Electrical Hardware Technician

American Battery Solutions Inc.; Michigan; On-site; USD 52,000 - 76,000; Full time

Benefits offered by this job

Paid time off

Full medical coverage

Company 401K

Job summary

American Battery Solutions Inc. is seeking an Electrical Hardware Technician in Lake Orion, MI to support BMS hardware development. You will build, test, and troubleshoot PCBAs in a lab, using CAN tools to communicate with BMS hardware during bring-up and validation.

You will work with engineers in a fast-paced environment, maintain lab fixtures, and ensure safety and accurate documentation while handling high/low voltage battery-related tasks.

Qualifications

• Requires an Associate degree in Electronics/Electrical Technology or relevant certificate.
• Minimum 3 years of electronics/electrical hardware lab experience.
• Experience operating oscilloscopes, multimeters, power supplies and electronic loads.
• Hands-on PCB soldering/rework including SMT and through-hole; IPC‑A‑610/J‑STD‑001 familiarity preferred.
• Hands-on CAN tools/interfaces for hardware communication, monitoring, or debugging.
• Ability to read schematics, wiring diagrams, and assembly drawings.
• Strong troubleshooting and documentation skills; safety and battery handling emphasis.

Responsibilities

• Build, rework, and repair PCBAs including SMT and through-hole soldering.
• Assemble, wire, and maintain lab test benches and fixtures for BMS hardware validation.
• Perform functional testing and characterization using test equipment; document results.
• Use CAN tools for communication, monitoring, and debugging during bring-up.
• Diagnose hardware faults and support root-cause investigations with engineers.
• Update PCBAs to implement ECOs and design revisions.
• Maintain records of builds, procedures, and calibration status.

Skills

Soldering & PCB rework

CAN tools & interfaces

Lab testing & measurement

Troubleshooting

Documentation

Teamwork

Safety awareness

Education

Associate degree in Electronics/Electrical Technology

Tools

Oscilloscopes

Multimeters

Power supplies

Electronic loads

Function generators

Job description

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Electrical Hardware Technician

Regular Full-Time Lake Orion, MI, US

Job Summary:

The Electrical Hardware Technician will support the development and validation of automotive Battery Management Systems (BMS). Working in a laboratory environment, this role will be a key part of the hardware development cycle by building, testing, troubleshooting, and updating printed circuit board assemblies (PCBAs). The technician will operate electronic test and measurement equipment and provide hands‑on support to engineers as they design, validate, troubleshoot, and iterate BMS hardware for automotive applications.

Responsibilities:

• Build, rework, and repair PCBAs, including surface-mount and through-hole soldering of components down to fine-pitch parts.
• Assemble, wire, and maintain lab test benches and fixtures used for BMS hardware validation.
• Support functional testing and characterization of BMS boards and subsystems using electronic test and measurement equipment, including oscilloscopes, multimeters, power supplies, electronic loads, function generators, and battery cyclers; capture and document test results.
• Use Controller Area Network (CAN) tools and interfaces to communicate with, monitor, and debug BMS hardware during bring‑up and testing.
• Diagnose hardware faults at the board and component level and support root‑cause investigations with hardware engineers.
• Update and reconfigure PCBAs to implement engineering change orders (ECOs) and design revisions.
• Maintain accurate records of builds, modifications, test procedures, and equipment calibration status.
• Maintain an organized, safe, and compliant laboratory environment, following Electrostatic Discharge (ESD), electrical safety, and battery‑handling practices.
• Support engineers with prototype assembly, cable harness fabrication, and general laboratory tasks as needed.
• Adhere to federal and state regulations.
• Adhere to all company policies, processes, and procedures.
• Performs other duties as requested, directed, or assigned.
• Predictable and reliable attendance.

PositionQualifications:

• Associate degree in Electronics/Electrical Technology, a relevant technical certificate required.
• Minimum of three (3) years of experience in electronics, electrical hardware, laboratory testing, or a related technical field required.
• Practical experience operating electronic test and measurement equipment such as oscilloscopes, multimeters, power supplies, electronic loads required.
• Demonstrated hands‑on experience soldering and reworking Printed Circuit Boards (PCBs), including Surface Mount Technology (SMT) and through‑hole work; IPC‑A‑610 /J-STD-001 familiarity is preferred.
• Hands‑on experience using Controller Area Network (CAN) tools and interfaces for hardware communication, monitoring, or debugging.
• Ability to read and interpret schematics, wiring diagrams, and assembly drawings.
• Strong troubleshooting skills at the board and component level.
• Good understanding of ESD control and electrical/battery safety practices.
• Attention to detail with clear, consistent documentation habits.
• Ability to work collaboratively with engineers in a fast‑paced lab environment.
• Focuses on Quality: Drives work results with a quality focus on actions and results.
• Takes Initiative: Exhibits strong drive for results and success; conveys a sense of urgency and drives issues to closure; persists despite obstacles and opposition.
• Working Safely: Demonstrates safe behaviors. Aware of potential risks and threats in the workplace.
• Delivers Results: Achievement‑oriented, feeling a sense of urgency to reach goals on time, if not before.
• Teamwork: Works cooperatively with others to accomplish team goals and organizational objectives.
• Promoting Teamwork: Facilitating involvement, participation, and assurance of decisions amongst self and others; creating a sense of belonging.
• Communications: Exchanges thoughts, feelings, and information effectively.

Physical Requirements / Working Conditions:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.

• Work with batteries, high- and low‑voltage circuits, and powered test equipment following established safety procedures.
• May need to lift and carry up to 25 pounds and/or position the body to reach items on the floor/below knee level or reach overhead.
• The person in this position needs to occasionally move about in industrial environments, and on uneven terrain.
• Works in a temperature‑controlled office environment, with occasional work in outdoor weather conditions, and in industrial environments.
• Must be able to manipulate and operate electronic test equipment, hand tools, soldering equipment, and laboratory fixtures for testing, calibration, modification, and repair.
• Must have good hand‑eye coordination and manual dexterity to perform fine‑pitch soldering, PCB rework, component replacement, wiring, and cable harness fabrication.
• Must have sufficient visual acuity to read schematics, wiring diagrams, component markings, test procedures, equipment displays, technical documentation, small numbers, letters, symbols, and to inspect PCBAs and components.
• Must be able to maintain attention and concentration for extended periods while performing detailed laboratory testing, troubleshooting soldering, and documentation.
• Must be able to sit or stand for extended periods while performing laboratory and bench‑level work.
• Must be able to respond appropriately to visual and audible indicators, alarms, and changing test conditions.
• Work is primarily performed in a laboratory environment and may involve moderate noise from laboratory equipment and test systems.

Why Join Us

American Battery Solutions (ABS) provides comprehensive 100% employer paid benefit plans to employees and their family, competitive salary and retirement program. ABS employs a diverse and inclusive workforce.

Benefits Overview

• Paid time off includes 3 weeks vacation, up to 72 hours sick, 15 holidays and parental leave.
• 100% company‑paid medical, dental, vision, short‑term disability, long‑term disability, and life insurance.
• Flexible Spending Account (FSA) and Health Savings Account (HSA)offerings.
• Company provided 401K savings plan with immediately vested matching contributions to help you save for retirement.
• Voluntary benefitsofferings.
• Tuition assistance.
• Employee Referral Program.
• Employee development and career growth opportunities.

About Us

American Battery Solutions Inc. (“ABS”) is a manufacturer of advanced batteries for commercial, fleet, and industrial on‑and‑off‑road vehicles. Located in the heart of the U.S. automotive region with facilities in Michigan and Ohio. In 2023, ABS was acquired by Komatsu, a world leader in construction, mining, forestry, and industrial heavy equipment in support of Komatsu’s 2050 carbon neutrality goal. ABS continues to operate as an independent entity serving Komatsu applications while continuing to expand and grow our core commercial, fleet and industrial business.

As we have grown, ABS has assembled a world‑class team of dedicated and experienced engineers. This team is equipped with a deep understanding of high‑voltage, automotive‑grade battery systems from concept development and prototyping, to testing and validation, to high‑volume production. We pride ourselves on developing a diverse team of next‑generation battery experts.

The Location - Lake Orion

American Battery Solutions Headquarters and Innovation Center is located in the heart of South‑East Michigan in Orion Township. Orion Township is a Pure Michigan Trail Town that has a long‑standing dedication to enhancing trails and pathways in its community, which is home to the Polly Ann Trail, Paint Creek Trail, and Iron Belle Trail. The township boasts more than 50 miles of trails. Southeast Michigan also boasts some of the best eating around! Whether your interest is in furthering your education, enjoying one of the many regional sporting events, or enjoying the vast outdoors that Michigan has to offer, you’ll be at the center of it here!

AMERICAN BATTERY SOLUTIONS IS AN EQUAL OPPORTUNITY EMPLOYER.