federal background investigation. Substance abuse, illegal drug use, falsified information, criminal activity, serious misconduct or other indicators of untrustworthiness may result in denial or loss of clearance and termination of employment.
Honeywell Aerospace is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status and any other protected class under state or federal law.
If you have a medical portable electronic device (MedPED) — such as a pacemaker, defibrillator, drug‑releasing pump, hearing aids or diagnostic equipment used to measure or monitor body functions — you may be required to meet NNSA security requirements if employed by us.
If you have a MedPED and are selected for an on-site interview, additional steps may be required to ensure compliance with NNSA security requirements before your interview date. If you require a reasonable accommodation to submit an application, please send an email to our Reasonable Accommodation Support Team at staffing@kcnsc.doe.gov.
- Job ID: 5477
- Category: Integrated Supply Chain
- Level of Experience:
- Posting Location: Kansas City National Security Campus 14520 Botts Road Kansas City, MO, 64147
- Remote Eligibility: On-Site
- Travel Required: 0-10%
- Approved Work States: MO
- Hourly/Salary: Hourly
- Division: 800
- Department: 809
'/%3e%3cpath%20d='M101.744%2012.4726L102.894%2016.1947L99.0021%2013.2201L101.744%2012.4726ZM105.3%208.40937H100.488L99.0026%203.59473L97.5116%208.41047L92.7%208.40385L96.5965%2011.3834L95.1055%2016.1942L99.0021%2013.2196L101.408%2011.3834L105.3%208.40992V8.40937Z'%20fill='white'/%3e%3cdefs%3e%3clinearGradient%20id='paint0_linear_5593_1381'%20x1='90'%20y1='9.44471'%20x2='99'%20y2='9.44471'%20gradientUnits='userSpaceOnUse'%3e%3cstop%20stop-color='%2300AD70'/%3e%3cstop%20offset='0.998594'%20stop-color='%2300B67A'/%3e%3cstop%20offset='1'%20stop-color='%23DCDCE6'/%3e%3c/linearGradient%3e%3c/defs%3e%3c/svg%3e){kind=small}
