Electrician Maintenance (12-mos fixed-term)

Stanford University School of Medicine; Palo Alto (CA); On-site; USD 90,000 - 130,000; Full time

Job summary

Stanford University Energy Operations is seeking a journey-level Electrician Maintenance to install, maintain, and repair electrical systems and equipment across campus. The role involves working independently or in a crew, following official instructions and safety standards, including ESOP, and potentially supporting higher-energy systems.

The position requires completion of an approved electrician apprenticeship or equivalent experience, willingness to work in restricted spaces, and

Qualifications

• Journey level knowledge equivalent to four years completion in an approved electrician apprenticeship program or four years of experience.
• Willingness to work in restricted spaces and high places.
• Must be a qualified journey electrician with experience in installation, maintenance, and operations of electrical equipment.
• Must be available for overtime and callbacks.

Responsibilities

• Perform electrical preventative maintenance on distribution panels, loads, and related equipment.
• Maintain and repair light and power circuits, controls, transformers, and motors.
• Test for short circuits and grounds; take corrective actions.
• Install new circuits, conduits, wires, and related equipment for additions or new construction.
• Repair/replace defective parts in motors, generators, pumps, and batteries.
• Calibrate and align instrumentation and meters for performance.
• Splice conductors; test dielectric strength and continuity; perform safe splices.
• Adhere to safety rules and ESOP standards.

Skills

Journeyman electrician

Electrical troubleshooting

Electrical installation

Safety compliance

Equipment repair

Computer literacy

Education

Apprenticeship completion

Tools

Voltmeter

Ohmmeter

Motor analyzer

Megger

Cable-pulling equipment

Hydraulic bending equipment

Job description

Job Description

Job Description
Land, Buildings & Real Estate (LBRE) is the operational core of Stanford University’s physical campus. LBRE constructs and maintains the Stanford campus, where advancements across the academic spectrum are made possible. Our work is founded upon the collective value of dedication, innovation, expertise, teamwork, and continuous improvement. We are committed to serving the university’s academic mission, as well as preserving and enhancing Stanford’s 8,180 acres, and pride ourselves on supporting the teaching and research of the university as “Caretakers of a LEGACY". About Energy Operations
Energy Operations (EO) is responsible for the safe, reliable, efficient, and sustainable operation and maintenance of Stanford University’s critical energy and utility infrastructure. The department supports the campus community by operating and maintaining central energy facilities, thermal systems, electrical distribution systems, utility networks, controls, metering, and related equipment serving the main campus, Stanford Redwood City, and other university facilities.
Energy Operations provides essential 24/7 services that support teaching, research, healthcare, residential life, and campus operations. Our work includes the generation and distribution of chilled water, low-temperature hot water, steam, and electrical power; maintenance of utility infrastructure and street lighting; and operation of sophisticated control, monitoring, and optimization systems.
Our team includes skilled operations professionals, maintenance mechanics, electricians, instrumentation and controls technicians, supervisors, apprentices, engineers, and administrative staff. Together, we are committed to operational excellence, environmental stewardship, continuous improvement, and a strong culture of safety. Energy Operations offers the opportunity to contribute directly to reliable campus services while supporting Stanford’s mission of education, research, and innovation.
Summary Of This Position
The duties listed under the Characteristic Duties section are designed to provide a representative sampling of key tasks and responsibilities associated with the job. They are not intended to be a complete list of all duties performed by employees in the classification.
Working under general supervision, the Electrician Maintenance performs journey-level work involved with the installation, maintenance, and repair of electrical systems and equipment, and if permitted, new construction and remodels. The employee may work alone or as part of a crew depending on the work assignment. Assignments are normally received in the form of work orders, blueprints, sketches, or verbal instructions. Routine work is performed independently and inspected in progress and upon completion for compliance with specifications. Direction is received from a Journeyman High Volt Electrician, Lead Person, or Supervisor.
An Electrician Maintenance person does not perform tasks that require a qualified High Voltage Electrician unless specifically trained and under the direct supervision of a High Voltage Electrician Specialist, Lead Person, or Supervisor.
An Electrician Maintenance person will always perform tasks in accordance with Stanford and departmental administrative and safety standards, especially the Stanford Electric Safety and Operations Program (ESOP).
An Electrician Maintenance person uses tools, materials, equipment, and personal protective equipment (PPE) provided by Stanford appropriately and as directed in the performance of work at all times.
Primary Job Responsibilities
The Electrician Maintenance performs journey-level work in the following areas and equipment:

• Maintains light and power circuits, elevators, controls, electric motors of various sizes and types, lighting fixtures, transformers, communications systems, standby battery power circuits and equipment, making repairs as necessary.
• Tests as necessary for short circuits, grounds, and other electrical disorders and takes corrective measures as indicated.
• Installs new circuits and equipment.
• Installs conduits, wires, cables, pull boxes, transformers, switches, and other related equipment required in making additions, extensions, or alterations in electrical systems, or in new construction, if permitted.
• Repairs and replaces defective parts in motors, generators, pumps, storage batteries, switchboards, controllers, switches, and other related equipment.
• Repairs hand tools.
• Troubleshoots single-phase and three-phase motors and related equipment.
• Uses a variety of tools and instruments such as hand tools of the trade, voltmeter, ohmmeter, current meter, motor analyzer, megger, hydraulic bending equipment, and motorized cable-pulling equipment.
• May perform above functions on systems connected with higher- energy particle accelerators or other equipment.
• May use a computer to meet operational needs.
• Ensures that safety rules are followed.

Required Qualifications (in addition to those listed under Knowledge, Skills, and Abilities):

• Ability to make repairs on all equipment encountered, diagnose electrical trouble, and make new installations with a minimum of supervision and technical advice.
• Willingness to work in restricted spaces and high places.
• Must be a qualified journey electrician and have work experience in electrical construction, if permitted, and the installation, maintenance, and operations of a wide variety of electrical equipment.
• Must be available to work overtime and available for callbacks.

Our Mission Energy Operations Team supports the University by managing installation, operation, and maintenance of the electrical distribution infrastructure while providing the highest quality services to students and other members of the university community in a sustainable and fiscally responsible manner.
Responsibilities Core Duties:

• Perform electrical preventative maintenance on all electrical equipment from distribution panels to receptacles and loads. Troubleshoot and repair faulty electrical distribution equipment.
• Maintain light and power circuits, control circuits, electric motors of various sizes and types, lighting fixtures, transformers, communications systems, standby battery power circuits and equipment, making repairs as necessary.
• Test as necessary for short circuits, grounds, and other electrical disorders and take corrective measures as indicated.
• Perform configuration management, trace and label electrical systems, red line prints, and document findings for engineering and draftspersons.
• Plan layouts and install conduits, circuits, wires, cables, pull boxes, transformers, switches, lighting fixtures and other related equipment required in making additions, extensions, or alterations in electrical systems, or in new construction.
• Repair and replace defective parts in motors, generators, pumps, storage batteries, switchboards, controllers, switches, and other related equipment.
• Calibrate and align Instrumentation and meters for optimal performance.
• Splice multiple conductor cables used in 600V and below electrical power distribution systems; troubleshoot and repair faulty or failed splices; test conductors for dielectric strength and continuity; cleans, and splice corresponding conductors, and connections.
• Adhere to safety rules.

Minimum Education And Experience Journey level knowledge equivalent to four years completion in an approved electrician apprenticeship program or a combination of equivalent education and work experience. This skill level is generally associated with 4 years of experience in the trade.
Knowledge, Skills And Abilities

• Ability to use computers and other electronic devices and learn departmental programs for planning, scheduling and documenting work.
• Compliance with, federal, state and local electrical and work safety standards.
• Ability to create and read wiring diagrams, single-line and three-line diagrams.
• Working knowledge of the theory of operations of various types of communications systems, motors, illumination systems, power systems, heating appliances and other electrical equipment.
• Must have knowledge of NFPA and CAL-OSHA standards on electrical and work safety procedures.
• Experience in electrical construction and the installation, maintenance, and operations of a wide variety of electrical equipment such as that described above.
• Must have ability to use a variety of tools and instruments such as hand tools of the trade: voltmeter, ohmmeter, current meter, motor analyzer, megger, circuit tracing equipment, hydraulic bending equipment, motorized cable pulling equipment, etc.
• Demonstrated ability to follow written and/or oral instructions.

Certificates And Licenses Required Must possess and maintain a valid California Non commercial Class license, a good driving record and the ability to operate standard and automatic transmission vehicles and may operate a high lift truck. Must have ability to obtain and maintain certification in CPR and First Aid training.(Provided by employer). Must be certified to the National Electrical Code (NFPA 70E) of the National Fire Protection Association (NFPA). California State Electrical Certification, preferred