Electrician (Industrial)

Thompson Construction Group, Inc.; Columbus (GA); On-site; USD 28,000 - 54,000; Full time

Benefits offered by this job

Medical insurance

Dental insurance

Vision insurance

401(k)

Job summary

Thompson Construction Group, Inc. seeks an Electrician Helper to plan and install wiring, fixtures, and control equipment per customer specs and blueprints. You'll perform conduit work, wire splicing, and connections to motors and panels on diverse projects in the Southeast/central U.S.

Ideal candidates read blueprints, follow safety practices, and can lift up to 50 pounds. The company emphasizes learning, leadership, and career development within a strong safety culture.

Qualifications

• Must be at least 18 years old.
• Completion of Construction Electrician Course or 1 year of field experience as Electrician Helper.
• State/local certifications may be required in some locations.
• Ability to read, write and communicate clearly with supervisor and co-workers.
• Basic math and calculator usage; read tape measure; understand volt/multimeter operation.
• Physically capable to lift up to 50 pounds and work in varied environments.

Responsibilities

• Plan installations to minimize waste and ensure accessibility and code compliance.
• Follow blueprints to install wiring before walls/ceilings/floors are completed.
• Measure, cut, bend, thread and assemble conduit using tools.
• Pull wiring through conduit and make splices securely.
• Connect wiring to lighting, power equipment, switch boxes, relays, and panels.
• Test circuit continuity for safety and compatibility.
• Observe equipment function and adjust as needed.
• Perform other duties as assigned.

Skills

Blueprint reading

Communication

Math basics

Education

Construction Electrician Course

Tools

Multi-Voltage Tester

9” Side Cutters

440 Channel Locks

Nut Drivers 5/16”–1/2”

Open End Wrenches 3/8”–3/4”

Lug Crimp Tool (T&B)

Needle Nose Pliers

Hack Saw & Blade

Allen Wrenches

Screw Drivers assortment

Screw Drivers Large/Small

Drive Sockets 3/8”–3/4” w/ratchet

9” Level

Crescent Wrenches 8” & 10”

Leather Gloves

Tape Measure 25’

Center Punch

Hammer

Working Flash Light

Tri-Square or Speed Square

Pad and Pencil

Wire Stripper

Diagonal Cutters

Job description

• 1 set Allen Wrenches
• 1 set Flat Head Screw Drivers (assorted sizes)

Since its foundation in 1986, Thompson Construction Group, Inc. has grown from a small, local company into one of the largest privately held companies based in South Carolina. Our diverse services portfolio includes capital projects, power services, maintenance services, disaster recovery, hydro consulting and commercial construction. We believe in investing in our employees to help them reach their professional goals, as well as their personal goals. Thompson promotes a work environment that fosters learning, leadership, and development along with a safety culture that never waivers. Thompson is headquartered in Sumter, South Carolina with offices spanning the United States, primarily southeast and central United States.

Position Description

Plan the layout, install and repair wiring, electrical fixtures, apparatus and control equipment according to customer specifications and blueprints by performing the following duties in a safe and timely manner.

Job Responsibilities

• Plan installations to minimize waste, provide future access and avoid unsightly, hazardous and unreliable wiring consistent with code.
• Follow blueprints ensuring that wiring is installed before walls, ceilings or floors are completed.
• Measure, cut, bend, thread and assemble conduit using hacksaw, pipe threader and conduit bender assisted by Electrician Helper.
• Pull wiring through conduit, splices wire by stripping leads of insulation then twisting or soldering wires together and applying tape or terminal caps.
• Connect wiring to lighting, power equipment, switch boxes, relays and breaker panels.
• Connect power cables to electric motors or pumps and installs grounding leads.
• Install control and distribute apparatus, such as switches, relays, and circuit-breaker panels, fastening in place with screws or bolts, using hand tools and power tools.
• Connect power cables to equipment, such as electric range or motor, and install grounding leads.
• Test continuity of circuit to ensure electrical compatibility and safety of components, using testing instruments, such as ohmmeter, battery and buzzer, and oscilloscope.
• Observe functioning of installed equipment or system to detect hazards and need for adjustments, relocation, or replacement.
• Other duties as assigned.
• Minimum Required Tool List:
  • 1 each Multi-Voltage Tester
  • 1 each 9” Side Cutters
  • 2 each 440 Channel Locks
  • 1 set 5/16” to ½” Nut Drivers
  • 1 set 3/8” to 3/4" Open End Wrenches
  • 1 each #14 thru #10 Lug Crimp Tool (T&B)
  • 1 each Needle Nose Pliers
  • 1 each Tool Box or Bag w/lock
  • 1 each Hack Saw and Blade
  • 1 set Allen Wrenches
  • 1 set Flat Head Screw Drivers (assorted sizes)
  • 1 each Large Phillip Head Screw Driver
  • 1 each Small Phillip Head Screw Driver
  • 1 set 3/8” to 3/4” Drive Sockets w/ratchet
  • 1 each 9” Level
  • 1 each 8” and 10” Crescent Wrenches
  • 1 pair Leather Gloves
  • 1 each 25’ Tape Measure
  • 1 each Center Punch
  • 1 each Hammer
  • 1 each Working Flash Light
  • 1 each Tri-Square or Speed Square
  • 1 each Pad and Pencil
  • 1 each Wire Stripper
  • 1 each Diagonal Cutters

Job Qualifications

• Must be at least 18 years of age.
• Must have completed Construction Electrician Course at a technical or trade school with at least 1 year of experience in the field or a minimum of 3 years of experience working as Electrician Helper in the field.
• In some cases, the Electrician may be required to have state or local certifications.
• Must be able to read, write and communicate clearly with supervisor/co-workers and understand direction from supervisor and welder.
• Utilize basic math and calculator, read tape measure and understand operation and usage of volt meter/multimeter.
• Must be able to lift up to 50 pounds, climb, bend, twist, stand and reach repetitively, operate moving equipment and work in hot/cold/damp/cramped environments.
• Candidate may be required to pass a drug test and criminal background check based on job location/requirements.

Benefits

• We strive to provide a competitive compensation and benefits package. This includes but is not limited to medical, dental, vision, life insurance, 401(k), wellness programs and career development.

Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.