Electrician (Industrial)

Thompson Construction Group, Inc.; Columbus (GA); On-site; USD 45,000 - 70,000; Full time

Job summary

Thompson Construction Group, Inc. seeks an Electrician to plan, install and repair wiring and control equipment per customer specs and blueprints. You'll work safely on construction sites, following plans and codes to ensure reliable electrical systems.

Responsibilities include routing conduit, pulling wires, making connections to motors, panels and lighting, and testing circuits for safety. Must complete required training and be able to lift 50 lbs and work in varied environments.

Qualifications

• Must be at least 18 years old.
• Completed Construction Electrician Course or 3 years as Electrician Helper.
• Ability to read, write and communicate clearly with supervisor and welder.
• Basic math and calculator use; understand voltmeter/multimeter operation.
• Lift up to 50 pounds; perform in varied environments.

Responsibilities

• Plan installations to minimize waste and follow blueprints.
• Install wiring before walls/ceilings/floors are finished.
• Measure, cut, bend conduit and assemble using tools.
• Pull wiring, splice wires, and connect to equipment and panels.
• Test circuit continuity for safety and proper operation.

Skills

Reading & writing

Math basics

Clear communication

Education

Construction Electrician Course

Tools

Multi-Voltage Tester

Side Cutters

Channel Locks

Nut Drivers

Conduit & Wrench Sets

Volt Meter

Hammer & Screwdrivers

Tape Measure

Job description

Since its foundation in 1986, Thompson Construction Group, Inc. has grown from a small, local company into one of the largest privately held companies based in South Carolina. Our diverse services portfolio includes capital projects, power services, maintenance services, disaster recovery, hydro consulting, and commercial construction. We believe in investing in our employees to help them reach their professional goals, as well as their personal goals. Thompson promotes a work environment that fosters learning, leadership, and development, along with a safety culture that never waivers. Thompson is headquartered in Sumter, South Carolina, with offices spanning the United States, primarily the southeast and central United States.

Position Description

Plan the layout, install and repair wiring, electrical fixtures, apparatus and control equipment according to customer specifications and blueprints by performing the following duties in a safe and timely manner.

Job Responsibilities

• Plan installations to minimize waste, provide future access and avoid unsightly, hazardous and unreliable wiring consistent with code.
• Follow blueprints, ensuring that wiring is installed before walls, ceilings or floors are completed.
• Measure, cut, bend, thread and assemble conduit using hacksaw, pipe threader and conduit bender, assisted by Electrician Helper.
• Pull wiring through conduit, splices wire by stripping leads of insulation then twisting or soldering wires together and applying tape or terminal caps.
• Connect wiring to lighting, power equipment, switch boxes, relays and breaker panels.
• Connect power cables to electric motors or pumps and install grounding leads.
• Install control and distribute apparatus, such as switches, relays, and circuit-breaker panels, fastening in place with screws or bolts, using hand tools and power tools.
• Connect power cables to equipment, such as an electric range or motor, and install grounding leads.
• Test continuity of circuit to ensure electrical compatibility and safety of components, using testing instruments, such as an ohmmeter, battery and buzzer, and an oscilloscope.
• Observe the operation of installed equipment or systems to detect hazards and the need for adjustments, relocation, or replacement.
• Other duties as assigned.
• Minimum Required Tool List:
• 1 each Multi-Voltage Tester
• 1 each 9” Side Cutters
• 2 each 440 Channel Locks
• 1 set 5/16” to ½” Nut Drivers
• 1 set 3/8” to 3/4\" Open End Wrenches
• 1 each #14 thru #10 Lug Crimp Tool (T&B)
• 1 each Needle Nose Pliers
• 1 each Tool Box or Bag w/lock
• 1 each Hack Saw and Blade
• 1 set Allen Wrenches
• 1 set Flat Head Screw Drivers (assorted sizes)
• 1 each Large Phillip Head Screw Driver
• 1 each Small Phillips Head Screw Driver
• 1 set 3/8” to 3/4” Drive Sockets w/ratchet
• 1 each 9” Level
• 1 each 8” and 10” Crescent Wrenches
• 1 pair of leather gloves
• 1 each 25’ Tape Measure
• 1 each Center Punch
• 1 each Hammer
• 1 each Working Flash Light
• 1 each Tri-Square or Speed Square
• 1 each Pad and Pencil
• 1 each Wire Stripper
• 1 each Diagonal Cutters

Job Qualifications

• Must be at least 18 years of age.
• Must have completed Construction Electrician Course at a technical or trade school with at least 1 year of experience in the field or a minimum of 3 years of experience working as an Electrician Helper in the field.
• In some cases, the Electrician may be required to have state or local certifications.
• Must be able to read, write and communicate clearly with supervisor/co-workers and understand direction from supervisor and welder.
• Utilize basic math and a calculator, read tape measure and understand the operation and usage of a voltmeter/multimeter.
• Must be able to lift up to 50 pounds, climb, bend, twist, stand and reach repetitively, operate moving equipment and work in hot/cold/damp/cramped environments.
• Candidate may be required to pass a drug test and criminal background check based on job location/requirements.